129,000 used machines on RESALE, but how to find them? Machine Search
2006 Emco MCP 100-50 The EMCO MCP 100-50 is a CNC milling machine that is equipped with two pallets. This configuration enables precise machining of workpieces while the second pallet can already be re-clamped. This allows non-productive times to be reduced enormously. Characteristics: Construction year: 2006 Spindle hours: 6152 Travel X: 1000 mm Travel path Y: 500 mm Travel path Z: 500 mm Tool holder: SK40 Furnishing: 4th axis: Yes, built 5th axis: no Pallets: two Wkz.-Magazin: 30 places Bandfilter: And Teat feeders: And Steering: Siemens 840D Tool package: SK40 recording package incl. Find more here - / Contact us at -
This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.
Used Used Case Packer Apsol MCP 2: Year: 2007 Condition: Good Used Case Packer Apsol MCP 2: Model: MCP 2 Year: 2007 Speed: 250 cph (Box of 12 bottles) For boxes of 6 bottles and 12 bottles 2 heads and 12 grips for head Head Type: Adjustable Safety protections Code: JL 296 More details: https://bottlingscout.com
APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and ...
This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details.
Used Case Packer Apsol MCP2 3500 bph General Features of the Used Case Packer Apsol MCP2 3500 bph APSOL built the Used Case Packer Apsol MCP2 3500 bph in 2007 as an automatic case packing machine for glass bottles. This model ensures reliable operation and supports a wide range of packaging configurations. Consequently, high-efficiency bottling lines can easily integrate this unit, as it remains fully operational and ready for use. In addition, its compact design allows manufacturers to optimize floor space without compromising performance. Performance and Format Configuration The Used Case Packer Apsol MCP2 3500 bph processes up to 3500 bottles per hour, maintaining consistent output even under demanding production schedules. Specifically, it handles bottles in 0.50 L, 0.75 L, and 1 L formats, packed in 4Ã3 and 3Ã2 case layouts. Therefore, operators can switch between formats with ...
This 3-axis FAMUP MCP 60 E was manufactured in 2002. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 570 mm. The machine includes a table size of 500 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 60 E vertical machining centre we have for sale. Contact us for further details.
bar material dia.:65 mm turning length:644 mm turning dia. over bed:600 mm turning diameter over slide:430 mm y-axis:100 (+-50) mm turning speeds:2x 5.000 1/min positive location each:2x C-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos. driven tools:2x 12 Pos. turning speeds:2x 4.000 1/min control:FANUC 18 iTB total power requirement:30 kVA weight of the machine ca.:8 t dimensions of the machine ca.:3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"
This 3-axis FAMUP MCP70 E was manufactured in 2001. It features an X-axis travel of 700 mm, Y-axis travel of 480 mm, and Z-axis travel of 640 mm. The machine includes a table size of 600 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP70 E vertical machining centre we have for sale. Contact us for further details.
This 3-axis FAMUP MCP 45 E vertical machining centre was manufactured in 2004. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed range of 50 â 10,000 rpm and a maximum table load of 100 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 45 E machine we have for sale. Contact us for further details.
10 € 
