We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,266 used machines on RESALE, but how to find them? Machine Search
used
Description The Mark Tecno MCM Model 3 EEN ID 0078 Status Active Location Oradea (RO) Electric Rotisserie Tecno MCM 3 EEN with a capacity of 18 Cubs, power: voltage: 14.4 kW, 400 V, dimensions (L x w x h): 1098 x 480 x 820 mm, weight: 80 kg. Missing string, otherwise it's perfectly functional. ExWorks. Price is negotiable and do not include VAT. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Watching the product schedule 24 hours prior. We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.
used
JMC 407 overhauled new model / young device Drive: 7,5 KW Weight: 880 kg 4 x reversible knives Truck intake/wheels
new
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
used
Out of stock, we offer spare parts for McIntyre alligator scissors. Main wearing parts such as blades for JMC 150, JMC 200B, JMC 320; JMC 407, JMC 500, JMC 600, JMC 640, JMC 900. In addition you will find control blocks, hoists, foot control, springs, screws for the knife sets, adjusting screws on the knife sets, adjusting screw cutter with brass wear plate, electric box next to other parts always in stock. Inquire. We help in the short term. Also express shipping possible. By phone at 02824/4193
used
Manufacturer: Mc INTYRE Blade length: 150 mm Blade opening: 105 mm Cutting capacity: 25 tons Rods ST 37: 25 mm diameter Number of strokes at ¼ opening: 20 / min Number of strokes at ½ opening: 12 / min Number of strokes at full aperture: 9 / min Dimensions (L x W x H): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Control: foot pedal
new
Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable ...
used
Demonstration machine Manufacturer: Mc INTYRE Dimensions (L x W x H): 3200 x 1000 x 1800 mm Blade length: 640 mm Blade opening: 355 mm Cutting capacity: 240 tons Rods ST 37: 88 mm diameter Number of strokes at ¼ opening: 60 / min Number of strokes at full aperture: 8 RPM Weight: 4000 kg Drive: 18,5 kw / 400 V Control: foot pedal
used
The JMC 320 has a mechanically adjustable holders. The cutting head is operated for single cutting or continuous cutting with a foot pedal. The cutting head is protected by a safety cage. Blade length: 320 mm Blade opening: 180 mm Cutting capacity: 67 tons Rods ST 37: 50 mm diameter Number of strokes at area opening: 70 / min Dimensions L x W x H: 1370 x 720 x 1280 mm Weight: 660 kg Drive: 7.5 kW / 380 V Control: foot pedal
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 2 Number of axis total: 5 Longitudinal travel (X-axis): 750 mm Transversal travel (y-axis): 860 mm Vertical travel (z axis): 850 mm Table divisions (B): 0.001 ° Pallets: number: 12 Length: 630 mm Width: 630 mm Tool changer: Tool magazine number of tools: 334 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 11000 rpm Feeds: X axis: 32 m/min Y axis: 32 m/min Z axis: 32 m/min Spindle motor: 25 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor
used
Compact filter plant McCloskey new! Screening plant for the GALA of construction, agriculture Mobile system area ca 2 m2 2 screen decks
used
MCM Clock 600 14 pallet 500x500 CNC FANUC 16iM 15000 RPM Jfmx Supervisor centro di lavoro multipallet FMS multipallet horizontal machining center in FMS under power in our warehouse Mimu machine tools (Italy)
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 0 Technical data Number of axis total: 5 Longitudinal travel (X-axis): 3000 mm Transversal travel (y-axis): 2000 mm Vertical travel (z axis): 2000 mm vertical travel (Y-axis): 1720 mm Table divisions (B): 0.001 ° Swivel angle (a-axis): 175 ° Pallets: number: 8 Length: 1250 mm Width: 1250 mm Transport weight: 3000 kg Tool changer: Tool magazine number of tools: 640 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 3000 rpm Feeds: X axis: 40 m/min Y axis: 40 m/min Z axis: 30 m/min Spindle motor: 50 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor
used
FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANTFMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003
used
FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C
Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc
used
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
used
1 MCS hydraulic dyeing jigger type Maxi Jigger 3400, roller width 340 cm, working width 320 cm, maximal winding diameter 1400 mm, year 1989, maximal dyeing temperature 98 ºC, dye cycle controller TERMOELETTRONICA type JTronix JP70tc,
Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...
used
Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg
used
x-travel: 2600 mm y-travel: 1600 mm z-travel: 1700 mm Control: Fanuc 16 MB total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 42 x 18 m The system requires a space of approx. 42 x 18 m It is designed for fully automatic operation in 3 shifts. Components with tolerances of
used
x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm Control: FANUC 16i-MB table-size: 500 x 500 mm table weight: 500 Kg a-axis: +45 / -135 ° c-axis: 360 ° distance table / middle of spindle: - mm number of spindle speeds: 10000 U/min/rpm tool taper: ISO 40 spindle drive: 18,5 / 22 kW rapid travel x/y/z: 70 m/min Tools changer: - pos. dimension of workpiece: dia 725 mm total power requirement: - kVA weight of the machine ca.: 21 t dimensions of the machine ca.: m The machines of the Clock series can also be used as 5-axis multitasking machines. The Clock series is characterized by high speed and precision. paired with a very stable machine concept. Thanks to the fast tool change and pallet exchange, the machines achieve a very high productivity. As 5-axis version the Clock 700 is equipped with a very stable Swivel table equipped. The swivel table is double on the axes and thus guarantees ...
used
x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm table-size: 500 x 500 mm tool taper: ISO 40 Control: Fanuc 16i-MB total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
height of tips 400 length 7 m passage bar 105 YEAR 2001
used
two flow pack machines can be used for packing ice cream, chocolates, bars, sweets, etc.
used
60″ x .625″ x 100,000Lb McKay Slitting Line Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling
used
System for the extraction of exhaust air from electroplating tanks and purification of the exhaust air by means of a washing process; Centrifugal fan, motor 15 kW, 1452 RPM
used
X-travel: 2600mm, y-travel: 1600mm, z-travel: 1700mm, max. load: 4t, number of tool slots: 599, max. rotational speed: 8000/min, dimensions: 44,490x16,460mm, with automatic pallet system, buffer shelve, production host computer and other elements.
used
With documentation, the machine should be tested.
used
Cooling capacity: 600 kW Year of manufacture: 2007 Options: with economizer Heat exchanger: shell and tube Refrigerant circuit: 2 pcs. Compressors: 2 pcs. McQuay (screw) Type of refrigerant: R134a Number of fans: 10 pcs. Dimensions: 5.25 x 2.25 x 2.45 m Weight: 4 375 kg Condition: excellent Product quantity: 1 pc.
used
5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155
new
Industrial air conditioner, switch cabinet cooler, M330426G009, Mclean, new Special price The current price of a similar product is € 5.480 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price. 31 x 26 x 89cm, ca 50kg,
new
Industrial air conditioner, switch cabinet cooler, M280426G032, Mclean, new Special price The current price of a similar product is € 5.480 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price. 44 x 30 x 73cm, ca 55kg,
used
CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control type Fanuc 16 I X Axis Stroke 700 mm Y Axis Stroke 700 mm Z Axis Stroke 800 mm Axis B 3660000 Nr. pallets 4 Rotational speed 20,000 rpm High pressure 65 Bar Spindle connection HSK 63 Table dimensions 630 x 630 mm Tool magazine 72 positions Chip Evacuator Accessories
used
Infeed: approx. 1,300 x 800 mm (50"x26"), feed hopper 7 m³ with vibrating transducer, active pre-screen, CAT C9 with 350 hp, side and main discharge belt, magnetic belt, 4-axis transport dolly, total weight: approx. 58 t.
used
used saddle stitcher Brehmer 1992 year 6 stations 1 station for hard cover 1 trimmer 2 sewing heads in production
used
1 MCS high temperature jet dyeing machine type DYNAMICA DYN EF 3XJ HT, 3 chamber, capacity 750 Kg, year 2014, HIDROVARIO nozzles with adjustable section, dye bath preparation tank behind the machine, 2 addition vats with mixer), TERMOELETTRONICA fully automatic dye process controller, machine fully inverter controlled
used
MCM Clock 600 MP14 FMS consisting of 2 machines CNC FANUC 16i-M, 14 pallets 500mm x 500mm Spindle 15000RPM full 4th axis (360.000 pos) Tool Changer: 200 pos. X=600mm, Y=600mm, Z=700mm JFMX supervisor 2001 Under power in our warehouse in Gussago Mimu Machine Tools (Italy), X: 600, Pallets: 14, Pallet size: 500x500, Spindle: 15000 rpm
used
Shell end mills, shell mills, milling cutters -Outer diameter: 100 mm -Inner diameter: 40 mm -Teeth: 10 -Price: complete -Number: 3 pieces -Weight: 4 kg
used
SPECIFICATIONS: Work table dimensions: 600 x 300 mm (extendable) Drilling length max: 250 mm Drilling depth max: 120 mm Motor power: 3 HP (2.2 KW) Rotation head
used
1 MCS high temperature jet dyeing machine type DYNAMICA SPRINT DYN-EF-6XJ-HT, 6 chamber, capacity 1500 Kg, year 2017, dye bath preparation tank behind the machine, 2 addition vats with mixer), TERMOELETTRONICA fully automatic dye process controller, machine fully inverter controlled
used
Blowing and Sterilization station MCF Trade Model 2 Never used This machine allows the washing of glass containers of various sizes by means of a jet of air and steam Automatic blowing and sanitizing station fast model with sterile air for the elimination of any foreign bodies inside the containers also prepared for steam injection to sanitize and heat the containers The blowing station is a machine designed for washing glass containers of various sizes see photo The machine essentially consists of a linear conveyor belt that places the containers on a single row These pass through a tilting group formed by a clamping system that can be adjusted according to the format to be processed Once the containers are overturned they descend onto nozzles with adjustable distance and height in order to better center and clean the containers At the end of the operation the containers return to their ...
used
Horizontal machining center FANUC 160 MC control Pallet size 630 X 630 Number of pallets 10 X-axis travel 1200 Y-axis travel 850 Z-axis travel 800 Maximum equipment diameter 1000 mm, maximum height 1080 mm B-axis continuous Tool attachment ISO 50 DIN 69871 B Number RPM 8000 Number of tools 230 Accessories: High pressure tank Tool integrity check Continuous 4 axis table Manuals and CE certificate MARPOSS header
used
Used production cell MCM CLOCK 1000 FMC N ° 1 machining centers - 4 axes, 16 pallets of 630x630 STROKES: X = 940 mm - Y = 700 mm (from +90 p.t.) - Z = 800mm Shuttle for feeding and storing 18 pallet places on two floors N ° 1 place for loading / unloading pieces with video terminal 148 ISO 50 tools with BALLUF Coding High pressure system through the variable 65 bar tool Scraping chip conveyor Marposs probe for dimensional checks, zero piece etc. Tool integrity check by laser CNC FANUC 16M JFMX 2.0 LINE SUPERVISOR (2017 update) 360 divisions rotating table (indexed) Spindle: 8,000 rpm, variable preload, 25 Kw, (S1) Optical lines pressurized on all axes Year of construction 1997 MANUALS and diagrams
used
Used MCM CLOCK 600 Machining center - palletized Currently still in production. MCM CLOCK 600 NC FANUC 16i-M Spindle speed 20,000 rpm 15/28 KW Cooling inside the spindle no. 2 rotary tables 500 x 500 mm Rapid speed 50 m/min X axis 600 Y axis 600 Z axis 700 B axis 360,000 P. Tool warehouse 40 places hsk 63 Year 2001
used
Machine description: Longitudinal travel X = mm. 10.000 Vertical stroke Y = mm. 2.000 Cross travel Z = mm. 600 Relocation additional for W axis 600 mm. (continuous) Power supply voltage and frequency: 400 V. - 50 Hz. 1) Vertical tool magazine with 600 places HSKA63 - DIN 69893. 2) Device for washing the tool cone operated by high pressure coolant. 3) Tilting head unit - 90 ° A Axis tilting cradle - C Axis positions n. 360,000 4) 4-sided drum with a side of 1100 mm., - Spindle speed: 20,000 rpm. HSK 63A; - Spindle bearings a variable preload; - Equipment for automatic tool balancing control; 5) Ecological-accident prevention protection of the armored type machine for high speed machining; 6) Refrigerating unit for conditioning the spindle cartridge; 7) Spindle with provision for the supply of coolant through the center of the tool; 8) Air-conditioned electrical unit; 9) Scrap ...
used
Code: 0233 Brand: MCR - ITALY Model: EASY EDGE/5 - CE Standard Automatic edge bander for edging panels, veneer edges, PVC, solid wood, abs, etc. - CE Standard Technical data: Max edge thickness mm 5 Max panel height mm 80 Min panel height mm 10 Min panel width mm 80 Adjustable feed speed Composition: Gluing unit: Heat regulator glue tank - Heat regulator roller - Automatic strips loader End cutting unit consisting of 2 motors of 0, 37 kW - Blade diameter mm 125 - Blade inclination Fine trimming unit :allows the trimming of the top and the bottom of the applied edge - 2 motors Kw 0,37 - N° 2 combined Vidia cutters with inserts to 30° plus flat sharp Polishing unit - N° 2 motors - Brush diameter mm 160 Control panel Sound-proof cabin Total absorption A 10 Overall dimensions mm 3100 x 1000 x 1640 h Weight kg 950
used
Brand: McNeil AKRON REPIQUET Model: VAB 500/6 Year of construction: 1991 Tube outer diameter max: 500 mm Cooling length: 6000 mm Spray pump: 11 kW
used
Approx. Onsite Dimension. (l x w x h): 200 x 100 x 100 mm, weight approx.: 1 kg
used
MCM Jetfive Drum Milling Machine :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - M - Head Type: Fourth and Fifth Axis Automatic Head Additional technical notes for the head: Continuously controlled head on both axes - Tool holder: HSK 63 Spindle power: 55Kw Spindle speed: 20000 Number of tools: 760 X axis stroke: 10000mm Y-axis stroke: 2000mm Z-axis stroke: 600+800mm Rapid feeds for linear axes X Y Z: 50m/min Pallet changer: yes Pallet size: 1100 x 10000mm Maximum load allowed: 2000Kg Round pallet: yes High refrigerant pressure: yes Pressure value: 65bar External tank system with filter: yes Cutter type: mobile column Chip conveyor: belt conveyor Presetting: yes Other technical data: Spindle torque 156 Nm Drum table with 4 faces rotating on a horizontal axis Machine equipment: Automatic tool check Workspace Came ...
used
Mirrror MCM Jet Five horizontal machining centers connected in line :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - M - Tool Holder: HSK 100 - Spindle Power: 44 - 35Kw Spindle speed: 14000 - Number of tools: 980 - X axis stroke: 3000mm - Y axis stroke: 1800mm - Z axis stroke: 1800mm Rapid feeds for linear axes X Y Z: 40m/min Pallet size: 1250x1250mm Pallet Type: Continuous Multi-pallet: yes Number of multi-pallet pallets: 28 Pallet System: Fastems Maximum load allowed: 3000Kg High refrigerant pressure: yes Pressure value: 65bar External tank system with filter: yes Chip conveyor: belt conveyor Presetting: yes Other technical data: System consisting of 2 in-line machines sharing pallets and tools :::D DIMENSIONS AND WEIGHT::: Length: 35000mm Width: 11000mm Height: 5000mm