matech used for sale

Manufacturer: Infastaub GmbH Model: Infa-mat AM 451 S Year: 2015 Type: bag / pocket filter Filtration area: 45 m2 Air volume: 4020 m3/h Housing resistance: up to +/- 35 mbar Fan power : 5,5 KW Soundproof housing Automatic and mechanical cleaning of the filters after the process by a vibratory drive Dust collection: bucket

Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

ID3043 MAT SCC-20-K year/Year of construction 2006 2.8 t Injection mixing plant, batch size 300-1000 liters Injection mixing plant, batch size 300-1000 liters

Strip cooling system system Cantilever, built in 2004, strip width 2-fold up to 120 mm, 1-fold up to 200 mm, thickness 6 to 12 mm, Throughput 500 to 800 kg/h

Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Magnetic drum MATEC For iron capture Length about 400 mm Drive about 0.37 kW Gearbox engine with tin slide Weight about 150 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Volcanoring MATEC V.1.0 The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached ...

Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

Matchbook noteblock pasting machine / advernote Matchbook Model Advernote Year 1980´s Size of the noteblock 50 x 50 mm Size of the cover 50 x 110 mm Cover process The cover is being fed automatic from the magazine by air, gets the creasing lines, and gets folded Noteblock process The noteblock is being fed automatic from the magazine by air, gets a dot of glue and is inserted into the cover Finished process The cover is folded in the correct sequence and will be delivered onto the delivery tray, upright. Available direct

Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

Matthews Matthews Marking Systems Marking Printer or Marking Printer Type144907.01 Lite Controller MPERIA Control Supplied with ink and thinner The device was used to print bags in a mill CE compliant Very good condition

Description, subject to prior sale. CNC 4-axis horizontal machining center Make: Matsuura Type: H.Plus-300/PC-5 Y.o.m.: 2003 Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling New spindle in 7/2022. Spindle hours 4800 April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, s ...

Description, subject to prior sale. CNC Horizontal 4-axis machining center - Y 560 mm Control: Matsuura Gtech 30i (programmable FANUC/Matsuura) X 500 mm Y 560 mm ! Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling New spindle in January 2021 New spindle in April 2023. Telescopic cover renewed in September 2023 Machine is in very good working condition. It can be inspected working under power. Technical indications, subject to error.

1 MATHIS laboratory HT beaker dyeing machine, type LABOMAT BFA 12, with 1 set of 12 high temperature beakers, maximal dyeing temperature 140º C, dye cycle controller MATHIS type Uniprogrammer

Key data: 400 mm, 3200 mm

THREAD GRINDER, MATRIX – 70 Make: Matrix Model: 70 Center distance: 4000 mm Max thread length: 3200 mm Max diameter of the workpiece: 394 mm Max diameter with the 508 mm grindstone: 150 mm Max diameter of the workpiece in the spindle: 508 mm Other Info: THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS and ACCESSORIES.

Compact edge banding machine Bi-Matic 4.5 Starter Plus for gluing and processing edge material including glue and edge material., Aggregate: 4, Aggregate 1: Caps, Aggregate 2: Round, Aggregate 3: Pulling blade, Aggregate 4: Babble

General SKU316S1049 LocationBarneveld MakeJ-Tec Typeunknown missing type plate Main Features MaterialStainless steel Volume1065 Ltr. Specified Features - Bag dump station MaterialStainless steel Bag dump stations Silodosing system Closedcheck Capacity± 1065 Ltr. Sizesdia. 800x1800 mm Diameter800 mm Cylindrical height1800 mm Conical height1000 mm Conical bottomcheck Flat topcheck With covercheck Inlet720x520 mm Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) Outletdia. 240 mm Information Floorspace1,2x0,8 m Total height3,4 m Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU316S536 LocationBarneveld MakeJ-Tec Typeunknown missing type plate Main Features MaterialStainless steel Volume1065 Ltr. Specified Features - Bag dump station MaterialStainless steel Bag dump stations Silodosing system Closedcheck Capacity± 1065 Ltr. Sizesdia. 800x1800 mm Diameter800 mm Cylindrical height1800 mm Conical height1000 mm Conical bottomcheck Flat topcheck With covercheck Inlet720x520 mm Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) Outletdia. 240 mm Information Floorspace1,2x0,8 m Total height3,4 m Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU207U080 LocationBarneveld Makem-tec mathis technik GmbH TypeTaumelmischanlage No.75300040001 Year of construction2004 Main Features MaterialMild steel Volume800 Ltr. Motor9.2 KW Specified Features - Tumbler mixer MaterialMild steel Tumbler mixercheck Barrel mixercheck Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Outletdia. 260 mm With motor9,2 kW 230/400 Volt Tumbler mixers Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Information Mounted on framecheck Total height3,6 m Weight3260 kg CEcheck Floorspace2,4x2,8 m Extra Specificationswith tank: : max. 190 Ltr., inlet: 450, outlet: 260 mm max. 800 Ltr., inlet: 450, outlet: 260 mmTumbler mixersM-Tec, Mathis TechnikMixers > Tumbler mixersBrand > M-Tec, Mathis Technik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any desti ...

x-travel: 3000 mm y-travel: 800 mm z-travel: 1100 mm Control: total power requirement: 60 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 7,0 X 6,0 X 4,0 m For sale is a Matec 30 HV machine number 569 built in 2003. The machine is expected to be released in August 2024 and can be used under Electricity can be visited. The machine has been serviced every year and is technical in a good condition. Manufacturer: Matec Maschinenbau Type: 30HV Machine number: 569 Year of construction: 11/2003 Control: Bosch Type 3 Osa control x-travel 3,000 mm y-travel 800 mm z-travel 1100 mm Main spindle: Type DMS 112 speed range - main spindle max. 12,000 min/-1 Drive power - main spindle 30 kW Max. Torque 190 Nm Tool holder HSK 63 A Drilling capacity steel approx. 60mm Milling capacity approx. 500 cm³ Thread cutting M30 Feeds: Rapid traverse (X / Y / Z) 30 m/min Feed speed 30,000 mm/m ...

General SKU354U1319 LocationBarneveld MakeWerner Mathis TypeLTE 53801 Year of construction2000 Main Features MaterialStainless steel Max.temp.250 °C Specified Features - Drying oven Drying ovencheck Max. temperatureUp to 250°C Number of compartments:1 CapacitySample size max 33x43 cm Electric heating7.2 kW Electric capacity9 kW With fancheck With infra-redcheck MaterialStainless steel Information Mounted on framecheck With switchgearcheck Total height1,60 m Weight400 kg CEcheck Floorspace1,20 x 0,90 m Extra Specifications- sample tray is missingNew arrivalsDrying ovensWerner Mathis AGNew arrivalsDryers > Drying ovensBrand > Werner Mathis AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

CNC Milling Machine Machining Center Model: 5-axis + buffer station Manufacturer: Matsuura Type: LX-0 Model: High-Speed-High-Precision Year of construction: 2007 Buffer Drive: WorkPal System 3R Automatic with clamp for C-axis. Integrated PLC Control: L-Tech / Fanuc 30i Working Hours: 24276 Travel: 330x300x250mm + Matsuura 4th and 5th rotating axis. B-axis: -110/+10 degrees C-axis: 360 degrees Travel speed: 90,000mm/min Spindle speed: up to 40,000 rpm Tool holder: 30pcs Machine has been tested and serviced. Includes new FSE refrigerated tray, scraper-conveyor (purchased: €13,000) Complete with documentation; schedules etc. Disassembled for transport and stored in our warehouse.

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.

Single acting pneumatic actuator, type it 350 Spring Kit Nr. 4 Function: Federkraftschließend Manufacturer: El-o-matic (today: Emerson) Type: ES0350H1A04A00N0 Serial No.: 4220206001055 Pressure: maximum 8 bar (116 PSI) Max./min. temperature: 80 ° C / - 20 ° C Drives are as good as new, as they are still unused! New price: 563,84

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

x-travel: 600 mm y-travel: 410 mm z-travel: 470 mm work height max.: 620 mm table surface area: 600x380 mm numbers of pallets: 2 turning speeds: 30-7000 U/min spindle diameter: 75 mm Tool changer: 30 Control: Matsuura type: MX 3 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED STAINLESS STEEL VERSA-MATIC E2 DIAPHRAGM PUMP

USED STAINLESS STEEL VERSA-MATIC E4CA1R110-B DIAPHRAGM PUMP

USED STAINLESS STEEL VERSA-MATIC E4CA1R110-B DIAPHRAGM PUMP

Stainless steel VERSA-MATIC ATEX diaphragm pump

Air Operated Double Diaphragm Pump manufactured by VERSA-MATIC