129,230 used machines on RESALE, but how to find them? Machine Search
Ref.nr 00888 Designation of the system Swap bodies Vehicle Swopper 2-axle Manufacturer: Fiege Tec Model Swopper max 200 (2 axles) Year of manufacture 2004 Self-propelled Swopper max. 200 with global viewing cab and the single-lever Masterpilot for all driving, lifting, steering and locking functions ergonomically mounted on the right side of the driver's seat. A powerful diesel engine serves as the drive. The hydrostatic drive allows the speed to be infinitely adjusted forwards and backwards. The max. 200 is equipped with an articulated drive axle at the front and an air-driven single-axle unit at the rear. Front tyres: two pieces 12.00-20 Industrial a 50% - Rear tyres: four pieces 2.50-15 Industiral approx. 50% lighting according to StVZO consisting of 2x three-chamber lights, side spotlights and position lights, reversing lights, rotating beacon Technical details Hour ...
New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
Oven, wood chip stove, biomass stove, boiler used Manufacturer: MAXXTEC Type: IT-A-550-100-V Year of construction 2001 550 kW 350°C 540 l Diameter approx. 1700 mm Dimensions: approx. 3000 x 1700 x 4500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)
Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0
We offer Peri Maximo 270 and 330 elements 455.67m² as follows: All elements are cleaned, checked and partly covered with new, original Peri Finply formlining. All elements sealed with zinc phosphate coating corrosion. New value PL 2025 approx. 255105,00€ Special net price 97327,00€ 16 Element MX 15 FPly 330x240 6 Element MX 15 FPly 330x120 New Plate 3 Element MX 15 FPly 330x90 New Plate 2 Element MX 15 FPly 330x90 3 Element MX 15 FPly 330x60 3 MZ-Elem. MXM 15 FPly 330x60 new plate 3 MZ-Elem. MXM 15 FPly 330x60 1 Element MX 15 FPly 330x45 New Plate 3 Element MX 15 FPly 330x30 New Plate 7 Element MX 15 FPly 330x30 3 I-corner MXI 15 FPly 330x50/20 new plate 1 I-corner MXI 15 FPly 330x60 11 Element MX 15 Fply 270x240 New Plate 16 Element MX 15 Fply 270x240 3 Element MX 15 Fply 270x120 New Plate 8 Element MX 15 Fply 270x120 3 Element MX-2 15 FPly 270x60 ...
Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz
GEBR, FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE.
used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW
Rieber MaxMo Cold Buffet Edition The Rieber MaxMo Kalt Bain Marie is a professional cooling system that has been specially developed for use in gastronomy and catering. This innovative device allows you to present a variety of cold dishes such as salads, desserts, cold cuts, seafood and much more at the optimal temperature and keep them fresh. The Kalt Bain Marie has precise temperature control that allows you to set the desired cooling temperature for each dish individually. Due to the constant cold, the food is stored safely and hygienically, which preserves the quality, taste and appearance of the dishes. The Rieber MaxMo Kalt Bain Marie is characterized by its high-quality workmanship and first-class materials that ensure efficient cooling. The appliance is energy-efficient and environmentally friendly, so you can optimize both the quality of your food and your operating co ...
Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.
cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...
Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.
electronic scale, Fabr.Soehnle, model 9055 , max. 30 kg / partial range 10 g
new
bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 30 - 400 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE m ...
We offer: Pallet rack, new 72 pitches Manufacturer: MAXRAC Specifications: The rack consists of a basic and 5 cultivation fields. There is space for three pallets next to each other, four pallets on top of each other, including floor space. Colours: Stand: RAL 5015 Sky Blue Trusses: RAL 2004 Pure orange Scope of delivery: 7 frames 5,700 x 1,050 mm 36 trusses 2,700 x CE130 mm 72 locking pins 14 Ground Anchors The trusses have a usable length of 2,700 mm. The permissible shelf load is 3,100 kg (with evenly distributed load). 1,033 kg per pallet. It is a plug-in system, which means that it is very easy to install. We offer a comprehensive range of new and used shelves and accessories and are happy to assist you with your planning. Would you like a shelf installation? Please contact us. Other accessories such as: Anti-collision corners, pus ...
All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw
Key data: 1050 mm, 510 mm, 510 mm
Machine Details Stock-No. 1105-04003 Type of machine Machining Center - Vertical Make BARON MAX Type KAWA SEIKI VMC 32 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis EX WORK Technical details x-travel 810 mm y-travel 510 mm Z-Travel 510 mm table surface area 1050 X 550 mm turning speed range - milling 60 - 8000 rpm control FANUC OM power capacity - milling spindle 7.5 kW tool taper BT 40 No. of tools in magazin 20 stations feed range 1 - 10000 mm/min Rapid traverse: 30 m/min total power requirement 25 kW Weight of the machine approx. 500 kg dimensions of the machine approx. 2300x2200x2600 mm Additional information nice machine WITH FANuc OM
Enveloppe feeder Make PGF Model Maxi Feeder Year 2005 Min Size 100 x 110 mm Max Size 450 x 450 mm Table height motorized adjuatable from 40 - 75 mm Details vacuum-blower pump, PGF delivery belt A Available direct
used
Qty. 3 Second-hand winders Mfc.: Maxson Built: 1997 Roll width: max. 1,700 mm, min. 450 mm Maximum roll diameter: 1,650 mm The width of the core is: 70, 76, 120, 152, 300 mm
Mixing volume: 900 liters Year of manufacture: 2023 / New machine / Stock machine CE mark: yes 2 paddle shafts Front outlet with pneumatic flap control pneumatic protective cover with safety shut-off incl. mast loading for 200 litre cutter wagon Infinitely variable mixing speed adjustment Mixing time preset Voltage: 400 V / 50 Hz. / 3 phases Connected load: 11 kW Control Voltage: 24V DC Frequency converter / touch control: Mitsubishi approx. dimensions in mm with load Latitude: 2.130 Length: 2.200 Height: 2,750
6-sided packaging machine from the manufacturer Mac Due, model: Maxi 120/A and integrated shrink tunnel T.150-80 R. suitable for dimensions: 1000 x 1700 x 500 mm. Dimensions complete system: 11245 x 2170 x 2460 mm incl. extensive documentation Viewings possible at any time by arrangement.
Offer 24435 Specifications: - Table surface 1700 x 550 mm - Manual travels X / Y 1300 x 500 mm - Drill Fabr. MAXION , Type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drilling spindle holder MK 2 - Drilling spindle stroke with drilling depth fine adjustment 90 mm - PV 12 pneumatic feed unit - Projection 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm -Mot. Drilling unit stroke - Table clamping x + y - Minimum amounts of lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges
Key data: 750 kN, 40 mm
Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
We offer Peri Maximo 270 elements 227.49m² as follows: All elements are cleaned, checked and partly covered with new, original Peri Finply formlining. All elements sealed with zinc phosphate coating corrosion. New value: 156.833,50€ Special net price 83.368,15€ Pcs. Description 16 Element MX 270 x 240 New Plate 10 Element MX 270 x 120 New Plate 8 Element MX 270 x 90 New Plate 10 Element MX 270 x 60 New Plate 6 Multi-purpose element MXM 270 x 60 8 Element MX 270 x 45 New Plate 10 Element MX 270 x 30 New Plate 6 Inner corner MXI 270 x 50/20 6 Outer Corner MXA 270 x 45 New Plate 5 Wall Thickness Compensation WDA MX 270 x 10, Alu 4 Wall Thickness Compensation WDA MX 270 x 6 4 Wall Thickness Compensation WDA MX 270 x 4 Total: 75.588,15€ Accessories 90 Anker MX 15 , 20-30 20 MAR 85 compensating latches 2 mesh boxes 80 x 120-K, lacquered 30 Stacking ...
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Transfer: in the current condition as seen -Error: L3 power level defective -Manufacturer: AdPoS, UPS system -Type: UPS Maxi-J FH 40 kVA -Dimensions: 825/440/H1270 mm -Weight: 154 kg
Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg
maximum number of results exceeded
please refine your search
