measuring plate used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36300 € : 693.33 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 € : 428.16 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 € : 603.56 € : 2050 mm : 6 mm : 6 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll ...

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 € : 144.75 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 € : 282.24 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A deck press, also suitable for the production of armor plates also suitable for the production of armor plates Make: Becker&Van Hüllen Pressing force 5000 tons 10 floors heatable 3.0 meters x 1.30 meters Control New from Stadthagen

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4.5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 14 mm : 14 mm : 8.4 mm : 10 mm : 9 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 € : 418.56 € : 1270 mm : 5 mm : 5 mm : 4 mm : 5 mm : 4 mm : 4 mm : 3 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3020 mm : 1150 mm : 1110 mm : 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

Description Item # 9369 - COCOA BUTTER PRESS FILTER HOLDING PLATE Manufactured by GSR (Italy) Vertical Press for the filter holding plate mounting Model PMT Year 2013 1.1kW, 400Volts, 50Hz The press for the filter holding plate mounting series PMT has been designed to ensure an easy, fast and correct assembly of the filter cloths on the filter-holding plates, essential condition to guarantee a longer life of the filter cloths. This specific equipment ensures the centering of the filter cloths with respect to the plate, a proper positioning of the cloth as well as the insertion of the Teflon cord to be pressed in the seat, through an hydraulic group, for a perfect fastening of the cloths on the plate with an even tension. The double push button station with simultaneous activation system ensures a safe use in compliance with the most restrictive safety rules

Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement.

conische buiging mechanische elektrische machine met veel gereedschap voor het buigen van profielen Number of rolls: 3 rolls Roll capacity cold: 3100 x 15 mm Roll dia upside: 270 mm Profile bending machine: yes

Container divider suitable for PET and cartons

Functional platesetter, year of manufacture approx. 2000, little used, good condition, only for collection. Base cabinet for plates/films can be provided.

Key data: 500 mm, 200 mm

Magnetic clamping plate with sinusoidal ruler swivel device. Top condition! Dimensions : 500x200mm, Clamping: 110V - Made in Germany

Plate dimensions: 4000 x 1500 x 80 mm incl. one groove with two tailstocks Tip height: 400 mm Auction-ID: A7-49089-143

Heating: gas, 28kW, Burners: 14 pieces, Capacity: max 400 kg, Skewer size: max 700 mm diameter, Skewer height: max 1150 mm, Power: 220V, 50Hz, 1.5kW, Dimensions: 1200 x 1250 x 2350 mm

Roundo PS 310 Number of rolls: 3 Roll capacity cold: 3100 x 18 mm Roll dia upside: 310 mm Dia under roll - side rolls: 340 Length: 4600 mm Depth: 1500 mm Hight: 1330 mm Weight: 9600 kg

Steel Storage Structure for Plates and Materials Type: Structure for storing plates and materials Material: High-strength structural steel Profiles: Welded rolled or tubular steel sections Construction: Reinforced structure with horizontal and vertical bracing Finish: Anti-corrosion paint or epoxy coating Height: 2,000 mm – 4,000 mm Width: According to number of storage bays Depth: Adapted to sheet dimensions Capacity per level: Variable (e.g., 1,000 kg – 5,000 kg per compartment) Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-45

4-roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

Steel plate and chain belt conveyor belt Manufacturer: FMW Förderanlagen GmbH Year of construction: approx. 2019 Total length approx. 45,000 mm Width: approx. 2000 mm For sale here is a steel plate and chain belt conveyor belt with a total length of approx. 45 m and a width of approx. 2 m. For exact data, please refer to the drawing. The conveyor belt is currently still set up and can be visited on request. Disassembly is not included in the price.

inv 6934 : Manufacturer : Biotek Model: Epoch Biotek R Year: 2017 Serial Number: SN1701011 Overall Dimensions (W x D x H): 300X300X200 Equipment Weight: 20 Technical documentation: Incoterm: FCA Auction-ID: A1-49706-207

inv 6976: Plate reader Manufacturer: ALL SHENG Model: Plate Reader Year: 2021 Serial Number: 112-16649-21060002 Overall dimensions (W x D x H): 500 x 350 x 250 Equipment Weight: 10Kg Auction-ID: A1-49706-216

INV 6931: Microplate Reader Manufacturer: PerkinElmer Model: Envision MLD2105-0020 + PC Year: 2022 Serial Number: SN1051106 680 nm Alpha Laser 2 color filter cases Note: delivered without plate Overall dimensions (W x D x H): 1200 x 800 x 800 mm Weight: 50 kg Technical documentation: user manual, maintenance file Incoterm: FCA Auction-ID: A1-49706-204

inv 6943: Microplate washer Microplate washer Manufacturer: Agilent Model: BioTek 50TS16 Year: 2023 Syringe Pump Touch screen control Number of reagents: 1 to 3 24 to 384 well plates Process: • Optimized cellular lavage • Pad change 3 times • Stirring and soaking • Strip wash Overall dimensions (W x D x H): 356 x 406 x 165 mm Weight: 20 kg Incoterm: FCA Auction-ID: A1-49706-210

inv 6935: Plate Reader Manufacturer: Mabtech Model: ASTOR™ ELISpot Reader + PC Year: 2023 Serial Number: SN240305 Overall Dimensions (W x D x H): 300X300X200 Equipment Weight: 20 Technical documentation: no Incoterm: FCA Auction-ID: A1-49706-208

Für alle Heidelberg SM / CD 74 - 102 Formate Suitable for all Heidelberg SM / CM 74 - 102 Sizes Druckplattenstanze / Plate Punch NELA Autoplate Stanze Heidelberg Year 1998 - Serial-No. 2989/19 Für alle Heidelberg SM / CD 74 - 102 Formate Suitable for all Heidelberg SM / CM 74 - 102 Sizes

CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 Baujahr / Year 2001 - Serial-No. 013940157 Plate Format min. 370 × 323mm - max. 930 - 1140mm Plate thickness 0.15 - 0.40mm Up to 15 plates/h Auto loading Without RIP and Dongle. Up to 15 plates/h

Druckplatten Biegeeinrichtung für Heidelberg SM52 Format - Plate Bending device Heidelberg SM52 Size Druckplatten Biegeeinrichtung - Plate Bending device NELA GS-Biegegerät Baujahr / Year 1997 - Serial-No. 1144/41 Druckplatten Biegeeinrichtung für Heidelberg SM52 Format Plate Bending device Heidelberg SM52 Size

Kompaktanlage zur Herstellung v. Stempeln, Eindruckklischees und Photopolymerdruckplatten. Compact system for the production of stamps, imprint clichés, and photopolymer printing plates. Es können sowohl Flüssigphotopolymer (Resin) als auch Photopolymer-Plattenmaterial verarbeitet werden. Both liquid photopolymer (resin) and photopolymer plate material can be processed. Belichter Klischeeherstellung / Photopolymer Platemaking AZ System 2000 Serial-No. 277 Plattenformat / Plate Size max. 23 x 33cm Mit 9 Arbeitsprogrammen Maschinendaten: Maße / Size Breite / Width 52cm, Tiefe / Deep 47cm, Höhe / High 95cm Gewicht / Weight ca. 62kg Elektrischer Anschluss / Eletric supply 220Volt, 1,3 kW

Specificaties: 4 rollen Plaatbreedte: 3600 mm Diameter: 4000 mm Diameter van de bovenrol: 1500 mm Diameter van de zijrollen: 1100 mm Diameter van de onderste middenrol: 1450 mm 7000 ton Maximale dikte: 200 / 270 mm Maximale druk op de bovenste rol: 7300 ton Rolmateriaal 60CrMoV12.5 Hydraulische rotatieaandrijving Software: Beckhoff Besturing: Swiss Bend-IT Technology V.3.4.0 Luchtverbruik: 4 bar / 35 m³/u Afmetingen: 15000 x 7200 x 7890 Gewicht 750 ton IN TOPCONDITIE Number of rolls: 4 Roll capacity cold: 220 mm Roll capacity warm: 270 mm Type: VRM Hy 36-4712 Roll dia upside: 1500 mm Dia under roll - side rolls: 1450 / 1100 mm Driven rolls: Centre top and bottom rolls driven Power needed: 850 kW Length: 15 000 mm Depth: 7200 mm Hight: 7890 mm Weight: 750 ton

Complete metal sheet printing line with in line coater Double color printing units - Mailander 162 In line coater Mailander 460 30m tunnel GAS oven Sheet size: 45x38 inches Capacity: 5000 sheets per hour

Magnetabmessungen: 1500 x 500 mm

Magnetic Clamping Plate Condition untested Location 63843 Niedernberg DE Lot 114

Content consisting of two tailstocks, a digital height gauge from the manufacturer MITUTOYO as well as another marking plate. Attention: The clamping jaws visible in the photos are not included in the scope of delivery! Additional technical specifications: • Measuring range: up to 500 mm • Plate dimensions: 600 x 600 mm • Table dimensions: 1800 x 800 mm, with 9 slots

Magnet dimensions: 380 x 150 x 80 mm

SD 10/30 Magnetic clamping Plate Model SD 10/30 Condition untested Location 72589 Westerheim DE Lot 19

BINDER 00 110-2283 Magnetic Clamping Plate Manufacturer BINDER Model 00 110-2283 Condition untested Location 72589 Westerheim DE Lot 46

• Type: 700 x 70 - 700 x 600 • Quantity: four pieces

sheet width: 2050 mm plate thickness: 8.0 mm pre-bending capacity: 6.0 mm upper roll diameter: 190 mm lower roll diameter: 180 mm bending speed: 5.2 m/min work height max.: ca. 980 mm total power requirement: 5.5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital position display of the ...