mc used for sale

Machine Details Stock-No. 1105-03852 Type of machine milling machining centers - vertical Make DAH LIH SONGS Type LIEDER MCV 2600 Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis free loaded on truck, ex works Price Technical details X-Travel 2600 mm Y-Travel 870 mm Z-Travel 760 mm table surface area 2800 x 970 mm control HEIDENHAIN TNC 530 spindle turning speed range 12000 rpm spindle drive 15 kW tool adaptor BT 40 Internal Coolant System Feed 20 bar Feed 10 m/min Rapid Traverse 20/20/30 m/min total power requirement 25 kW Additional information used vertical machinig centre witH dual arm toolchanger BT 40 HEIDENHAIN TNC 530 - Dual toolchanger - synchronised tapping - internal coolant with filter - Spindle Oil Cooling 32 TOOLS MAGASIN COOLING TROUGHT THE SPINDLE 20 BAR ...

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.75 kW - 0.55 kW -Input: 380/500 V - 50/60 Hz -Output: 3 Ph: 380/500 V -Number: 1x converter available -Price: per piece -Weight: 3 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from the company GSL (German Standard Lift) -Drive shaft: Ø 25 mm toothed -universally applicable -Number: 9 motors available -Price: per piece -Dimensions: 180/135 mm -Weight: 6.5 kg/piece

Unused Rexroth MCR5H565ZZ33A0M1L01SO533C hydraulic drive

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: multicomp, axial fan type MCFS23092A/2092HBL.GN. Unused, original packaging. -Voltage: 220-240 V / 14.5 W -Number: 4x fans available -Price: per piece -Dimensions: 100/100/H35 mm -Weight: 0.3 kg

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L MCCB LUB 12 LUB 32 -Item No.: 32 427 -Number: 10x adapters available -Dimensions: 60/45/H200 mm -Weight: 0.3 kg

Used packaging machine MC2 DT with transporter MCA4 DB. 3 pieces available. New 2011-2013. Technical data: Type of machine - wrapping machine (double twist) Operation - electromechanical, Mains supply - 230/400 B 3 phases + U Frequency - 50 Hz Operating pressure - 6 bar Flow rate - 0.5 Nl/min Weight - 1700 kg

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Tool changer chain, chain magazine, tool changing system, tool magazine -comes from a MAHO CNC machining center, type: MC 600 -for: max. 48 recordings -Recording: SK40 -Dimensions: 1630/H450 mm -Empty weight: 325 kg

Part: Mitsubishi Mazak PCB board type MC111 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

Part: Mitsubishi Mazak PCB board type MC116 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station

Part: Mitsubishi Mazak PCB board type MC121 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Key data: 900 mm, 560 mm, 480 mm

Inv. Num. : 5373 Type: MCV 1000 POWER 5AX Producer: MAS Created: 2009 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 57709 h Spindle hours: 47727 h Table diameter: 520 mm Maximum table load (even): 400 kg Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 8000 1/min Mechanical feed length axis X: 900 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 480 mm Cone: ISO 50 Number of tools: 40 pieces Tool diameter: 125 mm Max. tool weight: 15 kg Machine height: 3300 mm Machine length: 4600 mm Machine width: 3600 mm Machine weight: 13 t 2020: new spindle

Part: Mitsubishi Mazak PCB board type MC151 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

HELLER MC16 4-axis horizontal milling center YOM 2000 4-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D Longitudinal X-axis 630 mm Vertical Y-axis 630 mm Cross Z-axis 630 mm NC rotary table Tilting B axis 360.000 x 0,001 ° Pallet size 400 x 500 mm Max. workpiece size Ø x height 720 x 800 mm Max. workpiece weight 500 kg Pallet exchange time 9 sec. Turning Speed B axis 40 rpm/min Tool holder cone HSK 63 Tool size Ø x lg. x weight 150 x 227 x 12 mm/kg Spindle speeds, infinitely variable 45 – 24,000 rpm Feeds / quick feeds XYZ: 1 – 60,000 mm/min Feed force 10.000 nm Spindel torque 48/72 nm Spindle drive 30 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Total weight 12.5 tons Accessories / Special Features : -Separate standing 80 position Rack-Type tool Magazine with tool placement door and double Swivel gripper, own SIEMENS PC-Control with screen To ...

end mill, end mill, milling cutter -Outer diameter: 100 mm -Inner diameter: 40 mm -Teeth: 10 -Price: complete -Quantity: 3 pieces -Weight: 4 kg

Part: Mitsubishi Mazak PCB board type MC161-1 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Lifting height 21 m, 360° rotatable, lifting capacity 4.5 t, With fork and winch (without rope)

Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun

Part: Mitsubishi Mazak PCB board type MC301 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

TECHNE MCS-102L 2-Position Magnetic Laboratory Shaker New equipment in its original packaging Reference : MCS-102L This magnetic stirrer is designed for optimal suspension cell culture and the use of micro-carriers. The MCS-102L accommodates 2 x 1 liter culture flasks Speed range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel stirrer platform with culture flask markings Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotary Display: Analog Applications: of biological samples Rotational speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)

Part: Mitsubishi Mazak PCB board type MC303 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Milk Homogenizer Capacity 20.000 lt/h Motor: 90 kW 2 stages Hydroulic control

Part: Mitsubishi Mazak PCB board type MC311 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

PROFIMAT MC610 It is an internal or external cylindrical grinding machine with an extremely compact traveling-column which offers everything that modern production solutions require. The technical features are as follows: - Grinding range: 600 x 1.000 mm - X-axis, column longitudinal travel: 1.000 mm - Y-axis, wheel head vertical travel: 550 mm - Z-axis, column cross travel: 520 mm - A-axis, indexer range (optional): +105 / -90 deg - C axis, indexer, range (optional): 360 deg - V-axis, stroke of head mounted dresser (opt.): 130 mm - Grinding spindle drive power, revolution: 60kW / 8.000rpm - Grinding wheel (d x w x bore), max.: 500 x 200 x 127 mm - Dimensions (width x depth x height): 2.380 x 4.100 x 3.000 mm - Weight (machine without electr. cabinet): 7.500 kgs - Workplace table sizes: 1.000 x 600 mm

Part: Mitsubishi Mazak PCB board type MC323 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 610, Y axis: 510, Z axis: 410, CNC type: Fanuc, Spindle revolutions: 6000

Part: Mitsubishi Mazak PCB board type MC414 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mm y-travel: 800 mm z-travel: 700 mm table surface area: 1760 x 700 mm spindle taper: SK 40 spindle turning speed - stepless: 8000 U/min spindle drive: 15 kW feeds: 1 - 8000 mm/min rapid traverse X/Y/Z axis: 15 / 15 / 12 m/min table load: max. 2500 kg spindle throat: 760 mm ATC: 40 Pos control: HEIDENHAIN, TNC 530 total power requirement: kW weight of the machine ca.: 12,5 t dimensions of machine L x W x H: 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included - The data for this ad was created with ModulMWS - the software so ...

Part: Mitsubishi Mazak PCB board type MC442 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Part: Mitsubishi Mazak PCB Board Type MC442-1 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: Giardina, Type: MCD, Year: 1992, Work piece width min-max mm: 80 - 240, Min.-max. workpiece height in mm: 80 - 240, Feeding speed m/min: 15 - 50, Electrical power consumption kW: 48, FREE TEXT: 6 UV Röhren - 30 KW, Year :1992

Part: Mitsubishi Mazak PCB board type MC446 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Cutting width: 430 mm Cutting speed: 24 m/min Application: for automatic boning of belly, back fat, trimmed leather, cuts, etc. for "manual" open-top boning of round cuts such as ham or shoulder.

Part: Mitsubishi Mazak PCB board type MC446-1 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Dimensions (L,W): 1000 x 800 mm For sale are 51 machine pallets for Burkhard and Weber MCR 120 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part: Mitsubishi Mazak PCB board type MC455-1 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool ...

Part: Mitsubishi Mazak PCB board type MC611 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.