mazak mill used for sale

5 Axis Lid Maho DMU 200 P Built in 2000 The machine is in very good condition. Videos under power available ! Technical data: Travel: X 1800 mm Y 2000 mm Z 1100 mm NC Round Table: Table area: 1700 x 1400mm Permissible load: 5000 kg Number of grooves: 11 Axis (swivel range) : 360 x 0.001 degrees Motor spindle: 8,000 rpm (SK50) Tool holder: SK 50 Tool changer: 60 seats Max tool weight: 20 Kg Max tool length: 450mm Max tool diameter: 110mm

Müro paper milling machine; Condition New; Makita machine; Connection to the milling head for suction.; for milling blocks; 5 pcs. available. Paper mill Müro; condition new; Makita nachine; connector at the milling head for dust suction; used for milling blocks; 5 pic. on stock.

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Lamello Milling Machine Olma Stationary L x W x H: 1.0 x 0.7x 1.5 m Built in 1973 Weight approx. 350 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

DECKEL MAHO DMU 100 T YEAR OF CONSTRUCTION: 2001 - Number of axes: 5 ( simultaneous) milling spindle - Tool holder: SK40 - Spindle drive power: 15 [kW] - Spindle speed: 20 - 12,000 [up] LINEAR ACHSEN - Travel X/Y/Z axes: 1,060 x 710 x 710 [mm] - Rapid speed (X/Y/Z) : 30,000 [mm/min] - Feed speed (X/Y/Z) : 20 - 15,000 [mm/min] SCHWENKACHSE A : SCHWENKKOPF - Travel: 90 [degrees](+/-) - Minimum resolution: 0.001 [degree] SCHWENKACHSE B : NC ROUND TABLE x 800 [mm] - Travel: 360 [degrees](+/-) - Minimum resolution: 0.001 [degree] WERKZEUGWECHSLER - Number of tools in the magazine: 32 ( 2x 16 places) table - Table size: 1500 x 795 [mm] - Loading table max. : 500 [kg]

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Used sand miill Vollrath type VMSM 2/15 A. Two chambers 15 L volume each. Motor 24 kW, weight 1050 kg.

Used cryogenic mill model PCJ-500. Machine for grinding the product cooled with liquid nitrogen, made of 304 stainless steel, 16 mm thick, externally dimensioned: - length: 6844 mm - width: 2132 mm - height: 3588 mm. Focused on grinding the product based on liquid nitrogen, which allows achieving a temperature of -196 ° C. Liquid nitrogen does not come into contact with the product, it is the source of this low temperature. The cryogenic mill requires a nominal power consumption of 40.45 kW, at 380V, 50Hz.

Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Corundum stone mill Manufacturer: Fryma Type: MK-270 R Built: 1981 N°: F815198/9 Pressure working space: 1 bar Pressure double jacket: 10 bar with control cabinet with temp gauge with outlet chute various spare parts LWH: 1100 x 850 x 1700 mm

Tech. Data and more info on request

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indust ...

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

Laboratory bead mill Manufacturer: VMA Getzmann GmbH Type: Dispermat SL-C50 N°: 0819203 Built: 2003 as good as new with ceramic grinding set with control panel additional pump with user manual and documentation LWH: 670 x 700 x 370

Colloid mill Manufacturer: Probst & Class Type: N100E N°: 90028 Power: 5.5 kW Engine manufacturer: Loher with operating instructions various spare parts (piping, taps, etc.) LWH: 1150 x 400 x 800 mm

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Corundum stone mill Manufacturer: Fryma Type: MMR-O N°: 166 with funnel & outlet Power: 12 hp with various grinding discs LWH: 500 x 500 x 1250 mm

Fixed bed milling machine Zayer 2000BF. Table: 2500x700mm. Longitudinal travel: 2000mm. Cross travel: 1000mm. Vertical travel: 1000mm. ISO50. Speeds: 18. (28-1800rpm). Power: 15cv. Weight: 13000Kgs. Equipped with DRO Fagor.

ID2430 Waagner Biro Wet Ball Mill 260 x 550 cm year/Year of construction 1987 52 t Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, ground material: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, rubber Skega armor Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, regrind: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, armouring rubber skega

Correa F3UE universal milling machine. Table: 1400mmx340mm. Longitudinal travel: 1100mm. Cross travel: 320mm. Vertical travel: 500mm. ISO50. Hure head. Speeds: 18. (28-1400)

Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.

Hammer mill Fa. Wery

Complete mill / mill plant with a capacity for the production of 100 tons of flour/24h consists of: Grain cleaning systems, bucket elevators, conveying augers, stainless steel pipe systems, etc. The automated mill has been continuously modernized and expanded. 1 Airtronic roller mill, made by Bühler 1 top-mounted filter, made by Bühler 1 Dust cleaners 1 double screening machine, Fbrikat Bühler 3 MJZF, make Bühler dissolver, total 7 metal silos for grain Conveyor systems and stainless steel pipe systems 1 Compressor systems Laboratory equipment consisting of: 1 glue washer 2 Perten Inframatic 8600 1 case counting device 1 gluten index device 1 Schlagkreuzmühle To the flour store: Storage cells 6x 7.5 tons Storage cells 2x a 25to 1x 15to -------------------- Elevators: 3x A 75to  ...

Parcels of 7 machines 1x CNC 5 axis milling center, brand Okuma, type MU 400 VA, built in 2004, with various accessories and tool holders 1x CNC 5 axis milling center, brand DMG, type DMU 50/60, year of construction, 1996 with various accessories and tool holders 1x CNC 3 axis milling center, brand Okuma, type VR 40II, year of construction, 1995 with various accessories and tool holders 1x CNC 4 axis milling center, brand Okuma, type MC 40VA, built in 1991, with various accessories and tool holders 1x tool adjuster, Make EZSET Type 400 1 x Schumpfgerät, Brand Heimer, Type Power Clamp, Year of construction 2019

Kolloplex pin mill type 630 Z, Drive : 55 KW Weight : 1100 kg; --> Stifscheiben diameter housing and door side : 630 mm;

Three-roller Manufacturer: Joseph Vögele AG Type: PW 3103 Item #: 713345 Year of construction: 1965 LWH: 550 x 850 x 1200

Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

Milling machine +6 mesh Mesh size 0.2/0.6/1.0/2.0/4.0/5.0mm Germany Wall Engine Updrive M1S-632-2 B3 Single-phase AC motor with start-up and operating capacitor, 0.25 kW, 2800 min-1, 230 V 1~, 50 Hz, IP 55, Iso F, S1, 40° C, Design B3 (foot 80 x 100 mm) Hpg28ilv Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

Flush milling machine HolzHer UF 362 Year of construction 1975 L x W x H: 150 x 80 x 160 cm Weight approx. 440 kg The machine is in good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Demo Machine Specifications:  Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  External dimensions of the mill drum - Ø870 x 1120 mm,  Distance between bearings - 1260 mm,  Height of the drum axis - 860 mm,  Operating capacity - 600 dm3,  Weight of the machine - 641 kg,  Installed power - 5.5 kW,  Input voltage/frequency - 400V/50Hz,  Connector - 32A; 400 V  Milling time range - 1s... 99h59min,  Mill installed on a steel frame,  Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification:  Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  Mill drum external dimensions - Ø870 x 1120 mm, � ...

Machine details Stock number 1105-03328 Machine type tool milling machine - Universal Make MAHO Type MH 800 E Year of construction 2000 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock price Technical details x-path 700 mm y-way 550 mm z-path 500 mm Speed 20 - 5000 rpm Tool holder SK 40 Quibola stroke vertical 80 mm Feed 1 - 5000 mm/min Rapid speed 6000 mm/min Table size 900 x 550 mm Total power requirement 16 KVA Weight of the machine ca. 7 t Space requirement approx. 2.4 x 2.85 x 2.1 m Information - with web control CNC 532 - with FIXED ANGLE TABLE WITH TOOL CHANGER - Enclosure Machine under power Ready for demonstration.

CATALOG NUMBER 6056 TECHNICAL DATA - max height of the processed material 250mm - working length of the spindle 260mm - 40mm spindle diameter - worktop length / width 630x360mm - guide - 9.3 kW engine - 2 material clamps - pneumatic - diameter of the extraction connector 2x120mm - air demand 8bar - dimensions length / width / height 1370x980x1620mm - weight 450 kg - unpainted - cutters included, 2 pcs - Italian production - used milling machine, very good condition Net price: PLN 22900 Net price: EUR 5264 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations, the price may change)

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

Two-roll mill granite 300 mm working width 80 x 60 x 120 cm Approx. 300 kg

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

Mixer, hammer mill, crusher, glass crusher, used Manufacturer: EHINGER IMPIANTI Type: MUD 89 Year of construction: 2003 Engine SIEMENS 45 kW 1475 rpm 400/690 V Reduction with V-belt approx. 4,3:1 Total dimensions: approx. 2800 x 1700 x 2000 mm The mill was planned for the simultaneous grinding and separation of materials with different grinders e.B fragile and tough fractions. It was part of a glass recycling plant in which foam glass gravel was produced. We sell the complete plant with belt ovens, cup plants, silos, crushers and mills.

Mikron Milling Machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.