Model
(Manufacturer: MAZAK)
used
We are pleased to offer a late-2024 Mazak QT-Ez 10MSY CNC lathe with only 637 cutting hours, located in USA. This is an exceptionally clean, well-maintained machine that is currently installed, under power, operating properly, and available for immediate delivery. It holds excellent tolerances and is equipped with an extensive range of valuable options and accessories. The machine features a Y-axis, live tooling, and a second/sub-spindle, allowing turning, milling, drilling, and tapping operations to be completed in a single setup. It is equipped with a Mazatrol SmoothEz CNC control, a 10-inch main spindle chuck, a 6-inch sub-spindle chuck, and a 12-position turret. Key Specifications Manufacturer: Mazak Model: QT-Ez 10MSY Year: Late 2024 Cutting hours: Only 637 CNC control: Mazatrol SmoothEz Maximum swing: 27.4” Maximum machining length: 20.78” Maximum bar ...
The machine is in good technical condition; testing is possible by prior arrangement. Control system: Mazatrol MATRIX 2. Table clamping surface: 1300 × 550 mm. X-axis travel: 1050 mm. Y-axis travel: 530 mm. Z-axis travel: 510 mm. Spindle speed: 10 – 12,000 rpm. Number of controlled axes: 3. Through-spindle coolant: Yes. Coolant pressure: 15 bar. Spindle taper: ISO 40. Max. table load: 1200 kg. Tool magazine: Yes. Number of magazine positions: 30. Number of pallets: 2. Machine weight: 7700 kg. Coolant enclosure (required for chip evacuation). Rear chip conveyor outlet (left and right). Preparation for optical probe (MMS-B OMP60). Automatic tool length measurement and breakage detection. Automatic pre-drilling cycle with load detection. Synchronized tapping. 2-pallet changer with safety enclosure. Preparation for high-pressure coolant. Renishaw OMP 60 probe. Renishaw CAT 40 tool shank. ...
Key data: 915 mm, 6000 mm
1 turning and milling center Make: Mazak Model: Integrex 650 H Year of Make: 2004 CNC control. Mazatrol 640 NT-Pro Turning diameter: 915 mm Turning length: 6000 mm Equipment / Accessories: Drill rods Tool measuring device Tool Changer 2 automatic setting sticks diameter 190 – 350 mm 1 automatic setting stick diameter 50 – 268 mm 1 manual setting stick diameter 400 - 610 mm 1 three-jaw chuck diameter 630 mm Cooling lubrication system Coolant tank 1150 l Coolant pump 70 bar otherwise according to the technical data in the appendix. Machine has been regularly serviced and is in very good condition.
Key data: 660 mm, 995 mm
We hereby offer this neat CNC lathe and milling machine. It is a Mazak Integrex 200-IV S from 2010 with the Mazatrol Matrix control. Technical data: Turning diameter: 260 – 660 mm Max. turning length: 1495 mm Bar Passage: 65 mm X-axis travel: 580 mm Y-axis travel: 150 mm Travel Z-axis: 1,045mm Travel W-axis: 1,050mm B-axis travels -30 to 210° Main and sub-spindle: 5,000 1/min. Milling spindle: 12,000 1/min. (Capto C6) Tool magazine: 40 tool positions We can imagine that you would like more information or would like to view the machine. In this case, please contact us with your company details so that we can contact you. About Mamach Machinehandel B.V. : With over 40 years of experience in the CNC machine business, we are now one of the leading suppliers of metalworking machines in Europe. Our success is based on high q ...
Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe
used
Key data: 1120 mm, 510 mm, 510 mm
CNC vertical machine center. Control unit - MAZATROL M32B Dimensions: 4000x3000x3000mm Table: 1460x510mm Max material weight: 800kg Automatic magazine: 24 tools Tool holder: CAT 40
Key data: 420 mm, 1538 mm, 3300 1/min
Stock No.: 4038 CNC LATHE Manufacturer: Mazak, Type: QTN-350MY Serial No.: -, Year of Make: 2006 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm Dia. Turning length 1538 mm Main engine power 30 Main spindle speed range 3300 rpm Spindle bore 105 mm dia. C axis - main spindle movement 0.001 Tool turret with 12 stations Motor Power Driving Tools 7.5 Powered tools 4500 rpm Control Mazatrol 640T Nexus Controlled in X-Z-C-Y Accessories: Hydraulic Main Center Chuck 300 Driving angle tools 1 piece Driving Tools Straight 1 pc. Controlled tailstock Hydr. Bezel SMW SLU-32 50-200 mm Dimensions: Length: 4300 mm, Height: 2400 mm, Width: 2600 mm, Weight: 8600 kg
Key data: 1050 mm, 530 mm, 510 mm
CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, right - Cooling by the spindle 15 bar - Total spindle runtime 8,074 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Mazak Laser Cutting Model: SUPER TURBO X-48 HI-PRO SUPERCHARGED - CO2 Power : 2000 W Working range : 2500×1250 mm Year of construction : 1995 Available: from mid-December 2026 - Currently in use – Visible in use . All manuals available.
Key data: 1050 mm, 530 mm, 510 mm
Mazak VCN 530C CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, left - Cooling by the spindle 15 bar - Kitagawa NC Rotary Table MR 200 - Total spindle runtime 3,454 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Key data: 660 mm, 1500 mm
X-axis 580 mm Y-axis 150 mm Z-axis 1,545 mm B-axis -30 to 210° W-axis 1,490 mm Main spindle Drive power 22 kW Max. spindle speed 4,600 rpm Max. bar passage 52 mm Sub-spindle Drive power 18.5 kW Max. spindle speed 5,000 rpm Milling spindle Drive power 18.5 kW Max. spindle speed 12,000 rpm B-axis 0.0001° Interface for bar feeder Parts catcher Chip conveyor 50 bar high pressure pump 5-axis simultaneous machining Full C-axis bending spindle Gear Hobbing, Abwalfräsem Milling spindle synchronized threading Cylinder interpolation Preparation for multiple and flash tool holders 1 pcs LNS Quick Load Servo 3 Short Bar Loader
Key data: 380 mm, 1000 mm
Main spindle Drive power 26 kW Max. spindle speed 4000 rpm Max. bar passage 77 mm Spindle nose A2-8 Revovler Drive power milling drive 5.5 kW Max. speed driven tools 4500 rpm Tool stations 12 Mazatrol Matrix Control Main spindle with full C-axis Tooleye Tool Measurement Chip Conveyor, Right Discharge Coolant pump 15 bar Interface for bar feeder Parts catcher Tailstock 3-jaw chuck B-210 Tool holder package: 7 fixed + 3 driven tool holders CE mark Documentation
Key data: 380 mm, 1019 mm
X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12
Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation
Key data: 1740 mm, 760 mm, 660 mm
Mazatrol PC Fusion CNC 640 M Control 30-fold tool changer SK-40 Tool holder according to DIN 69871 Automatic tool length measurement Cooling by the spindle Chip Conveyor, Right Discharge Detachable handwheel Rapid traverses X/Y/Z: 36 m/min CE mark
Key data: 3000 mm, 820 mm, 720 mm
48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining
Key data: 660 mm, 1495 mm
Mazak Integrex 200-lV ST CNC turning-milling center with second spindle CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Spindle speed 35 - 5000 rpm Spindle speed sub spindle 35 - 5000 rpm Milling head speed 15 - 21,500 rpm X-axis travel 580 mm Y-axis travel 160 mm Travel of the Z-axis 1,545 mm Travel of the B-axis 225 ° C-axis indexing 0.0001° (360°) Tool Taper Capto C6 Number of tools in the magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Key data: 1050 mm, 530 mm, 510 mm
Mazak VCN 530C CNC Vertical Machining Center for sale is a very well-maintained Mazak VCN 530C vertical machining center with Lehmann 500 Series 4th/5th axis from 2017. This machine impresses with its high precision, reliability and productivity and is ideally suited for single part and series production. CNC control: Mazatrol Smooth G X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Machine table: 1300 x 550 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyors - Cooling by the spindle 15 bar - Renishaw MP60 - Lehmann 4th/5th axle, type 500-Series, T1-510520. LL-TAP2-M14 with Schunk chuck - Lehmann tailstock, type: RST. LIG-80H If you have any questions about the machine, as well as an appointment for a viewing, please contact ...
Key data: 560 mm, 510 mm, 510 mm
Inv. Num. : 9279 Type: HTC 400 Producer: MAZAK Created: 1998 Parameters: Control System: Mazatrol Work table length: 400 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 5.5 kW Maximum spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Number of stacking positions: 24 pieces
Key data: 730 mm, 450 mm, 470 mm
Mazak CV5-500 CNC 5-Axis Vertical Machining Center CNC control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Maximum 500x320 mm workpiece X-axis travel 730 mm Y-axis travel 450 mm Travel Z-axis 470 mm C-axis (table rotation) 360° B-axis movement ±110 (220) ° Spindle speed: 18,000 rpm Spindle holder HSK A-63 Spindle motor 15/11 kW Magazine capacity 48 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Key data: 730 mm, 850 mm, 560 mm
5-axis Vertical Machining Centre CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10,000 1/min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazine capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.
The machine is in good technical condition, after prior agreement it is possible to test it. Matrix NEXUS 2- control system Pallets 2x YES. Chip conveyor Yes ATC- YES High pressure 70 Bar Spindle 10 125 hours •Total machine start-up 32 348 hours Pallet 630 × 630 mm Number of pallets 2 Max. workpiece size Ø 1050 × 1300 mm Max. pallet load 1500 kg X travel 1050 mm Y travel 900 mm Z travel 980 mm 4th axis Yes (NC rotary table) Spindle taper BT50 / CAT50 Spindle speed 8000 rpm (standard) Optional speed 10,000 rpm Spindle power approx. 37 kW Tool magazine 40–120 positions Control system Mazatrol Matrix Nexus 2 Production type Production series machining Typical applications Cabinets, cast iron, steel, automotive Machine weight approx. 20–22 t Automatic pallet change Yes
The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production
Key data: 1050 mm, 510 mm, 510 mm
Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg
Key data: 630 mm, 1100 mm, 600 mm
Clamping area: Ø700 x 500 mm Rapid traverse X/Y/Z: 60/60/56 m/min Milling spindle Max. spindle speed: 18,000 rpm SK-40 Other equipment Air on the workpiece Cooling by the spindle, 70 bar Renishaw RMP 600 Probe F) Tool tip control 5-axis simultaneous machining Tool radius compensation – 5-axis simultaneous Drilling cycle with torque-dependent chip breaking G00 slope constant Synch. Threading Cylinder interpolation EIA Dynamic Compensation 2 (included 1) KNOLL Coolant System KF200/1250 Paper Belt Filter 70 bar high-pressure pumoe KNOLL Chip Conveyor 640-S-1
