129,384 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 0 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark T ...
bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed build material less than 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400, ...
L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For larger sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXL PRO-Version - Technical specifications: 220V, 7kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-850)xW(100-650)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L2410xW1095xH1515 | weight (net/gross): 200-250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automati ...
L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XTRA (for very large/wide products). - Technical specifications: 220V, 4.0kW | max. speed of the machine in neutral: 15 cycles/minute | max. product dimensions (mm): L1150xW870xH350 (sealing blade length: L1200xW900mm) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions: L2840xW1560xH1310mm | weight (net/gross): 350/400kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging t ...
L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXTRA (for very large/wide products). - Technical specifications: 380V, 5.0kW | max. speed of the machine in neutral: 15 cycles/minute | max. product dimensions (mm): L1750xW960xH280 (sealing blade length: L1850xW1050mm) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions: L3640xW1715xH1510mm | weight (net/gross): 450/550kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging ...
L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For middle sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-L PRO-Version - Technical specifications: 220V, 4kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-500)xW(100-400)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1765xW810xH975 | weight (net/gross): 150-200kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic ma ...
Economical L-Sealer for wrapping large sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.5kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L750xW600xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1800xW855xH1100 | weight (net/gross): 135/185kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...
L-Sealer for shrink wrap packaging, for very large sized product, semi-automatic (manual infeed of product, automatic outfeed) with pneumatic closing mechanism of L-bar sealer. Suitable to be combined with SHRINKtunnel POF-XXL. - Technical specifications: 220V, 2.0kW | compressed air: 5.5bar, 0.1m? | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L900xW600xH300 (can be varied on demand) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions depending on actual packaging size required | weight (net/gross): 210/250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the ...
Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L450xW400xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1560xW760xH1040 | weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...
Dough machine stainless steel version Eberhardt Model: S 160 Kneading machine mobile with brake 2 LED timers Spiral mixer with 2 gears LED temperature indicator for max. 160 kg dough depending on the TA Flour dust hood only DGUV V3 tested by us Connection: 400 V, 8.55 kW, 20.5 A, 32A-CEE plug Used machine overhauled 3 months warranty + spare parts service Option: Service Package Maintenance contract Instruction & Commissioning Visit our large spiral mixer exhibition!
Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of construction: 1960 Table size: 50 x 70 cm With inking unit: 3 ink application rollers Front marks and side marks Weight: 530 KG Tested and printed Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of manufacture: 1960 Table size: 50 x 70 cm With inking unit: 3 ink ink rollers Front lay marks and side lay mark Weight: 530 KG Checked and test printed
Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.
Gas Booster: Pump for compressing gases. Also for decanting and refilling gas cylinders or gas storage tanks. Suitable for e.g. for hydrogen, helium, nitrogen, argon, compressed air, mixed gases and diving gases... Max. pressure 480bar, drive with compressed air 1.5- 8 bar. I = 60:1
bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...
bore capacity in steel (diameter): 20.0 mm bore capacity in cast iron: 25.0 mm throat: 210 mm bore stroke: 100 mm turning speeds: 240 - 3800 U/min table-size: 300 x 425 mm morse taper: MK 3 total power requirement: 0.6 / 1.2 kW weight of the machine ca.: 300 kg range L-W-H: 500 x 700 x 1750 mm Machine from a vocational school () - in checked condition - machine video - https://www.youtube.com/watch?v=WGhTKBNBT2E Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Boring power: 32.0 mm bore capacity in cast iron: 35.0 mm morse taper: MK 3 spindle stroke: 120 mm throat: 260 mm column diameter: 110 mm table:: 515 x 355 mm turning speeds: 80 - 1400 U/min total power requirement: 0.7 / 1.3 kW weight: 175 kg range L-W-H: 750 x 520 x 1820 mm from a training workshop maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103754 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPECIFICATIONS: 3 flywheels Saw blade width: min. 3 mm Cutting width: 640 mm Cutting height: 400 mm Blade projection: 3600 mm Installed power: 2.2 kW Accessories: 01 SV3 Maxi Saw 01Articulated arm 01 Press beam Replacement saw blades
Stock# UG6388 Little used single screw extruder by Farmet (CZ) model FE100 WE Clever Max. Machine can reach output in range from 90-130 kg/h. Power consumption 16 kW. Includes water pump, die cutting knife, some toolings. Local control panel with plc controls. Previously tested on animal food production. Dims: L 195 cm x W 102.5 cm x H 178 cm x weight 600 kg.
Envelope feeder PGF Maxi Feeder; cleaned and tested; minimum. Format 100x105mm, max. 450x500mm; motorized height-adjustable; suitable for various machines. Envelope Feeder PGF Maxi Feeder; cleaned and checked; min.size 100x105mm, max.450x500mm; adjustable hight by motor; used for different machines.
- Model: MAX 80 CNP - Manufacturer : Glaston - Year of manufacture : 2015 - Condition: Used Includes water reservoir tanks and cerium mixing tank with all equipment and several consumable spear parts. Find more here - / Contact us at -
welding current: 10 - 200 A connected load frequency: 230 V weight: 6,5 kg Dimensions (LxWxH): 380 x 120 x 250 mm TIG Welder AC/DC, Pulse Demo unit in aluminum box Includes all accessories See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
REF-2704 LLEAL MAX-MIX MM-500 VACUUM MIXER FOR LIQUID AND VISCOUS PRODUCTS Manufacturer: LLEAL Model: MAX-MIX MM-500 Year: 2000 Machine no.: 14890 Series: 3712 Electrical specifications: 49.8 kW/380 V/104 A/3+N+E/50 Hz Dimensions (in mm): See the drawing in the last picture. MAX-MIX MM-500 mixing, dispersion, emulsion and homogenisation system. The MAX-MIX processor is a multifunctional piece of equipment ideal for manufacturing liquid and viscous products that require dispersion, homogenisation and emulsion stages (in both solid/liquid and liquid/liquid processes) and that also require a complete deaeration, which is possible thanks to the internal vacuum circuit. The process can also include the heating or cooling of the products during their manufacture, the addition of solids and liquids in vacuum conditions, and the recirculation and discharge by positive displac ...
General SKU293X473 LocationBarneveld MakePall Europe Limited TypeStax No.62568CC Year of construction2009 Pressure Working pressure3.5 Bar Main Features MaterialStainless steel Pressure3.5 Bar Surface4 m2 Specified Features - Filterpress Filter presscheck Filter surface0,5-4 m² Number of platens1 Number of frames1 Manual operated closingcheck Manual openingcheck MaterialStainless steel 1.4552 Information Mounted on wheelscheck lab scale chassis Total height1,60 m Weight100 kg Floorspace0,72x0,72 m Extra Specifications- one unused filter SXL PD45408SPFilterpressesPallFilters > FilterpressesBrand > Pall What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for m ...
General SKU293X915 LocationBarneveld MakePall Stax TypeSXPSC10W No.M1056139G Year of construction2013 Specified Features - Filterpress Material finishPolished Pressure Working pressure3 Bar Main Features MaterialStainless steel Pressure3 Bar Surface20 m2 Filterpresses Filter presscheck Filter capsules Filter surface0,25 - 2 m² Manual operated closingcheck Manual openingcheck MaterialStainless steel 1.4306 (304L) FilterFilter capsules Information Mounted on wheelscheck Floor space1,2 x 0,8 m Weight300 kg CEcheck Floorspace1,2 x 0,8 m Total height1,75 m Extra SpecificationsThis item can be used with 1 to 10 filter plates. This allows the filter surface area to be adjusted from 0.25 m² to 20 m². Technical specs Extra informationMax pressure 3 bar Max temp 60 degCFilterpressesPallFilters > FilterpressesBrand > Pall What you can expect from Foeth: -- Machine ...
Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1994 Chuck size: 380 mm Center height: 300 mm Maximum turning length: 4000 mm Bed length: 5250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 7000 mm x 1500 mm x 1500 mm H Our internal ref. 779
Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1997 Chuck size: 370 mm Center height: 300 mm Maximum turning length: 5000 mm Bed length: 6250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 8000 mm x 2000 mm x 1500 mm H Our internal ref. 787
Dimensions (L/W/H): 2200x1350x1150 mm weight: 500 kg total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
laser capacity in Watt: 130 / 150 Peak working area: 1300x900 mm Dimensions (L/W/H): 2200x1350x1150 mm Weight: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
🏗ï¸ More height? More possibilities †with MANTO 3.30 m! Need formwork for extra-tall wall heights ? Then the Hünnebeck MANTO at 3.30 m height is exactly what you need! 💪 The MANTO 3.30 m is part of Hünnebeck’s well-established wall formwork system †robust, efficient, and highly flexible. Thanks to its hot-dip galvanized steel frames , it’s made to withstand the toughest site conditions †durable and reliable all the way. 💡 🚧 Perfect for crane-assisted projects: With this height, you can form large surfaces even faster and more cost-effectively . Whether used horizontally or vertically , the panels can be combined freely †giving you maximum flexibility on site. 🔁 And as always: 📦 Accessories? Of course! Our warehouse is stocked with a wide range of matchi ...
Kneading capacity dough/flour: approx. 80kg/50kg, bowl capacity: 120l, machine dimensions X/Y/Z: approx. 1600mm/700mm/1200mm, weight: approx. 500kg. Including stainless steel bowl. The control system was renewed in the year 2022. Documentation available. An on-site inspection is possible.
pressure: - t stroke: - mm table-size: - mm total power requirement: - kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: - m : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Heidenhain TNC 620 Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed 12,000 min-1 Round and swivel table Tool magazine for 20 Wkz. ISO 30 Chip conveyor LANG Automation EcoCompact 10 Approx. 100 tool holders ISO 30
power capacity: kW feed pressure: 16 bar liter capacity: 500 l total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Air compressor Operating temperature TS min 10 TS max. 50 degrees The technical data is provided by the manufacturer or operator and is thereforenon-binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us: More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 7 , 13
As good as new with 2 years new equipment warranty Service NEW! ONLY 136 operating hours YOC 2023 with dryer, pre-filter and ES4000 Connect controller Technical data: Effective delivery rate 780 l/min Max. operating pressure 13 bar Tank volume 500 l Container-mounted version Engine rated power 7.5 / 10 kW / hp Electrical connection voltage / frequency 400/50 V/Hz Sound pressure level (4 m) 65 dB(A) Air outlet 3/4 inch Length 1940 mm Width 720 mm Height 1470 mm Weight 305 kg Free shipping throughout Austria
Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T
x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...
Inv. Num. : 8916 Type: Maxis 62N Producer: IEMCA Created: 2007 Parameters: Maximum rod length: 3485 mm Rod diameter: 9-62 mm Weight: 770 kg
This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information.
- Spiral mixer Eberhardt - Type Maximat - with 2 stainless steel boilers - With stainless steel spiral - With 2 automatic timers - with 2 speeds
This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine.
-Spiral mixer - Manufacturer: Enerhardt GmbH - Type: Maximat MAK N160 - with 2 speeds - With automatic timer - for max. 160kg dough
This 3-axis MAXMILL HQ-1260 was manufactured in 2017, featuring a spindle speed of 15000 minâ»Â¹ and a machine weight of 7700 kg. It has been powered on for 18,310 hours, with 9,720 hours of program runtime. If you are looking to get high quality milling capabilities consider the MAXMILL HQ-1260 machine we have for sale. Contact us for more information about this machine.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information.
This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info
amount: 1 STK The tool shown in the illustration is a Sandvik Coromant T-Max Q-Cut head for grooving, identified more precisely by part number 570-40R 1513-09-50. Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inlet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU170P778 MakeFiltron (Pall) TypeOmega 3 Micron Maxisette - Open channel LocationBarneveld Specified Features - Miscellaneous filter FilterTangential flow filtration membrane cassette Filter surface27 Sq Ft., Mounted on wheelsMiscellaneous filtersFiltron pallFilters > Miscellaneous filtersBrand > Filtron pall What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Key data: 1800 kN
Engel e-max 440/180 / Electric machine Year of Make: 2009 Injection unit: Screw diameter: 40 mm Injection weight: approx. 199 g Spray pressure: 1950 bar Dosing volume: 220 ccm Clamping unit: Clamping force: 180 t Tiebar spacing: 520x520 mm Size of the clamping plates: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in very good technical condition, worked in clean production Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hardened injection unit - Bimetal Parallel movements Central lubrication Automatic tool height adjustment Kistler Sensor - Tool Pressure Control Original Tool Crane Dimensions: Weight: 7200 kg Length/Width/Height: 5.87x1.42x2.00 m All offered machines are started by our service technicians before they are sold ...
maximum number of results exceeded
please refine your search
