max mueller used for sale

Kitchen scales CASO Slim max. 5 kg 9 pcs.

Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Description: maximum loading capacity 14 kg maximum range 1,100 mm arm weight: 32.6 kg. control box: 13.8 kg. rated voltage 100 V-240 V frequency 50/60 Hz, phase 1 full-load current 16A short circuit rating 300 A with 2 gripper arms SCHUNK and integrated camera system plus all safety functions max speed: 1.1 m/ repeat accuracy +/- 0.1 mm. 6 degrees of freedom 6 rotation axes. with integrated color camera for AI Functions incl. remote control and PC with robot software licence installed Note: the robot can also be adjusted manually. The robot was used with no payload in the Showroom. Aprox. 500 h of joint moving time. More details see PDF (1-12 collaborative_robots_datasheet_en.pdf) Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 2,200 mm, weight approx.: 120 kg

pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x W&H Matador S1A perforating machine for flat- and satchel bags, Bag width : 70 - 380 mm Bag length : 220 - 600 mm Satchel : max. 70 mm Paper roll width: max. 1060 mm Roll diameter : 1000 mm Year : 1970 - with : 4 colour W&H QMS flexo printing unit Speed: max. . 800 Bags/min With : Photocell for pree-printed rolls. With - Bag width - flat. 132mm, 158mm, 189mm, 238mm, 265mm. With - Bag width satchel. 122mm, 151mm, 180mm. Gearwheels . 470mm, 520mm, 540mm, 640mm, 760mm, 860mm. Still in operation: Yes Available: October - 08

R25972/18 GUSCHKY Spiral sleeve winding system Model: Built: Availability: instantly Wrapper: Manufacturer: Guschky Technical data: Area inner diameter 20-100mm Area wall thickness 4.5mm Maximum belt speed 50 m/min Engine power approx. 10 kW Voltage 220V Three-phase current 50 Hz Air pressure 6 bar -------------------- pneum. Saw: Manufacturer: Guschky Built: 1990 Technical data: Area inner diameter 20-100 Area wall thickness 4.5mm Sleeve length 400 - 6100 mm --------------------- unwinder and glue station Manufacturer: Gasser Built: 1986 Technical data: Gluing Diving Process Number of paper webs 8 + 1 separate deck Available: immediately

<br>NEW PIV GEAR IN YEAR 2006 6 HASPELN, MAX. L"NGE: 1400 MM, 70-800 GSM<br><br>Still in operation: No<br>Verf Gbar: immediately

4-color format: Max. 1000 x 2400 mm.<br>KICKER-FEEDER, DOUBLE STANZE, SLOTTER, STAPLER ETC.. <br><br>Still in operation: No<br>Verf Gbar: immediately

<br>AGFA Avantra 30 with short developers in excellent condition. Total size: 1200, 1800, 2400 and 3600 dpi - max. screen: 75.4 x 63.5 cm.<br><br>Verf Gbar: now

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.

R22104/17 AMC Label Punch Model: NC 110 LCD Built: 1998 Availability: instantly Punching surface 750 x 1100 mm Punch size: max. 280 x 280 mm Min. 10 x 10 mm max. punching pressure 10,000 kg Stacking height 0-25 mm Available: immediately

M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

75 kW, max. 7.5 bar, 13.8 m3/min.

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

<br>With near head UNION SPECIAL Maximum sack length: 120 cm<br><br><br><br>Verf Gbar: now

160 kW, max. 7 bar, 28 m3/min.

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

200 kW, max. 10 bar, 32.7 m3/min.

R25716/12 GOEBEL Roller cutter Model: Practica H III Built: 1957 Working width: 1000 mm Rolling diameter: max. 1000 mm Shaft diameter: 70 - 76 mm Round knife Cutting width min.: 15 mm Roll-up diameter: min. 15 mm, max. 400 mm Speed: 300 m/min Available: immediately

Tank standing, Y.O.M.: 1985, D = 900 mm, 1.4 m high, three load cells, max. pressure: 6 bar, weight: approx. 500 kg

200 kW, max. 10 bar, 32,7 m3/min.

110 kW, max. 8 bar, 15,5 m3/min.

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

BOGENSORTIERANLAGE Manufacturer Gremser Type: S102-A2 Manr.: 410663 Built: 1999 Maximum size width: 102 cm Length: 142 cm Minimum size width: 40 cm Length: 50 cm Material grades 60 g / m2 to 120 g/m2, securities Arc Alignment +-0.1 mm Processing Minimum: 30 m / min Maximum: 140 m / min Maximum power 140 cycles / min Maximum stack height feeder: 1550 cm Good sheet display: 1600 cm Poor bow delivery: 1100 cm Maximum lifting weight 1000 kg Supply voltage 500 V AC Machine weight 2000 kg Dimensions: Width: 190 cm Length: 1220 cm Height: 270 cm Inlet height: 1750 mm Note: Sorts sheets of paper with quality defects (holes, stains, scratches and other irregularities, damage ? Total fault diagnosis was renewed in September 2005 Investment costs: 156,000.00 € Mistakes reserved!

X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Safety package 1 Structure of the device with s ...

We can offer the following paper bag machine for Block bottom / SOS bags: Block bottom / SOS bag machines Producer : Windmoeller & Hoelscher Type : Triumph 3 Year app. 1968 Bag width 120 - 260 mm. Tube length 240 - 900 mm. Bottom width 70 - 150 mm. Max. web width 860 mm. Max. mechanical speed 200 m/min. W&H QMS 992 - 4 colour tail end printer 2 unwinds and glue units for 2 ply bags Still in operation: No Available: Now

132 kW, max. 7.5 bar, 22.74 m3/min.

132 kW, max. 7,5 bar, 22,74 m3/min.

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

R26097/16 EDELMANN Continuous Printing Machine Model: COLOR PRINT V72 SL Built: 2008 Paper web width: max. 720 mm Printing width: max. 710 mm Availability: approx. 12/2011 Servo drive Microprocessor control R/R, R/B Flattening: roll diameter max. 127 cm BST web edge and center control Track length control 2 offset printing towers Automatic inking unit washing Railway turning device Hole punching unit Cross cutters UV dryer Plough folding system Available: by arrangement

160 kW, max. 10 bar, 18.78 m3/min.

We can offer: Windmoeller & Hoelscher Type : Triumph 2 Year: 1974 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. Max. mechanical speed 250 m/min. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels With: Bottom patch unit Still in operation: Yes Available: Now

Type: 6B R1, beading for bearings of 20-100 mm diameter. Workpiece height: Max. 50 mm, Sheet thickness: Max. 0.5 mm.

Cat-Nr 09-2070 in a very good condition! Apex 1500 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red currents. Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt:1500 mm Speed of belt:0-11 m/min Air pressure min:>4 bar Air pressure max:8 bar More Information and photos upon request! Manual Instructions available! Subject to prior sale. All prices are valid Ex-Works, excl.VAT. The mentioned price is valid inly for 1 Pressing Station 1500. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table

Built 1985, tank with weighing equipment in special steel, capactiy: 800 l, tank on 3 weighing cells, max. pressure: 6 bar.

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

50.0 kW, max. 13 bar, 7.9 m3/min.

Creo Lotem 400 Manufacturer: Creo Model: Lotem 400 Year: 2005 4-page format Plate min.: 381 x 318 mm Plate max.: 750 x 622 mm F Speed: 15 plates/hour fiber head 24 diodes, 830nm Resolution :up to 3556 dpi ,Platewinding 37800 Bacher Control 2000 Punch Workflow ,Creo Prinergy Evo

W&H Matador 40 Bag width : 70 – 400 mm. Cut-off length : 180 – 780 mm. Roll width : max. 1250 mm. With a 2 colour in-line printing machine.

50,0 kW, max. 13 bar, 7,9 m3/min.

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

We sell a Czwaluk lift truck here. This lifting tipper was designed and built by us. The frame is made entirely of stainless steel has a maximum load of 600kg, a tipping height of 2800mm with a tilting angle of 45., This lifting tipper can be manufactured for you according to your wishes. Whether tipping height or boiler fork , anything possible.

<br>WORKING WIDTH: 3200 MM, MAX. CHARGE: 90 KN/M,<br><br><br>br>

75.0 kW, max. 10 bar, 10.40 m3/min.