mc used for sale

Aircooled chiller McQuay MCEnergy MONO 073.1 SE ST 256 kW Cooling capacity: 256 kW / 72.79 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. McQuay HSA204QS11YA (screw) Type of refrigerant: R134a Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump Lowara LNEE 65-125/55/P25 VCS4, expansion vessel. Dimensions: 3.07x2.24x2.23 m. Weight: 3119 kg. Working hours: 16221 h. Condition: Good

Out of stock, we offer spare parts for McIntyre alligator scissors. Main wearing parts such as blades for JMC 150, JMC 200B, JMC 320; JMC 407, JMC 500, JMC 600, JMC 640, JMC 900. In addition you will find control blocks, hoists, foot control, springs, screws for the knife sets, adjusting screws on the knife sets, adjusting screw cutter with brass wear plate, electric box next to other parts always in stock. Inquire. We help in the short term. Also express shipping possible. By phone at 02824/4193

FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANTFMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

1 MCS hydraulic dyeing jigger type Maxi Jigger 3400, roller width 340 cm, working width 320 cm, maximal winding diameter 1400 mm, year 1989, maximal dyeing temperature 98 ºC, dye cycle controller TERMOELETTRONICA type JTronix JP70tc,

Cooling capacity: 600 kW Year of manufacture: 2007 Options: with economizer Heat exchanger: shell and tube Refrigerant circuit: 2 pcs. Compressors: 2 pcs. McQuay (screw) Type of refrigerant: R134a Number of fans: 10 pcs. Dimensions: 5.25 x 2.25 x 2.45 m Weight: 4 375 kg Condition: excellent Product quantity: 1 pc.

5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

This 4-axis MCM CLOCK 800 MP4 was manufactured in 2000. It features a Fanuc 16 I control, X-axis travel of 700 mm, Y-axis travel of 700 mm, Z-axis travel of 800 mm, and a B-axis rotation of 366°. Equipped with a high-speed spindle at 20,000 rpm and a high-pressure system at 65 Bar. It includes a chip evacuator and a tool magazine with 72 positions. Contact us for more information about this machine.

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg

Blowing and Sterilization station MCF Trade Model 2 Never used. This machine allows the washing of glass containers of various sizes, by means of a jet of air and steam. Automatic blowing and sanitizing station fast model with sterile air for the elimination of any foreign bodies inside the containers, also prepared for steam injection to sanitize and heat the containers. The blowing station is a machine designed for washing glass containers of various sizes (see photo). The machine essentially consists of a linear conveyor belt that places the containers on a single row. These pass through a tilting group formed by a clamping system that can be adjusted according to the format to be processed. Once the containers are overturned; they descend onto nozzles with adjustable distance and height in order to better center and clean the containers. At the end of the operation, the containers re ...

JMC 407 overhauled new model / young device Drive: 7,5 KW Weight: 880 kg 4 x reversible knives Truck intake/wheels

Manufacturer: Mc INTYRE Blade length: 150 mm Blade opening: 105 mm Cutting capacity: 25 tons Rods ST 37: 25 mm diameter Number of strokes at ¼ opening: 20 / min Number of strokes at ½ opening: 12 / min Number of strokes at full aperture: 9 / min Dimensions (L x W x H): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Control: foot pedal

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Demonstration machine Manufacturer: Mc INTYRE Dimensions (L x W x H): 3200 x 1000 x 1800 mm Blade length: 640 mm Blade opening: 355 mm Cutting capacity: 240 tons Rods ST 37: 88 mm diameter Number of strokes at ¼ opening: 60 / min Number of strokes at full aperture: 8 RPM Weight: 4000 kg Drive: 18,5 kw / 400 V Control: foot pedal

The JMC 320 has a mechanically adjustable holders. The cutting head is operated for single cutting or continuous cutting with a foot pedal. The cutting head is protected by a safety cage. Blade length: 320 mm Blade opening: 180 mm Cutting capacity: 67 tons Rods ST 37: 50 mm diameter Number of strokes at area opening: 70 / min Dimensions L x W x H: 1370 x 720 x 1280 mm Weight: 660 kg Drive: 7.5 kW / 380 V Control: foot pedal

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

end mill, end mill, milling cutter -Outer diameter: 100 mm -Inner diameter: 40 mm -Teeth: 10 -Price: complete -Quantity: 3 pieces -Weight: 4 kg

Travel X/Y/Z: 900mm/800mm/1020mm, rapid traverse: 50m/min, speed: 10000rpm, plate dimensions X/Y: 630mm/630mm, max. tool diameter: 300mm, max. swivel diameter: 1000mm, max. table load: 1200kg, tool positions: 300, tool holder: HSK 100, motor power: 35kW, machine weight: approx. 16000kg. Including chip conveyor, compressed air preparation panel, hydraulic-pneumatic system, cooler and various spare parts. Documentation available. On-site inspection is possible.

x-travel: 1300 mm y-travel: 1300 mm z-travel: 1300 mm Control: Siemens 840D SL table-size: dia. 800 mm table weight: 1500 Kg c-axis: 360 / 0,0001 ° number of spindle speeds: 10000 U/min/rpm tool taper: ISO 50 spindle drive: 40 / 52 kW rapid travel x/y/z: 50 m/min Tools changer: 199 pos. dimension of workpiece: 1400 x 1120 mm total power requirement: 42 kVA weight of the machine ca.: - t dimensions of the machine ca.: 11,9 x 6,1 x 5,2 m 4-axis BAZ equipped with: - CNC control Siemens 840D Solution Line - pallet changer with 4 pallets (dia. 800mm) - rotary table (B axis) - tool changer 199-fold (SK 50) - coolant system - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic hub motor Bosch Rexroth MCR5H470ZZ33B4M2WL12P1 Type: MCR5H470ZZ33B4M2WL12P1 Weight - 44 Availability: 2pcs price per piece Tags: MNR:R921811684 SN:2084083 FD:13W51

CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards, circuit boards made from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 (3 pieces) -DC-DC Converter: Elba euro module PCD 54 CP on breadboard: Krauss Maffei AN 100 -Prop. Amplification: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 -Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/Sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8 kg

Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

Consists of: MCP SmartFilter, multifunctional filter system, compressed air consumption 60 liters per cleaning pulse at 6.0 bar compressed air, installation for indoor, outdoor, material 2 mm galvanized sheet steel, filter cleaning method pulse jet, application smoke, dust, working pressure (kPa): maximum vacuum pressure: 6 kPa., maximum overpressure: 0 Pa. 1.5 kPa for silotop solution) dust bin capacity (l) 50 liter container, filter surface 211.2m², capacity (max. airflow 14000m³/hour, multifunctional filter system for both indoor and outdoor installation, MCP filter system is widely applicable, typical industries are metalworking industry, food industry, pharmaceutical industry, chemical industry, concrete and cement industry, plastics processing industry, woodworking industry and other dust-producing industries, 16 pieces of filter elements, SC141 – antistatic polyester with PTFE ...

Consists of: MCP SmartFilter, multifunctional filter system, compressed air consumption 60 liters per cleaning pulse at 6.0 bar compressed air, installation for indoor, outdoor, material 2 mm galvanized sheet steel, filter cleaning method pulse jet, application smoke, dust, working pressure (kPa): maximum vacuum pressure: 6 kPa., maximum overpressure: 0 Pa. 1.5 kPa for silotop solution) dust bin capacity (l) 50 liter container, filter surface 211.2m², capacity (max. airflow 14000m³/hour, multifunctional filter system for both indoor and outdoor installation, MCP filter system is widely applicable, typical industries are metalworking industry, food industry, pharmaceutical industry, chemical industry, concrete and cement industry, plastics processing industry, woodworking industry and other dust-producing industries, 16 pieces of filter elements, SC141 – antistatic polyester with PTFE ...

Enclosure cooler, Mclean, M280426G032, nVent Hoffmann, mint condition Special price The current price of a similar product is € 4.800 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! We have tested the switch cabinet cooler - it cools immediately! The part was purchased from a company's spare parts warehouse and had been in stock there for some time, but judging by its condition it had never been in operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aus ...

Power supply, power converter, power supply unit, switching power supply, MC3 controller -Manufacturer: Krauss Maffei, power supply unit from injection molding machine -Type: NT 100 -Dimensions: 260/140/H130 mm -Weight: 5 kg

2 x ROE MC 7H dolly on ROE MAG frame with cart (24 pcs x ROE MC7H + 2x fly bar/cart) Auction-ID: A7-45207-21

2 x ROE MC 7H dolly on ROE MAG frame with cart (24 pcs x ROE MC7H + 2x fly bar/cart) Auction-ID: A7-45207-22

Industrial Deburring Stations – Year 2019 SEW USOCOME engine – Pneumatic control – 15 units available - General Description: We offer for sale 15 industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Q ...

New in original packaging Unused The McGee Energy HD is a complete audiophile solution. It consists of two high-quality active monitors in an elegant high-gloss finish and a separate control unit (preamplifier) that centrally manages all connections. Special highlights: • Sound: Powerful, detailed sound thanks to perfectly tuned internal amplifiers (Active Speakers). • Versatility: The compact black control unit offers digital and analogue inputs for TV, PC, CD player or smartphone. • Design: Timeless high-gloss design in white/black – an eye-catcher in any living room or home office. Technical data & connections: • Inputs (Digital): 1x Optical (Toslink), 1x Coaxial – ideal for modern TVs or streamers. • Inputs (analog): 1x line-in (RCA/RCA) for turntable (with pre-amp) or mobile phone. • Outputs: Dedicated 5-pin XLR connection to the speakers (cable included) ...

SEW Eurodrive Movidrive Compact Type MCS40A0015-5A3-4-00 , Made in Germany Auction-ID: A7-45483-64

ZEISS Axiovert 200M, LSM 5 Live, MCU 28 Laser Microscope Fluorescence Untested from Laboratory Closure Accessories included Auction-ID: A7-45427-55

SEW Eurodrive MOVITRAC LTE-B+ MCLTEB0004-2B1-1-00 , 0.37 KW , Made in UK Auction-ID: A7-45483-59

Empas MCB 1000 – in good condition Only 771 working hours Hot water up to max. 108°C Maximum pressure: 150 bar Water output: 12 litres/min Equipped with water softening system (liquid and electronic) 1000 litre storage tank Fill/Feed Pump: Honda, 620 litres/min Electric start Auction-ID: A1-40134-71

We can provide them with suitable Glass Bestcut for Busser MKH Finecut and for Stephan Micro-cut machines Supplying suitable sheath heads and cutting rings Furthermore, it is also Karl Schnell Finest Shredder Type FD 175 and FD 225 with 3 step cutting system in these the last stage as rotor / stator system is installed. Just like repair / refurbishment / and sharpening as well as regrinding of the cutting heads

Etikettierer (semiautomaton) to application of round etiquettes 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

Etikettierer (semiautomaton) to application of etiquettes on all angular bundles and especially for the Nachlabeln of tubes suitably 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

Auction-ID: A1-43573-220

Spare parts Auction-ID: A7-45223-27

Auction-ID: A1-41275-602

Auction-ID: A1-43992-130

Auction-ID: A1-42012-142

Auction-ID: A1-44832-82

Auction-ID: A1-44832-84