meat machines used for sale

Mikron C Axis Machine Table - with Heidenhain control 430 - Siemens server motor - Table: 60 x 110 cm - 4th axis, diameter: 50 cm - Weight: 650 kg Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

WEIBERT WJ-D53 Thickness Planers WEIBERT WJ D53 NEUMASCHINE! 400V 5,5 KW (7,5 HP) n = 5000 RPM Planing width 530 mm Max.Spanabnahme 8 mm Planer shaft D = 125mm 4 turn blade shaft Clearance height from 3 to 300 mm Feed speed of 8 and 16 m / min. Feed motor 1.5 KW (2 HP) Dust nozzle by 160 mm Electronic height adjustment of the Thicknesser table with display Machine table, Planer shaft bearing block and table management from GRAUGUÃ?! G & WJ-D53

2130 2x3 M 3D CNC milling plotter built in 2014 in China, is used for machining workpieces in the X,Y and Z axes. Machining is performed on the machine’s vacuum table with dimensions (L x W) of 3000 x 2100 mm, by using a rotary head. The applied electro-spindle with a power of 4.5 kW, is distinguished by its extreme reliability and speed reaching up to 18000 rpm, allowing the desired result to be obtained in a very short time. The CNC milling machine is controlled by a hand-held terminal connected to the WEIHONG NK105 G2 CNC controller. This solution makes the machine’s operation much easier to handle and allows every function to be used. The machining centre is also equipped with among others: an EMI filter to attenuate high-frequency electromagnetic interference and a PANASONIC MDME102GCGM axis servo motor. Technical specifications of the 2130 2×3 M CNC milling machine - wo ...

Duplo 5000, year 2010, 3 towers

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine Details Warehouse number 1105-03703 Machine type CNC lathe - inclined bed machine Make SOMAB Type TRANSMAB 400 Year of construction 2002 Conventional control type Control NUM 1060 T Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WAREHOUSE Technical details Turning diameter 500 mm Turning length 650 mm Control NUM 1060 T Turning diameter above the face sled 240 mm Turning diameter via transverse guide 320 mm Main drive motor 18/24 kW Spindle speeds 3600 rpm Spindle passage 73 mm Chuck diameter 210 mm Tailstock cone MK 4 Total power requirement 30 kW Machine weight approx. 4 t Space requirement approx. 3.60 X 2 X 2 m Information Machine in inclined bed design with NUM 1060 CONTROL HYDRAULICK CHUK PARTS FAENGER SPAENEFOEDERER 12x revolver VDI 30

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Maximum diameter 660 mm scortecciabile

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

We offer you here Bros. Cone winder, at: -Width of the tape: 30 cm -Stainless steel casing machine If you are interested and for more information we are available.

Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.

THICKNESS PLANER type CASADEI R 510 second hand machine volt. 380/50 max working width mm. 510 max. working height mm. 250 min. working height mm. 3 maximum removal thickness 10 mm shaft diameter mm. 120 knives n.4 motor power Hp 5,5 weight kgs. 900

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 25kg Adapter Holder: TCS 2B Model: R950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure ...

surface planer , thickness planer , spindle moulder . machines SCM L'Invincibile second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 l'Invincibile : useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 surface planer model SCM F52 l'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 l’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50

GLUE SPREADER type OSAMA S2R 400 . NEW Year 2016 CE : YES Volt. 400 / 50 max. working width mm. 400 max. working height mm.100 n.02 rubber rollers

Model: R1450-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1450-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm s ...

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

We offer you here Bros. Ice devices of shards of to wireless. If you are interested and for more information we are available.

Model: R1950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 30 ...

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

We offer you here a dough part knitting machines: -Producent: W & P -Type: Rotamat CN -30 dough divider -Ready weight: 30-70 g If you are interested and for more information we are available.

Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

FILM WIDTH 10 cm - 20 cm RECOMMENDED FILM THICKNESS 17μ, 23μ, 25μ PE/PVC film WORKING SPEED 10 m/min. Dimensions of the goods to be packaged: max width 95 cm height 45 cm Power supply 2.2 kW 3-phase 380/400 volts Compressed air connection 6 bar PACKAGING MACHINE FOR FURNISHINGS SUCH AS BATHROOM AND KITCHEN FURNITURE OR DOORS DOOR FRAMES OR TRIM LAMINATE FLOORS ALUMINIUM PROFILES STEEL PROFILES WOODEN PROFILES AND TUBES OF STEEL ALUMINIUM OR PLASTIC Max length infinite Min dimensions (width x height x length) 100 x 18 x 600 MM Conveyor carpet Usable length 1924 MM Total length 2000 MM Working height 915 MM Electric motor from conveyor belt 0,55 kw conveying speed 12 m/min Details of stretch film width of stretch film 200 mm Max diameter of stretch film roll D 230 mm Inner diameter of the roller core 76 mm Recommended film thickness 23/30/35 micron General te ...

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm

Type: LABELING MACHINE Applicable industries: production facilities, food and beverage factories, retail, others Packaging type: box, bag, bag on any flat surface Packaging material: plastic, paper, metal, glass, wood Automatic Quality: Automatic DrivenType: Electric Voltage: 220 V/50 Hz weight: 84 KG Key selling points: Easy to use Core components: PLC, pressure vessel, gearbox, motor, motor, bearing, gearbox, pump Marking accuracy: ±1 mm Labeling Speed: Standard Model: 30~60pcs/min Outer diameter of the label roll: 300 mm Inner diameter of the label roll: 76 mm Machine Material: Aluminum Alloy, Iron

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

Round bending machine

Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm

Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm

Tube bending machine

Lathe

Lathe

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

Lathe

PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine Details Stock number 1105-03806 Machine type CNC lathe - inclined bed machine Make MONFORTS Type RNC 400 AC Year of construction 2001 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from HAGUENAU FRANCE Technical details Turning diameter 420 mm Turning length 600 mm Control SIEMENS 810 D Speed range 70 - 4000 rpm Information With C axis and driven tool holders Tool carrier disc turret VDI 40 (12pcs), bore 40 mm; Power clamping futte DIA 315 MM, chip conveyor coolant device, TAILSTOCK CNC SIEMENS 810 D 24 KW 4000 RPM good condition WITH ACCESSORIES

Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type [ type]: NG200 CNC double Control unit: Siemens 840D Year of construction[construction year]: 10/2001 Rotating diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Orbital diameter over bed: 600 mm Revolver 1 Revolver 2 Counter spindle Counter headstock Tailstock C-axis Powered tools Automatic machine doors – newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Speed range max.: 4500 rpm Spindle head: Size 6/8 DIN 55026 Spindle diameter in the front. Bearing [spindle]: 120 mm Chuck diameter: 200-315mm Spindl ...

Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Mischer / Schläger gebrauchte

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...