measuring equipment used for sale

Demonstration device Working mass: 800 B x 500 H x 600 D External dimension: 1100 B x 1300 H x 900 T Operation: electric Heating power: 6 kW Voltage: 380V Frequency 50-60 Hz Frequency Ultrasound: 20, 5 kHz Ultrasonic power: 2.4 kW Warranty 12 months

Showroom machine Firing furnace powder furnace divisible Romer SLP-90 O D + t convection baking oven Powder furnace new SLS - 90 / O D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months

Showroom machine Powder spray booth powder booth powder plant of Romer KPO-3 1 internal dimensions (mm) width x height x depth 2800 x 2100 x 1000 2 external dimensions of mm width x height x depth 2800 x 2300 x 1600 3 frequency 50 Hz 60 Hz 4 drive electric 5 mains voltage V 400 V + N + E 6 nominal output KW 2.2 7 filter polyester 8 Panel v/h/r/l right 9 filter surface M ² 22.5 10 filter holder quickly 11 filter cleaning pneumatic 12 filter cleaning type-automatic, time interval can be set. -Manually 13 fans type aluminum 14 fans number St. 1 15 doors St. / type no 16 air consumption m 3 /h 10.200 17 outdoor paint RAL 1013 18 warranty 12 months

Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.

; mint condition, ready

; ready for immediate use

; ready for immediate use

Used Tetra Pak C3/Flex Make: Tetra Pak Type: C3/Flex ESL/DIMC F/10V Year of make: 2005 Capacity: 7000 units/hour Volume: 500 ml / 1000 ml Opening: simply twist Format: Tetra Brik Squareline Working hours: 36306 Condition: good used condition

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Ladies and gentlemen, We are pleased to offer you a hand bagging machine. If necessary, we can send you pictures and specifications. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the  ...

; NEW

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

Welding machine u TIG 200 DC Machine is fully functional. Machine is in good condition. We love to hear from you.

System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Dosing system / filling plant Make Derichs in a very good used and functional condition. Fully automatic filling system, completely stainless steel, 200 L hopper, digitally controlled (Siemens OP7), programmable, integrated scale system, filling by weight input. The system is dismantled and ready for dispatch.

Arenco Model: GAB metal tube filler, single filler, manual load/unload, 30L stainless hopper, 24 pockets on rotary conveyor

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...

Tube filling- and closing machine for pre capped ALU tubes. Machines is fitted with a tube loader TZ101, Laetus coding device and various accessories. PLC: Siemens type Simatic S5. Output: 80 tubes/min.

Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...

Technical data: -Welding current 505 A 35% ED 433 A 60% ED 385 A 100% ED -Welding current 6 coarse steps + 6 fine levels adjustable - welding current adjustable from 40 A / 16 V to 505 A / 39.3 V - digital amp + voltmeter -separate stroke of wire feed case - 4 roll wire feed Steplessly adjustable - 2 + 4 stroke â regulation -E - welding equipment - hose water cooled approximately 6 YDS -Ground cable -Pressure reducer -Intermediate package machine - wire feed speed approx. 8 m - connection 400 V / 50 Hz 50 A -Space requirement approx. B 520 x H 1400 X 1000 mm -Weight approx. 170 kg

Capping machine for Tetra Pak line year: 2008

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 280 K Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 40% ED at 280 amperes 60% ED at 230 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 105 kg Special accessories Display and wire automatic Age 6 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

2 pieces

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

NanoFocus μSurf confocal microscope Operation manual laitetori.fi/site/assets/files/6647/operating_manual__nanofocus_surf.p df Technical specifications laitetori.fi/site/assets/files/6647/technical_specifications.pdf NanoFocus® μSurf® confocal microscope offers the unique possibility to precisely measure optically complex surface structures with high vertical and lateral resolution. The number of optical artefacts is minimised. The measurement results and comparisons using surface roughness standards of the Physikalisch Technische Bundesanstalt” show an unique correspondence with the tactile instruments. NanoFocus® μSurf® enables fast, careful and non-contact characterisation, which is most important for sensitive surfaces. Large samples can automatically be measured by stitching basic fields.

Tube filling and closing machine for metall tubes. Machine comes in line with IWKA-cartoning machine, type Cartonpac CPS-R.

For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg

Sell semiautomatic funnel Stuffer equipped with agitator. Voltage 230V. Funnel 45 liters with ClampanschluÃ? for product supply Filling volume of 15 ml 1000 ml. (depending on the filling Pistons) Option 1 - 15-250ml. Option 2 - 50 ml 1000ml. Filling quantities of 1 - 15 pieces the minute / dependent Visco and filling volume. The lifting table can option be purchased with as. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack

Pop Glace (Frozen pop) pleine entière fabrique des batons of glace. Usine d'Occasion entière pour liquide le entièrement rénové. Chaque machine avec 4 ou 5 ou 6 voies jusqu' à l'exigence du client. Piece mécanique rénovée. Partie entièrement rénovée avec électrique the plupart des composants PANASONIC, PLC, écran tactile, photocellule électrique pour Spot. The peut être variable length juste sur l' écran tactile. L'usine est compoused avec 3 machines pour production: 15,000 PCs par heure pour une longueur autour de 280 mm. Nous pouvons également fournir les réservoirs de mélange et aussi le système pour ajouter the couleur et saveur dans chaque pop de glace (moins d'investissement). Les photos sont pour une machine similaire entièrement rénovée. Nous pouvons également vous conseiller sur le film.

Vials filler for inyectables with weight dosing filler and stoppering Output 3.000 vials/h Size range diameter 16 mm / max. 80 mm – height min. 55 mm / max. 200 mm The fill range is 1 up to 1.000 ml with 4 needles Electrical supply 220/380 V 50 Hz Weight 1350 Kg. The machine include a turning table and rabs

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...

PERTEN Inframatic Type Percon 8100 Checked by an PERTEN expert Sample measurements done. The device has been pre-adjusted. For final use, a recalibration with reference samples is required.

Automatic filling plant Logdos Späth GmbH Type K-DOS. F/AL 40/ EX EX protected mobile on wheels Programable X/Y axis and pallet image Very good condition, directly from production!

oven 650 1.0x1.0x5m bogie 6 zones PLC data monitoring Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermi ...

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...

Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit

Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.

A line for filling and packaging creams: 1. Inpucker for jars , type: FES201, producer: Groninger, year:2009 2. filler plus 1 mobile hopper, type: DFV 4005, producer: Groninger, year: 2005 3. Capper, type: MCS202L, producer: Groninger, year: 2005 4. Unscrambler cap, type:ZSK1200 ,producer: Groninger, year: 2008 5. Container and Elevator cap, type: DE120, producer: Groninger, year: 1994 6. Labelling cap, type: Gamma, producer: Promark, year: 2010 7. Depucker, type: Omikron, producer: Promark, year: 2010 8. Labelling base label,type: Gamma, producer: Promark, year: 2010 9. Labelling wrap label,type: Gamma, producer: Promark, year: 2010 10. Printer, type: Smart DateX10, producer:Markem, year: 2008 11. Inpucker, type: Paxinpacker, producer: Unilogo, year: 2010 12. Cartoning machine, type:AVV, producer: CAM, year: 2009 13. Mechanical turning  carton, Festo, year: 2011  ...

Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right

Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma cutter up to approx. 30mm steel Manufacturer Thermal Dynamics Type Thermal Arc Pak 10 XR 3 steps adjustable up to max 100 amperes Power connection 400 volts Special price

respiheror Dräger Evita 4 Edition Engine hours 1880 As good as new

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

• Filler BERTOLASO mod. AMBRA 30/40 – Low vacuum for still wine: • Year: 1990 • Producer: BERTOLASO • Speed (BPH): 6.000 bph • Direction: Clockwise • Used filler BERTOLASO 40 valves with low vacuum filling for still wine. • Mechanical bottle lifting pistons. • Bottling machine all in stainless steel. • Safety protections. • Control panel. • Code T 36

• Filler 36 valves VIRMAURI mod. MUTINA – isobaric: • Year: 1997 • Producer: VIRMAURI • Speed (BPH): 5.000 bph • Direction: Clockwise • Used filler VIRMAURI 36 valvole - isobaric. • Speed: • 4.000 bph for sparkling and 5.000 bph on still wine. • Code T 33