mc used for sale

SEW Eurodrive control system Serial No.: 0102819

DAVI Promau type MCA3020 4-shaft sheet metal rolling machine. The machine rolls black sheet metal 7 mm, aluminum 10 mm, on a length of 3100 mm, the diameter of the rollers: the upper one 200 mm, the others 180 mm. CNC controlled coiler. Machine with the function of bending sheet metal with side rollers up to 4 mm, and with the function of rolling cones. Beveling the side shaft on both sides, bending with the bottom and side shafts to make cones. Weight 4500 kg. Power supply 5.5 kW Full technical documentation.

Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2

Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2 Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

5-axis pallet machining center MCV 630 V - 5x r.s. Heidenhan iTNC 530 2 x pallet Chip conveyor Tool magazine 24 positions Cone in spindle ISO 50 Central cooling Belt filtration Tool and workpiece probe Flushing the front telescope Axis travel: Axis x . 700 mm y-axis . 820 mm Axis from . 550 mm Rapid traverse x,y,z, 60 m.min-1 Total max. input power of the machine 85 kVA Installation space 4,200 x 3,600 mm Machine height 2,950 mm Machine weight 18,000 kg

Year of Production/SO/GO: 2001/-/2022 The machine is in good technical condition, inspection possible upon agreement. The machine is after the total G.O. in 2022 complete replacement of ball screw, linears and cleaning of rulers. Control system: Heidenhain TNC 420. Speed ​​range: 20 - 13,000 rpm Travels in the axes: X: 750 mm Y: 500 mm Z: 500 mm Table dimensions: 750 x 500 mm Machine weight: 4000 kg Machine dimensions: 3700 x 2200 x 2735 mm. Equipment: Electrospindle according to G.O. in 2022, chip conveyor, internal cooling - water, central lubrication.

The machine is in good technical condition. Axis X= 1016mm Axis y= 610mm Axis z= 710mm Table size: 1270 x 590 mm Control system: Heidenhain TNC 426 Table load: 900 kg Spindle taper ISO-40a Spindle drive power: 15 KW Maximum spindle speed: 8000 rpm. Tool change: 24-fold / SK40 Equipment: Chip conveyor Machine dimensions: 3200 x 2600 x 2200 mm Weight: approx. 7.5 t By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition, after agreement the possibility of testing. OS accessories: GE Fanuc series 18i-MB5-including manual, chip ejector, Nikken series CNC260B rotary table and support bearing, 70 bar high pressure pump, spindle center cooling, air cooling, additional plate, MP12 workpiece probe. X and Y axis laser compensation was made on the machine in 2021, a ball bar is available. The machine is normally worn. Renishaw workpiece probe cycles purchased for the machine. The machine will be released from production after the delivery of a new machine.

The machine is in good technical condition. Table clamping area 1500x670 X-axis travel - 1270 mm Y-axis travel - 610 mm Z-axis travel - 720 mm Hedennain TNC 430 control system Spindle speed 10-8000 / min Number of controlled axes: 3 Central cooling Central cooling pressure 10 bar Spindle taper ISO 50 Tool magazine Number of positions in the tool magazine 30 Dimensions lxwxh - 5000x3600x3330 m Machine weight 11000 kg The accessories of the purchase item consist of: -workpiece probe: m & h inprocess messtechnik -clamps SK50 - 25 pcs. Year of production / SO / GO: - / - / 2001

The machine is in good technical condition. Travel in X,Y,Z axes: 1650 x 810 x 810 mm Table clamping surface: 1800 x 780 mm Max. table load: 1750 kg Max. spindle speed: 24000 1/ min. Spindle motor power: 51 kW Number of places in the tool tray: 24 Steering system: Heidenhain 530 Machine dimensions L x W x H: 7000 x 4000 x 3600 mm Machine weight: 14500 kg By prior arrangement, the possibility of a tour in progress.

Cutting machine Wohlenberg 92 MCS-2 TV, air table, light barriers, program control, machine number 3265-014, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Inv. Num. : 4946 Type: MCV 1000 Quick Producer: MAS Created: 2004 Parameters: Control system: Heidenhain TNC 530 Duty cycle: 11007 h Hours: 4989 h Work table length: 1300 mm Work table width: 600 mm Maximum table load (uniform): 700 kg Spindle drive power: 25 kW Minimum distance between the spindle and the table: 100 mm Maximum distance between the spindle and the table: 810 mm X-axis travel: 1016 mm Y-axis travel: 610 mm Z-axis travel: 710 mm Spindle power: 40 kVA Machine height: 2940 mm Machine length: 2700 mm Machine width: 3080 mm Machine weight: 5500 kg 2019/2020: complete spindle overhaul including tool clamping and spindle motor 2017/2018: Replacement of screws on the X and Y axes Replacing rulers on the X and Y axes Replacement of the seals on the axle covers The machine is regularly serviced

The frame mounted inline Stephan Microcut MCH 20K is suitable for a wide range of applications in the food industry. It combines efficient mixing, fine cutting and emulsifying in one simple operation with minimum space requirement. Typical applications such as: emulstions, dressings, sauces, mayonaisse, ketchup, liquid products and pureed food. Previously used in a processed cheese / vegan cream cheese plant. Rotor - stator principle. Efficient fine grinding. Perfect cut. Homogenous mixing. Stable emulsions. Constant product quality. In the microcut there is no metal-to-metal contact of the cutting elements.Infeed hopper (± 120 liter) with feeding spiral with gear motor for high viscose products and big pieces, who moves the product to the cutting / emulsifiying set. Capacity up to 1.200 kg per hour, depending on product and desired particle size. Motor: 15 kW - 380 V - 27,5 A - 2.925 r ...

x-travel: 800 mm y-travel: 800 mm z-travel: 710 mm Control: Heller Unipro 90 total power requirement: 62 kW weight of the machine ca.: 17 t dimensions of the machine ca.: m A Heller MCP-H 250, built in 1999, is for sale. The machine is expected to be available in February 2024 and can be viewed under power. Description Heller MCP H 250 Machine number 32-44117 Year of construction 1999 Control system: Heller Unipro 90 Spindle taper: SK50 Spindle speed: 45-6000 1/min Pallet size: 630x 500 mm Maximum table load (even): 800 daN Max. interference contour workpiece size: 900x1000 mm NC round table Pallet changing device Tool magazine chain: 52 places Longitudinal stroke axis X: 800 mm Cross stroke axis Z: 710 mm Vertical stroke axis Y: 800mm Machine weight: 16200 daN Power requirement: 62 KVA Furnishing: Measuring device for BLUM TC 50 Linear scales Heidenhain BKW cooling unit for spindle cool ...

Inv. Num. : 7397 Type: MCV 800 Q Producer: MAS Created: 2019 Parameters: Control system: HEIDENHAIN Work table length: 1000 mm Work table width: 500 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 550 mm Machine weight: 4000 kg Equipment: Workpiece probe

Inv. Num. : 7396 Type: MCV 1016 QUICK Producer: MAS Created: 2011 Parameters: Control system: HEIDENHAIN Work table length: 1300 mm Work table width: 600 mm Maximum table load (uniform): 700 kg Maximum spindle speed: 10000 1/min X-axis travel: 1016 mm Y-axis travel: 610 mm Z-axis travel: 710 mm Machine height: 2940 mm Machine length: 2700 mm Machine width: 3080 mm Machine weight: 5500 kg Equipment: Workpiece probe

Inv. Num. : 7395 Type: MCV 1270 SPEED Producer: MAS Generated: Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Z-axis travel: 720 mm Machine weight: 11800 kg Equipment: Workpiece touch probe

Key data: 1016 mm, 610 mm, 660 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 660mm Spindle speed ... 0-8000/min. controlled axes ... 3 cooling ISO 40 L x W x H ... 3080 x 2700 x 2800mm Machine weight ... 5500kg In operation from 2007. Workpiece touch probe Heidenhain 4 axle Walter (chuck diameter 315mm) 2023 new spindle new ball screws in the X and Y axes new cover The machine is in good condition, possible to test under electricity.

The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.

Key data: 630 mm, 630 mm, 630 mm

Heller MCI 16 Horizontal Machining Center, Built in 2006, Control Siemens 840 D, Travel X/Y/Z 630/630/630 mm, Tool changer 80 times, Tool holder HSK 63, Spindle speed up to 10,000 rpm, 2-fold pallet 400 x 500 mm, Rotary table 0.001°, IKZ 63 bar, Conveyor Machine weight 11,000 kg,

Laser, barcode scanner, position scanner, barcode scanner, mobile scanner, mobile computer -Manufacturer: Zebra, mobile scanner 4 pieces with accessories -Scanner: Type MC330L -Charging station: Base-CRD-5SL-01 for 5 terminals -Power supply: PS000086A01 -Transport dimensions: 490/140/H260 mm -Total weight: 4.9 kg

Gebr. Drilling and mortising machine Hollow Mortizing Machine FIELDS MCD Motor power: 1.1 kW (380V) max. chisel insert: 25 mm Table length adjustment: 240 mm Table depth adjustment: 76 mm Vertical stroke: 175 max. wood height: 1,000 mm Drill Center Distance: 82 max. wood width: 160 mm Weight: 185 kg Information according to manufacturer incl. 2 chiseling tools Copy of instruction manual available Good original condition! From private workshop closure Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Description: Serial number: ,A4202.00-02991 IMPORTANT NOTE: The balancer that appears on the right of the ,HOFMANN VK 41-MC7 Vertical Balancing Device is not included in the sale. weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,060 x 1,650 x 1,800 mm

Weight 4 000 Kg HEIDENHAIN iTNC 530 control system Tool exchange 24 positions Hours worked 9500 X/Y/Z - 754/500/550 mm Max. table area: 1000 x 500 mm Max. table load: 400 Kg Max. spindle speed: 10 000 min-1 Accessories: Cooling Workpiece probe The machine is in excellent technical condition, connected, possibility of testing.

This HELLER MCP-H 250 Horizontal Machining Centre was manufactured in 1999 in Germany. It is equipped with a HELLER Unipro 90 control unit and a tool taper SK50. The pallet size is 630 x 500 mm and the spindle speed range 45-6000 rpm. It has a NC rotary table, a pallet changing device and a tool magazin (chain) with 52 places. As additional equipment it comes with measuring device for BLUM TC 50, linear scales Heidenhain, BKW cooling unit for spindle cooling, Knoll coolant system with vacuum rotary filter and sludge discharge, Knoll chip conveyor, BKW cooling unit for cooling lubricant system, work area flushing and 2 pallets. The machine is in good condition for its age. Annual maintenance has been carried out over the entire service life. In 2018, the machine was retrofitted with the latest interface/receiver for the Blum TC 50. It is still under production and can be inspected at any  ...

turning diameter: 254 mm turning length: 2x250 mm control: FANUC 16T-C weight of the machine ca.: 11 t dimensions of the machine ca.: 4.5 x 2.5 x 2.5 m with bar loading magazin: LNS Quick-Load Servo II The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7363 Type: MCFV 2080 NT Producer: ZPS Generated: Parameters: Control system: Heidenhain Work table length: 2200 mm Work table width: 780 mm X-axis travel: 2030 mm Y-axis travel: 810 mm Z-axis travel: 810 mm

Key data: 6000 , 4100 , 800

Gantry/Bridge Mill Make: Okuma Model: MCR-A5CII Year: 2015 Machine Location: Upon Request Additional Specifications Available Upon Request Travels: X: 263.78″ (Table Front/Back) Y: 161.42″ (Spindlehead Horizontal) Z: 31.50″ (Ram Vertical) W: 47.24″ (Crossrail Vertical) Effective Width Between Columns: 143.70″ Table to Spindle Nose: 0″ to 70.87″ Table: 118.1″ x 255.9″ (3000 mm x 6500 mm) Max. Load: 81,400lbs T-Slots: 24H7 Width x 15# Spindle: 30 to 6,000 30 to 10,000 7/24 Taper No. 50 ATC Equipped With Accessories: -Main motor and standard electricals: 30 to 4,000 min-1 -Spindle cooler: Oil controller -Thermo-Friendly specs: TAS-S, TAS-T -Synchronized W axis NC (NC crossrail): Absoscale detection (W axis) -Auto Tool changer: 50 tools -ATC air blower and spindle air curtain: Air blower (blast) -Seesaw pendant operation panel: Vertical travel ...

KOVOSVIT MAS MCV 1016 Quick Vertical Machining Center

This 4-axis Heller MCi16 horizontal machining center, constructed in 2006, integrates advanced features for precision and efficiency. It boasts an HSK63 tool holder with 80 places, a high spindle speed of 10000, and a Siemens 840D control system that provides exacting operational command. The addition of an IKZ system at 63bar and a 2 compartment pallet changer significantly enhances productivity and reduces setup times. Consider the Heller MC16 machine we have for sale. For more information about this horizontal machining center, please reach out to us.

Description: Seriennummer A17129168 max. Kühlleistung: 35 kW Anschluss: 400V 12,0 kW Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 2,200 mm, weight approx.: 400 kg

x-travel: 1250 mm y-travel: 800 mm z-travel: 240 mm control: Siemens turning speeds: 45 - 3600 U/min total power requirement: / kW weight of the machine ca.: 9 t required space: / m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 600 mm, 700 mm

ZPS MCFV 1060 LR Year of construction: 1999 Control: Heidenhain TNC 426 CB CNC Machining Center Travel: X/Y/Z: 1000/600/700mm Spindle speed: up to 8,000 rpm Tool changer: 24 speed Table size: 1270 x 590 mm Mounting: SK 40 Weight: 6.7 tons Conveyor Milling spindle cooling Safety circuit for the use of high-frequency spindles Coolant device via spray nozzles Air supply through internal spindle (ILZ)

Description: Machine with 1,2 or 3 units Useful width: 600mm Parts up to 150mm high can be passed through. As an option (extra charge), the machine can be fitted with a 300 mm high feeder. Brush dimensions: Ext. diam. 300mm and int. diam. 146 or 70mm, length = working width Belt dimensions L x W, mm: 1900 x630 Main motors HP/kW: 15/11 Feed speed variators, m/min: 6-24 or 3-18 Feed motors HP/kW: 1.5/1.1 Brush oscillation, c/m: 60 or 110 Suction per unit below 125 mm w.c. (wet separator recommended for aluminium) 1 Strip-deburring unit, m3/h. min. : 1500 1 Strip deburring unit, m3/h. max. : 2500 1 Brush unit -m3/h. min.: 1000 Approx. Onsite Dimension. (l x w x h): 2,400 x 2,000 x 2,470 mm, weight approx.: 7,000 kg, plate thickness: 150 mm

Description: Serial no. 01.01.0726.201.0442 Perfect for the automation of production processes and the remote control of robots. Easy handling and high user-friendliness. Approx. Onsite Dimension. (l x w x h): 400 x 400 x 100 mm, weight approx.: 6 kg

Description: Serial no. 01.01.0682.202.0349 Perfect for the automation of production processes and the remote control of robots. Easy handling and high user-friendliness. Approx. Onsite Dimension. (l x w x h): 400 x 400 x 100 mm, weight approx.: 5 kg

Description: 3.6 kW, 7.4 A, 8.4 Nm, 4110 rpm Approx. Onsite Dimension. (l x w x h): 270 x 140 x 200 mm, weight approx.: 14 kg

This 4-axis DAH LIH MCV 1020 BA vertical machining center was manufactured in 2007, equipped with a Fanuc Oi-MC control unit for precision milling operations. It offers X, Y, Z-axis movements of 1020 mm, 550 mm, and 560 mm respectively, and includes a 4th axis with chuck. Features include an 8000 RPM spindle, internal cooling, and a chip conveyor. The machine is ideal for sub-contract machining with a large table size of 1300 x 660 mm. Consider this DAH LIH MCV 1020 BA vertical machining center for precise milling capabilities. Contact us for further details.

Lifting height 21 m, 360° rotatable, lifting capacity 4.5 t, With fork and winch (without rope)

Description: Serial Number: 183567 , MCR-A5CII 35x65 (5C kit) with OSP-P300M CNC Controller Travel: X-axis: 6.700 mm Y-axis: 4.100 mm Z-axis: 800 mm W-axis: 1.200 mm Table to spindle nose: 0 to 1800 mm Table Dimensions: Working Surface: 3000x6500 mm Maximum Load capacity: 37.000 kg T-Slots (width x Nº): 24 H7 x 15 Height from Machine Bottom: 950 mm Spindle Speed range: 30 to 4.000 min-1 Taper bore: 7/24 Nº 50 Bearing dia meter: Ø 100 Kit 5C Specifications Spindlehead indexing at every 1-degree (instead f STD 5-degree indexing) Extensin attachment head, L150, 6,000min-1, 26kW (for through spindle coolant system) (i/o STD Extension attachment head L150, 4,000min-1) 90-deg angular attachment head, 1-deg L355, 3,000min-1, 11kW (fr through spindle coolant system) There is Y-axis limitation (i/o STD 90-deg angular attachment, L150, 3,000min-1, 22kW) BC attac ...

x-travel:1270 mm y-travel:610 mm z-travel:760 mm size of pallet:1.320 x 620 mm table load capacity:1350 kg pallet worktable capacity:900 kg spindle taper::SK 50 spindle turning speed range:8000 1/min spindle drive:20/30 kW max. torque on the spindle:306 / 458 Nm feed speeds:1-40.000 mm/min tool change unit:24 Pos. CNC-control:iTNC 530 HEIDENHAIN total power requirement:35 kVA weight of the machine ca.:10 (8+2) t dimensions of the machine ca.:3,5 x 2,4 x 3,1 m CNC vertical machining center with 2 pallet-changer, internal coolant supply, internal air blast, minimum quantity lubrication, 3D touchprobe HEIDENHAIN, tool measuring system RENISHAW TS 27R, direct measuring system, chipconveyor, no accessories, approx. 83.000 hours "machine on", approx. 22.000 hours "spindle on" dimensions and weight for transport: machine: 3500mm x 2400mm x 3100mm without ATC 2500mm ~ ...

bar material dia.:51 mm turning length:644 mm turning dia. over bed:600 mm turning diameter over slide:430 mm y-axis:100 (+-50) mm turning speeds:2x 5.000 1/min positive location each:2x C-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos. driven tools:2x 12 Pos. turning speeds:2x 4.000 1/min control:FANUC 18 iTB total power requirement:30 kVA weight of the machine ca.:8 t dimensions of the machine ca.:3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"

MCFHD 80 CNC - TOS KUŘIM Machining center Medium correction made: 2021 System: TNC 407 Warranty: 6 months Availability: 1 month from order IN GEOMETRIC ACCURACY BY MANUFACTURER MCFHD 80 CNC - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 4,490 mm Overall width: 5,700 mm Overall height: 3,885 mm Gross weight: 20,500 kg Total power consumption: 75 kVA Working range: X-axis longitudinal stroke 1,000 mm Transverse stroke of the Y axis 750 mm Vertical stroke Z axis 750 mm Positioning the pallet clamping base ° 360 x 1 Working spindle: Cone of the cavity in the spindle ISO 50 Number of steps / speed range continuously / 9 - 2,000 n. min-1 Ex. engine spindle. at 60/100% ED 23.5 / 27.5 (AC) kW Max. twisting mom. on the spindle. 1,000 Nm X - Y / Z feed range: Number of degrees / range continuously / 1 - 3,000  ...

Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW  ...

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

Genset Model C22 D5, 22kVA Standby, 20kVA Prime, X2.5G2, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X2.5G2 Engine Air Cleaner - Duty Rating : Heavy Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144D, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coo ...

Manufacturer Krauss Maffei Type KM 800-8000 MC Control MC4 Built in 1999 Closing unit Closing force t 800 Opening path mm 2000 Holm size mm 1120 x 1000 Installation height min/max mm 600/1100 Plate size 1600 x 1510 Spraying unit Screw diameter mm 130 Spray volume cm3 6172 Spray weight gr 5617 Spray pressure bar 1296 Dimensions and weights Dimensions LxWxH m 10.6 x 2.9 x 2.4 Machine weight Kg 47000 Other robot core pulls

C28 D5 Enclosed A044B088 Genset Model C28 D5, 27.5kVA Standby, 25kVA Prime, X2.5G2, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X2.5G2 Engine Air Cleaner - Duty Rating : Heavy Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144F, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, G ...

C33 D5 Enclosed A044B089 Genset Model C33 D5, 33kVA Standby, 30kVA Prime, X3.3G1, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X3.3G1 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144G, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% W ...

C38 D5 Enclosed A044B090 Genset Model C38 D5, 38kVA Standby, 35kVA Prime, X3.3G1, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X3.3G1 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144H, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% W ...