measuring equipment used for sale

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

Open spray level 2x2.1x2.2 The overspray in powdering is absorbed via the suction unit. The powder spray stand is delivered on rollers and is thus mobile. - The suction is equipped with a 60 L powder container (rollbar). - The first stage is 4 filters in the suction system. - Above the cabin is the Absolute filter. 1. Dimensions of the powder level width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m3/h Electric motor 3.0 kW 3. Filter 325x600 4 pcs. Type Filter cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type pocket filter

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 3,500 x 1,900 x 2,000 mm electric 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 3,500 x 1,900 x 2,000 mm gas operation 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW = 49,880 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 burner 1 pc. oven is heated with gas burner. 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 4,500 x 1,900 x 2,000 mm electric 1 inner dimension length 4,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m3/hr 10 Electric motors 2 pcs. 2x 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 74 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual f ...

Sourdough boiler W&K with cooling Rye sauer - Boiler double-walled - with käte machine - with hopper for flour - with switch box - Built 2015

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

Machine type Electrode inverter welding rectiveror with bi-power setup Make Merkle Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Adjustment range 20 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes 100% ED at 210 amperes Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter by built-in fan Version of portable assembly line Special accessories Bi-Power-Device Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 5 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with  ...

A quadroblock of Krones SUPERBOLCK is offered All machines are powered by cardio-shafts and please and a synchronous movement of the bottles. This achieves outputs of up to 37,000 bottles per hour. The system includes the following machines: Exhaust Rinser: Kom 560-002 Vacuum Filler: Kom 307-551 Shooter: SV 15 Etyma: Starmatic 24-8-8 Kom. 090-952 Bottle format: 20ml (can be adapted to customer requirements) Capacity: 7000-37000 bottles per hour Built: 1994 Plant condition: The system is completely overhauled Made in GERMANY For more information please contact us. Tel.: +49 6061 968 78 22 or email: v.gurin@allfill.de

Machine type MIG/MAG welding system Make Merkle Type CompactMIG 220 K Connection voltage 3 x 400 volts Setting range 25 - 220 amperes Switch-on time 40% ED at 220 amperes 60% ED at 170 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 90 kg Special Accessories Display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Plate Exposure , Top Condition

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 DW Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 170 kg Special accessories display, automatic wire, VB cable 1.6 mtr. Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 K Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Execution of mobile industrial plant Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 480 x 760 mm Weight 140 kg Special accessories display, automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1  ...

Machine type Electrode inverter welding rectiveror Make Merkle Type MobiARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 330 x 140 x 230 mm Weight 6 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece slag hammer heavy execution 1 piece steel wire brush 2-row 25 pie ...

Used nacuum monoblock MO10/4. New 2010. AUTOMATIC MONOBLOCK FILLING MACHINE is adapted to filling non-carbonated liquids and screwed into PET bottles. The machine has tooling adapted to the bottle and cap pattern. Technical parameters: capacity max. 3000 bottles/h 0,1 L PET 10 pcs of fillers 4 pcs capping heads motor 2,2 kW, 900 rpm power 3x380V/60Hz Compressed air demand 1,5m3/h dimensions 1530x1230x2400 mm weight 950kh.

Used screw feeder for powders / granules, by OMAS TECNOSISTEMI italy, model: DEP-MI. New: 2003. Dosing range: 5 - 1000 ml. Available dispensing spouts: 10, 12 and 14 mm. The device is integrated with a Mettler Toledo scale and an industrial vacuum cleaner for dedusting the dosing area.

Water-cooled pulse - inert gas welder Manufacturer Artec Type Topweld Pulse 5500 Inert gas welding gun MIG-MAG Make: ARTEC Model: Puls 5500 specifications: Welding current range up to 550 A water cooling separate feed frame type DV-W1 with 4-roll wire feed Hose package Feed case Ground cable Device under power ready to be demonstrated! Special price!

Machine type: TIG, AC/DC Welder Manufacturer: MESSER GRIESHEIM Model: Multiwig G 250-1 Built: 1985 Condition: good Offer type: used machine specifications: Type: TIG, AC/DC and electrodes Connection: 400 volts Power: 5-250 Ampere remark: AC/DC, with foot switch, water cooling Drive: 32 Ampere Weight: 150 kg The machine is in a good and ready-to-use condition and can be inspected and demonstrated at any time. We would be happy if our offer finds your interest. Errors, changes and intermediate sale reserved.

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 DW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 220 kg Special accessories Automatic wire Volt and ampere digital display Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part b ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...

Manufacturer: KHS Type: Combi-REV-H1 Com.-No: 510397 Built: 1991 Verschler: Alcoa 15 Type: PP 15/540-91 Com.-No.: SEN 011-007789658 Built: 1991 Capasite: 30,000/H 330 ml 20,000/H 700 ml

Weibert X 134 welder Electrode diameter: 1.5 -2.5 mm Setting range TIG: 5-130 A Mains voltage: 230V, 50 Hz in a suitcase Welding cable with electrode holder Ground cable with ground clamp Hand shield with welded glass wire brush G&1091

A KRONES TRIBLOC is offered for rinsing, filling and sealing glass as well as PET bottles. Rinser 20 grippers Filler 20 valves ( pitch 222 mm ) Lock5 heads. ( PE thread closure) . Possible bottle sizes from 0.33 to 5 L . Built in 1998. Power 6000 Fl/h Before delivery, the machine is completely overhauled and adapted to customer wishes. For more information please contact us at: +49 6061 968 78 22 +49 176 725 19 609

A rinser of the brand ICS is offered for rinsing the bottles before bottling. Rinser has 40 grippers Power: 12,000 fl/h Pitch: 125 mm Built in 2002 Control : Siemens 7 If you have any further questions, please do not hesitate to contact us

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

GIRO net packaging machine, type Girplus RS Classic Attractive appearance due to the central message on the pack header. Possibility to make the header with 1 or 2 flaps (see Picture 1) or without flaps (see Picture 2) Possibility to include or not include handle holes. Allows the use of registered Girfilm at both, one or none of the sides. Flexibility to utilize 90 or 119mm header width Handles up to 3kg without needing inner or outer reinforcement bands. 100% recyclable. Net and film fully made of polyethene. No additional raw material is used. Uses the same consumable materials for all different packaging styles. Thus affording the packer a stock cost-saving and facilitating stock management. Allows the use of self-adhesive labels up to 78 x 36 mm The Girplus-R welding machine offers the packer the possibility of making different bag styles with just one machine. RECOMMEN ...

ITU evaluation device Paper scales Citizen 910 Printer PIO signal output

Sandblasting system, blasting cabin, double blasting cabin, core box blasting cleaning device used The system consists of the blasting cabin for 2 workers with extendable rotary table, work platform and control cabinet. A suction and filter system with cyclone and compressed air purification as well as the blasting device. Hesteller: unknown Type: BFA-2-2 Rotary table diameter approx. : 1,1 m max height of the workpiece: approx. 0.8 m Dimensions cabin approx. 2 x 1.8 x 3.7 m Total dimensions with entry device: approx. 4.9 x 2 x 3.7 m Dimensions pedestal: approx.: 4.9 x 1 x 1.8 m Dimensions filter: approx. 1 x 1 x 2.7 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)

All welding machines are tested for function. Supplied with operating instructions and circuit diagram. Technical data can be found in the attached data sheet. If you have any questions, please do not hesitate to contact me.

specifications: - Welding current 315 A 80% ED - 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg

specifications: - Welding current 315 A 80% ED 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg

specifications: - Welding current 300 A 60% ED - 230 A 100% ED - Welding current adjustable from 10 A to 300 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 180 kg

SWELD welding machine - Mains connection: 415 V (50/60 Hz) 3 Ph. - Transformer fuse: 30 A - Duty cycle: 375 A 40 % 300 A 60 % 230 A 100 % - Protection class: IP 23 S Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Brand: CFT Model: TE Series Manufacture year: 2002 Production capacity: 15 tn per hour The series has been designed to improve the already superior performance of its predecessors, the MANZINI TE. 15 and TE.30. While preserving the important characteristics of its truncated cone-shaped screen, this new design permits a rapid changeover (without removing the paddles) because the narrow end of the conical screen is at the front of the unit, beneath the cover. The series of turboextractors has a peculiar characteristic: product emulsion due to air trapped within the product. In fact, the infeed of product is located on a completely closed cover and the centrifugal action of the paddles against the conical wall produces an impingement effect in the direction of product flow that helps pomace conveyance towards the expulsion channel. Turboextractors are specifically designed for e ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spectrophotometer DATACOLOR Spectroflash SF450, with 2 SF 350 units, 3 IBM PC's with programs and 3 calibration tools

Specially designed for small businesses and rim coaters. Plant complete consist of: Powder furnace width X height x depth 1200 x 1600 x 1200 mm 15 KW Powder cabin width X height x depth 2000 x 2240 x 920 Latest powder gun from romer ProfiGun PM-1 All together for 10,900.00 net plus freight costs and assembly Delivery time approx. 16 weeks.

Polimero A4 imager washer-dryer; good condition; cleaned and tested; Format 320x220mm; washout with magnetic plate; exposers; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

complete thermal plate recording system: Thermal Plate Recorder SCREEN Platerite PTR 8200 E installed 3/2008 maximum plate size 1060x820mm (W1+) minimum plate size 450x370mm thickness 0,15-0,30mm speed 11 plates/hour Running Time 8040h Actual running time 4635h Exposure time 3373h Plate cycles 54343 Currently error is displayed during machine start-up Plate Processor Raptor Thermal 85 GLUNZ & JENSEN for plates up to 85cm wide production date 3/2007 installed 3/2008 Epson Stylus Pro 4880 17" 8-colours production date 11/2007 installed 3/2008 Location: poland Package price: on request

CNC Portal Plasma Cutting Machine Manufacturer: Lind Cutting Type: King P4000 Year of construction: 2017 CNC control Track width: 4,000 mm Running track length: approx. 15 m Working area: 2800 x 12000 mm without suction table 1 x Plasma chamfer unit Pro Cut 2D-N Power source Kjellberg HiFocus 440i Filter system Kompac Air 325 660 4x4/o 18.50 KW

Haver & Boecker SWA/MECII-20 Loading Device Haver & Boecker SWA/MECII-20 Loose loading device with scale for loading trucks or wagons with bulk goods Suitable for free-flowing non-dusty bulk materials Description Brand: Haver & Boecker Type: SWA/MECII-20 Year: 2003 Temperature limits: -10°C / 40°C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Section II L240 x W240 x H310 Haver Nettowage with frame Weighing and evaluating electronics MEC II-20 to control weighing and/or machine functions Advantages • high ease of use • easy programmability • PTB and OIML approval • 99 product type memories • User guidance via plain text display in 6 selectable languages Bt 15 operator terminal For automatic remote variety adjustment, including motor adjustment of the bag length/width  ...

Glue application machine NEW MACHINE MH 6213 4 reels Working width: 1300 mm Double Burste

ARO Reversible Ergoline Type X Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: RESISTANCE welding gunARO/IQR YOC 2014, manual; incl. IQR Harvys turning control unit Additional production formats