We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,630 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
filter plate suitable for SEITZ Orion filter 400x400 S1 first plate More then 300 machines new and second hand on our seema .de
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Flat heating plate with insulating plate, panel radiator, heating plate MEDISEAL GmbH Flat heating plate: MI 563900 C 342990 power: 4,5 kW ( 4500 W ) Operating voltage: 230 V AC 50 / 60 Hz Dimensions: 570 x 330 x 1.2 mm insulating plate: 61021810801 Dimensions: 570 x 330 x 5.0 mm New ! Dimensions ( Packaging ): 600 x 400 x 50 mm
used
Fully functional FARO Arm Measuring Arm Prime High Precision 3D Measuring Instrument Quality Control Year of construction: December 2012 Certification date: August 2014 Number: R04-02-12-28398 Single Point: 0.016 mm Volumetric: +/- 0.023 mm Made in Germany The Best Portable Coordinate Machine (CMM) High Measurement Accuracy, Measurement Stability Reduced inspection times, automatically generates reports Ready to use in a few seconds Measure parts and assemblies quickly, easily and precisely Ideal for complex measurement tasks Solid measuring plate with trolley table, 336 kg Drawer with key Degree of accuracy: DIN 876/1 Permissible deviation: 0.02 mm Actual deviation: 0.00589 mm Checked on 05.03.2013 Made in Germany With various accessories Measuring arm case HP PC Tower Screen Keyboard Lots of software e.g. Cam2 Measure 10, Nvidia Graphics, Windows, HP
used
Measuring table, measuring plate with measuring column and dial gauge holder PAGUS Measuring range: 180 mm Working surface: 125 x 125 mm Working height: 54 mm Projection: 140 mm in wooden box New ! still preserved ! Dimensions: 310 x 250 x 160 mm
used
Measuring table, measuring plate with measuring column and dial gauge holder PAGUS Measuring range: 180 mm Working surface: 125 x 125 mm Working height: 54 mm Projection: 140 mm in wooden box New ! Dimensions ( wooden box ): 300 x 250 x 160 mm
used
Measuring device, measuring plate, device for balancing grinding wheels STANKO ?70-?7? Rail length: 190 mm Rail spacing: 102 mm Rail height: 27 mm above measuring table Measuring table: 140 / 135 x 48 mm Number of feet: 3 ( 2x height adjustable, 1x fixed ) used, checked ! Dimensions: 223 x 220 x 175 mm
used
measuring device, measuring plate, device for balancing grinding wheels STANKO ?70-?7? rail length: 190 mm rail spacing: 102 mm rail height: 27 mm above measuring table measuring table: 140 / 135 x 45 mm Number of feet: 3 ( height adjustable ) used, checked! Dimensions: 225 x 224 x 180 mm
used
Wenzel roughness and contour measuring station for crankshafts Measuring plate made of hard rock Length: 3670 mm Width: 850 mm Flatness tolerance according to DIN 876/1 Target value 48 μm Actual value 32 μm Ident No.: 14280 JFA Dispensing Blocks Item location: 42859 Remscheid More measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!
used
Measuring device, measuring plate, device for balancing grinding wheels PAGUS 465 x 460 x 350 mm 2x clamping surface: 460 x 63 mm Groove width: 14 / 24 mm groove depth: 24 mm distance (groove - groove): 385 mm Clamping height: 350 mm Measuring table: 140 / 135 x 45 mm Number of feet: 4 ( height adjustable ) 4x bore: Ø 16.5 mm used, tested ! Dimensions: 465 x 460 x 350 mm
used
3 D measuring machine make MORA type Mora 3/0102Mash. -No: 9125.4283in foot version with fixed guide rulerBase plate size / granite plate: 1530 x 710 mmMeasuring range: 1000 x 600 x 1000 mmHeight of the plate: 350 mmWith- 5 adjustable feet- Base plate- Measuring gallows- Different touch probe- screen + calculatorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Measuring plate / mounting rulers / measuring strip -3 x lengths in wooden transport box -1 x 2700mm -2 x 1600mm -Total weight approx. 150 Kg Rm3tbzht
used
Measuring device, measuring plate, device for balancing grinding wheels ETP SYSTEM BOEHME 4x mounting prism: 34 x 22 mm, angle: 90° 2x support arm, angle adjustable, distance between mounts: 170 mm distance between support arms: 165 mm Support height: 155 mm above base frame ( in middle position ) Number of feet: 3 ( height adjustable ) used, checked ! Dimensions: 340 x 285 x 195 mm
used
Granite measuring table, granite measuring plate with base HOMMEL DURA 1000 x 630 mm working surface: 1000 x 630 x 100 mm working height: 875 mm with underframe used, tested ! Dimensions: 1010 x 640 x 880 mm
used
Measuring portal with touch probe, Fabr. RENISHAW, granite measuring plate, size: approx. 1000x1000 mm, with evaluation hardware
used
Description: Travel distances: X: 3406 mm Y: 815 mm Z: 1049 mm Table dimensions: 4000 x 2000 mm The machine is equipped with a digital display from the manufacturer 3D-LASERTEC The machine has been serviced annually and is still in a very accurate measuring range Attention: the articles on the measuring plate are not included in the scope of delivery weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,700 x 2,400 mm
used
Measuring plate / mounting plate / Johann Fischer Aschaffenburg -Dimensions approx. LxWxH 2500x1250x500mm -Weight approx. 4000Kg -With thread for workpiece fastening
used
X-travel: 700mm, y-travel: 1000mm, z-travel: 660mm, resolution: 0.039μm, max. load: 900kg, measuring plate height: 600mm, weight: 1.255t, operational hours counter: ca. 10,000h, with documentation.
used
Description: Granite measuring plate type weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 900 x 600 x 750 mm
used
Capacitive Rod electrode type 23.02 ex with WHG approval Manufacturer: Vega Grießhaber KG Type: 23.02 ex Overfill protection by means of a vibrating level switch as a swing fork sensor in compact design with threaded connection, pipe extension, as well as one in the Sensor housing built-in two-wire electronics. The probe is a general-purpose vibrating level switch for all liquids. Regardless of the mounting position she detects the level of border safe and perfectly. The instrument can be full or empty message, as approved overfill or dry running pump protection be used in containers. The position of the switching point is set via the tube extension. The probe offers highest reliability and security in a wide range of applications. New price: approx. 900
used
Measuring scraper 150 mm, still original welded in plastic foil with artificial leather case, with mm and inch - pitch, Steinless - Hardened, with thread table on the back for Metr.- ISO and Whitworth. Smaller batches can also be dispensed. 5.00 €/piece, stock approx. 25 pieces
used
used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...
used
Year of manufacture 09/1992, with new measuring meter type MZ 2000 and screen. Recoil plate 2000 x 4000 mm X trail approximately 3300 mm Y way approx. 1200 mm Z-way approx. 1200 mm Total weight approx. 3.5 t reinforced column 160 mm square
used
used
SincoTec POWER SWING MAG Electromagnetic Resonance Test Bench The POWER SWING MAG is the ideal testing machine for material testing and component testing with low backp and low damping. Due to the resonance principle, the POWER SWING MAG is very energy-efficient, fast and highly accurate. Properties: -High frequencies -Automatic crack detection -Energy efficient -Short test times max force 5 kN displacement 4 mm Frequen range 40..300 Hz Weight 1.5 tons Year of construction 2011 Original price approx. 100.000 € Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
used
Ultrasonic gauge Krohne. Manufacturer: Krohne Type: Reflex radar BM100 A Year of construction: 2004 Voltage: 100/240 V Frequency: 50/60 Hz Maximum pressure: 16 bar Protection class: IP67 These ultrasonic knives were recently removed from a container and are therefore for sale. You are in good condition and fully functional!
used
Vacuum - Measuring device CVC 2 Manufacturer: Vacuubrand Type : CVC 2 II Cat No. 24411004 Status: proven & functional Zubehoer : User manual Optinal: Power cable Measuring connection cable Delivery time: reserved from stock
used
Ernest Bodmer type: MINIV - 350 (tool measurement) Serial number: 3152 ISO/50 Y2d0vum9 The HSK recording is not included. Measurements L x B x H 1250 x 900 x 1900 Tool measuring machine is fully functional. Tool measuring machine is in perfect condition. We love to hear from you.
used
Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price
used
Non-contact position measuring system Manufacturer: Dornier Type: I-W-A Anwendungsgebite are: Axial and radial shaft vibration measurements Monitoring of measuring tolerances Determination of deformation and displacement Measurement of wave and eccentricities Roundness measurement Valve position measurement Thickness measurement Accessories: various transducer and mounting plates Evaluation electronics Connection cable Operating instructions Calibration curves Condition: used More info: see also photos All information without guarantee
used
ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...
used
The OPTIV REFERENCE 763 DUAL Z combines a tactile and optical measurement. The Data acquisition via a switching/measuring switch laser as well as white light sensor (chromatic white light sensor/CWS). Measuring range: 600 x 600 x 300mm. Maximum workpiece weight: 150 kg, when using the Glass plate / transmitted light measurement: 50 kg. Accuracy depending on the measuring procedure: 0.5 -. 1, 3μm. machine weight: 3 000 kg. Dimensions (Lxwxh) machine: 1.805 x 1,918 1,890 mm. service area of min. 600 mm. The machine is active and can by arrangement rootstyle are. If you are interested we can provide the entire machine data to the Available.
used
Torque/angle/preload Analyzer Testing and measuring instrument Brand: BLM Type: 5040 Number of pieces: 2 More info: Please see photos All information without guarantee
used
Hardness tester Manufacturer: Stiefelmayer with drawer Cabinet For more info please see photos
used
Roundness measuring instrument, BALLIGKEITS - & OVALITAETSMESSGERÃ?T Manufacturer: Philip Hafner with DigitameÃ?anzeige HEIDENHAIN Condition: used All information without guarantee
used
ZEISS MC 850 X-AXIS STROKE: 850 MM Y-AXIS STROKE: 1200 MM Z-AXIS STROKE: 600 MM WEIGHT APPROSS. 3800 KG DIMENSIONS (W X H X D): 1.6 X 1.56 X 2.95 MM
used
RACING X/Y/Z AXES 900/900/700 MM MEASURING PRECISION 2.2 + L/300 ?M WORKPIECE WEIGHT (MAX.) 1,200 KG CONTROL SYSTEM VAST MEASURING HEAD POINT/POINT CONTROL MODE CONTINUOUS SCAN MACHINE DIMENSIONS WIDTH 1,640 MM LENGTH 1,740 MM HEIGHT 2,700 MM WEIGHT (APPROX.) 2,000 KG
used
Leitz Coordinate Measuring Machine Leitz PMM-G 50.30.20 Dimesnion: 5000x3000x2000 Machine is in excellence working condition.