126,731 used machines on RESALE, but how to find them? Machine Search
General overhault Exchange engine DEUTZ/Lombardini F4M1008F/LDW1404 without starter, alternator, incl. Fuel-injection-system MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 info@miw-zeven.de MIW-Zeven
Torque: 23 Nm volt: 146 V ampere: 20 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ampere: 20 A volt: 146 V Torque: 23 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de
working length: 4200 mm Working width: 2500 mm Working height: 850 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...
The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...
CONVEYOR BELT / CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! For many applications in industry, agriculture and for woodchips. On request we manufacture the conveyors / conveyor belts to your individual measurements. (All lengths, widths and designs possible) Available also with pimples, studs or textured surfaces. We ship worldwide we deliver worldwide, please ask for shipping costs!
The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...
POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.
MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...
FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green
Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts
used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
The surface inspection system is used for 100% control of films. It detects, classifies and logs optical errors with an uplight illumination (top plus bottom). - Modular architecture - Optimal lighting technology - Process synchronization - Real-time error analysis - Automatic error marking / label control - Different error views Circumference: - 2 inspection stations Each 2 x High Speed 80 MHz CCD line scan camera with 4096 pixels (18,000 scans/sec.) Lens adapter, lens, mounting kit and workstation software - Lighting 2 x high-clocked illumination fluorescence with cylindrical lens 2500 mm - Inspection frame - FSP 600 Server
Built in 2009/2005 Size min. 100 x 120 mm Max 300 x 430 mm Thickness Film thickness 20-100 mµ Mechanical speed 25,000 CPH Equipment 10 stations rollstream ROS 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station 4 MTD AWS OWK built in 2005 JET feeder 8 JEF-450-FVM SA190 built in 2005 foil wrapping machine CMC 2800 with two feeders built in 2009 twin stacker CMC
Thermo Fisher Scientific/Dionex Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3,000 ml/min (capillary) Accuracy of flow rate: < 0.1% Precision of flow rate: < 0.1 % Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used Scope of delivery: (See pictures as pictured) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.
Equipment twin multi disc unwind station MTD-AWS-OWK 2 MTD AWS OWK Combination unwinding station 1 MTD-ZSF-LI-MSD Stack pacer LAT 1 LAT-2:1
Krones Dublikat Triblok 40/40/8 of Pofamia. Year of construction: 1999 Power: 1, 5l-7000b / h
Used stainless steel blancher, type BR.11, made by Femia. New 1978. Dedicated to leafy vegetables, up to 3t/h. Possible processing of all vegetables - including cooking beetroot slices. Efficient, with new buckets - 100 pcs.
Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...
FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANTFMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003
FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C
Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85
Good quality of all kind of yeast and non yeast doughnuts due to complete automatic baking process Proofing Feeding Automatic Baking Turning Unloading
FRIGA SYSTEMS 6H-35.2Y Brand:FRIGA SYSTEMS, BITZER Type:6H-35.2Y Stock number:M22-1301 Cooling capacity:70.0 kW Application:Cooling Number of fans:6 Refrigerant:R449A, R452A Refrigerant Content:55 l Voltage:400 Volts Power consumption:22,5 kW Motor power:25 kW Dimensions:2600 x 1600 x 1670 mm Weight:863 kg Year:2009 Number in stock:1 piece(s) Price:Quotation request Description: Very nice Friga Systems condensing unit, equipped with a Bitzer 6 cylinder piston compressor, condenser (6 fans), fan speed controller, liquid vessel 55 liters and a switch box. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +40°C. Visit also our website: used-refrigeration
Producer: BONGARD Weight: 160 kg Length x width x height: 1230 x 780 x 550 mm Power supply: 400V/50 Hz Convection steam oven - Heater rods 10.30 kW - 4 shelves inside dimensions 400 mm x 420 mm - Height between the shelves 90 mm - Temperature up to 250 ° C Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 ABC.inter-wiba.com.pl Info@inter-WIBA.com.pl Tel. 0048 33 8125860
Creo Lotem 400, year 2004 Model: Lotem 400 fiber head 4 page format, Manuel Loading Minimum plate size: 381 x 318 mm Max plate size: 750 x 622 mm F speed: 18 plates/hour resolution: up to 3556 dpi approximate number of plates produced: 107000 With HQ level 3 RIP version 7 installed on PC
Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...
Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x ...
AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage
Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.
Worker-Federhenn pneumatic Cap scissors with table on casters to abbreviate window hardware L x W x H: 170 x 70 x 135 cm Weight approx. 100 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Weight range: 0.25 to 3 kg Bag sizes: 60 x 25 x 160 mm min. 220 x 130 x 450 mm max. Application: Dry, free-flowing products, powdered, granular or piecemeal Typical examples: flour, sugar, tea, flakes, detergent, building powder, spices, sweet fruits
Many thanks for your interest on our Frisse double Z kneader, please find follow our offer: Manufacturer : Richard Frisse Herford Type : ZK 25 Kneader Year of manufacturing : 1986 Electrical : 380 VAC complete volume : 250 l usable Volume : 200 l Dimensions : ca. 2030x1000x1300 (l/w/h in mm) Weight : ca. 2000 kg Different : Condition OK trough tiltable We offer this machine in as is – where it is” condition, without warranty ex Warehouse Hess. Lichtenau (EXW), unpacked
Perfect for your labeling needs FleXpress incorporates our combined many years of expertise in laser technology: We have further developed proven basic elements and systematically tailored them to the requirements and guidelines of the European market. The result is convincing: With FleXpress you get a reliable, easy-to-use product with a very good price-performance ratio. It is adapted to your individual customer requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. User-oriented through and through Best usability and a high level of service orientation were the focus of FleXpress' development: The machine housing can be put into operation anywhere in your production to save space. Of course, the FleXpress meets the requirements for safe working in laser safety class 1. In addition, you can use the clear laser software ...
- Sturdy aluminum profile housing - Front loading via sliding door Further options for the machine frame: pneumatic lifting door or turntable individual customer wishes possible, e.B. Special dimensions of the marking chamber or lateral loading - Fiber laser 20 Watt with IPG fiber module (also available with 30 watt or 50 watt fiber laser) - Automatic Z-axis with 300 mm travel Another option: Turning unit for segmental labeling of the surface of cylindrical workpieces - Control via labeling software - Lens 160 mm (further lenses possible) - Perforated grid base plate (stainless steel) for workpiece mounting -LED interior lighting - Interior prepared for suction -Stable articulated arm with 23" monitor, mouse and keyboard, - Windows 10 operating system - Marking software Weldmark by Raylase On request also: Commissioning, instruction and trainin ...
Laser system 50 Watt, FOBA DP50 for marking and engraving Ideal for beginners or as an extension Deflection unit Scanlab, 254 mm Rodenstock lens with MB RAM and 17" monitor arm, Diode pumping chamber only about 2500 hours in use ready for use, built in 2003 Options: - Suction - other lenses - Machine table (various versions) - Double head/beam splitter Laser system completely cleaned and tested 6 months warranty excl. pumping chamber, place of warranty Lüdenscheid VAT will be shown Delivery EXW, collection possible On request also: Commissioning, instruction and training, maintenance concept, sampling of your workpieces
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...
Pure water unit ENVIROFALK Performance in continuous operation 15 sqm / h max 18 sqm / h CA 2 trailers full of material Year 2009 / was for 1 year in use then the production has been discontinued. complete with all documents and control New price 260.000,-€
Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO
Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now
-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging
High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...
The FALCON 500 series is a new generation of micro Vickers / macro Vickers / micro Brinell hardness testing machines with integrated load cell and test loads of Vickers / Knoop (depending on type): 1 g 62.5 kg (also in one device) The device improves the conventional hardness testing and is aimed at the reduction of operator influence on the test results. The unique system to the test load application includes an electronically controlled application of force and excellent force sensor technology for absolute accuracy. Continue to the FALCON hardness testing machine offers a superior quality of mechanical and optical components and makes it to the reference instrument of this class. The innovative hardness testing software IMPRESSIONS with "Workflow control" allows the storing of results, creation, storing programs Quality at a fair price - approximately 30% cheaper compared to ...
maximum number of results exceeded
please refine your search
