meat grinder used for sale

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Lifter for 200 liter meat bins, lifting height: 3450 mm, total dimensions: 1025 mm x 1200 mm x 3950 mm.

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

Mixer meat 70 liter, NEW Capacity: 35kg Dimensions: 78x61x74cm Power: 2.2kW

Meat mixer Sind 120 liter, NEW Dimensions: 860x510x1100 cm Power: 1,5 KW

We are selling here a metal detector from the manufacturer Mesutronic, type Meatline 07 O in a very good, used and functional condition. The machine runs on 230 volts, built in 2016, completely stainless steel, passage 55 mm, touch control, for connection to filling machine, was only used for test purposes, rollable, workshop tested, immediately ready for use, dimensions W/D/H 40/60/140 cm, others on request.

The metal separator was only in use for a short time and makes a new impression Operating instructions available Availability: immediately

GROTE 613-VS2 SLICER WITH 18 PRODUCT HOLDERS (MOST NEVER BEEN USED) AND EXTRA REPLACEMENT PARTS-> 2 PULLYS, PUMP, SEAL, BEARING, BLADE, PULLY HUB ALONG WITH A BOX OF 25 ACCUBAND BLADES. THIS SLICER SHOWS LIKE NEW

Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.

Experience precision slicing with the Industrial meat slicing machine, an essential addition to any commercial kitchen or abattoir. Designed for versatility, this mutton and beef slicer effortlessly handles a variety of meats, ensuring uniform thickness and optimal results for your culinary creations. The robust construction and user-friendly design of this Chinese meat slicer make it a reliable choice for busy food establishments. Whether you're preparing deli meats or creating gourmet dishes, this slicer's durability and performance cater to the demands of your business.

Used separator/muscle demusing machine from Meat Master type M18 / P-100-S. Year of manufacture 1999. Manufacturer's documentation. CE

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

Height 1950 Width 1300 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 45 kw Main material Stainlees Steel Throat Diameter 180 mm Feeding System Hooper Throat Material Stainless Steel

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Mixing Grinder 114 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 145 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after the advanced payment machine is ready for delivery

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Manufacturer: Seydelmann Type: Grinders Mixer 2-speed working worm 1-speed mixing paddle motor, 1.5 kW with 2 mixing arms, independent of working worm Height: 1450 mm Width: 900 mm Length: 1250 mm Voltage: 400V 50Hz 3N Power: 20.0 kW 37 A Throat Diameter: 130 mm Main material: Stainlees Steel Machine weight: 680 kg

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Grinder Rex vinkl

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

dubbel kop slijper kop kan 180° draaien om te snel te wisselen van slijpsteen

ZM punch grinder

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

WINTER GRINDER 1500 AUTO MAGNETIC PLC planer knife sharpening machine was built in 2024 in Germany by Henrik WINTER HOLZTECHNIK GmbH. The machine is used for precision sharpening of planer knives at an angle of ± 90°. This process is performed fully automatically by means of a cup grinding wheel, which rotates at a maximum speed of 2800 rpm. To prevent overheating of the knives, the parts are continuously cooled by a special cooling system. The feed rate, in turn, is steplessly adjustable in the range from 3 to 9 m/min via an inverter. All of this makes the offered GRINDERFIX 1500 AUTO MAGNETIC PLC planer knife grinding machine the best choice for industrial plants involved in professional woodworking. The total weight of the machine is 750 kg. Technical specifications of the WINTER GRINDER 1500 AUTO MAGNETIC PLC planer knife sharpener - PLC controller - grinding angle: ± 90° - ...

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

USI Cumberland Grinder / Granulator 28x20 50 Hp 8mm Grid 2 new dead blades 3 sharpened fly blades One new start / stop control box

Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834 Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - u ...

Suitable for the mixing of pre-cut meat and fat with salt, nitrite salt, spices or additives for the production of burgers, ground meat, sausage, nuggets, kebab, various types of dry sausage, vegetables, cheese products and many more. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles and partial spirals enabling a fast emptying.

Used-refurbished machine Enterprise cutter 1700 kg/h capacity 120 L mixing chamber 6 months warranty Technical data Motor power: 5,5 + 1,1 kW Power supply: 25A Feed height: 1267 mm Dimensions: 770x1350x1330 mm Weight: 480 kg

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x680x1580 mm Weight: 400 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1130x500x1250 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

✨Bauknecht AL 2-1 ✨ Meat Grinder Shop Meat Grinder, Lots of Accessories, 450 W Auction-ID: A7-45427-80

Тype: Seydelmann AU 200 Completely made of special stainless steel Hole plate diameter: 200 mm Hopper content: about 400 L Throughput depending on material type, speed, cutting set up to 10000 kg/ h Speeds: 2-speed working worm and 3-speed feeding worm - independent of each other Bayonet lock of the cutting set Column lifting device Protection device at the outlet Machine dimensions in сm: Width: 255,0 Depth: 170,0 Height: 174,0 Installed power: 57 kW Voltage: 380 V, 50 Hz Machine weight: 1900 Kg