mast used for sale

- to be dismantled by the buyer, Door opening approximately 258xH300cm. - with flexible suction hose, without galvanized extraction ducts. - Saw shaft not working. - Including various accessories. - Tool holder for 6 pieces. Auction-ID: A1-49374-2

inv 6278 - Labeling Machine Manufacturer: P.E. labellers Model: Master S – 12T.825.2S.2E Year: 2002 Serial Number: KB894 Siemens PLC Conveyor chain width: 85 mm Power supply: 400 V / 50 Hz / 5 kW Overall dimensions (W x D x H): 5000 x 2360 x 1940 mm Weight: 2800 kg Control cabinet (W x D x H): 1000 x 600 x 2250 mm (weight 300 kg) Technical documentation: available, details on request Auction-ID: A1-49706-142

Year: 2002 Manufacturer: Renault Type/Function: Hydraulic tipper truck Model: Master Tipper equipment: CIF BRETTA Tipper type: VT 306 I2 Equipment weight: 600 kg Indicated payload: 1,225 kg Year of manufacture of equipment: 02/2002 Year of assembly: 12/2002 Equipment: Electric in-cab tipper control, 3-seater cab Auction-ID: A1-50088-13

Manufacturer: Renault Type/Function: Utility van Model: Master Engine: Diesel dCi 90 Mileage: 346,710 km Curb weight: 1,850 kg Equipment: Rear hitch To be expected: Gearbox to be replaced, gearbox supplied Auction-ID: A1-50088-15

Renault Master Furniture Box Original mileage (with carpass) 2.8 Diesel 5v manual 735kg payload 2000kg towing capacity 3 Seats Light Cargo Radio Rear swing doors Door side furniture box Towbar Auction-ID: A3-46160-5059

Machine: Door production line MASTERWOOD DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: Max. L 2500 mm, Max. W 1300 mm, Max. H 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: CE Auction-ID: A1-50215-27

White Renault Master with closed cargo box and hydraulic tail lift from Dhollandia. The cargo space has wooden side walls and a wooden floor. The tailgate has an aluminum platform. The cab seats three people and is equipped with a manual gearbox, radio and heating/ventilation system. The vehicle is on steel rims. The odometer reading is 201,543 km. The vehicle shows signs of wear, including dirt and wear on the interior, minor damage and discoloration/contamination to the cargo body. The operation of the engine, gearbox and tailgate has not been tested and must be checked by the prospective buyer. Auction-ID: A3-46160-1

Machining Strokes: X-Axis: 3,400 mm | Y-Axis: 600 mm | Z-Axis: 150 mm Tool System: 8-Position Tool Holder Holding parts: Equipped with a vacuum pump Auction-ID: A1-50215-44

The Drester GP24 Le Mans is a fully automated wheel washing machine, designed for high-volume tire workshops, garages and automotive service centers. It uses an environmentally friendly cleaning process based on a mixture of water and DoublePower plastic granulate, sprayed via a mobile rinse tube. This system allows efficient, gentle and uniform cleaning of aluminium rims, sensitive rims and SUV wheels, while preserving the TPMS sensors. The cycle takes place without human intervention: the operator loads the wheel onto the industrial trolley (Rollwagen), positions it in the machine, starts the cycle, and the GP24 automatically manages the entire process. Key points: • 100% automated process • Fast and repeatable cleaning • Dynamic technology for optimised aggregate action • Closed water circuit (300 L) with low consumption • Ergonomic solution for the operator • Compati ...

This gas forklift is equipped with a duplex lifting mast, hydraulic sideshift and forks. Thanks to the side shift, the entire carriage can be hydraulically moved to the left and right, allowing pallets and loads to be positioned more accurately without having to move the forklift every time. Equipped with LPG drive and gas cylinder holder at the rear. The driver's seat features a overhead guard, comfortable seat with armrests and seat belt, rear-view mirror and multi-lever hydraulic operation. The forklift truck stands on industrial tires with clear profile. The mast, lifting chains, hydraulic lines and lifting cylinder are visible in the photos. The forks are included. Machine in used condition with normal to obvious signs of wear, including paint damage, superficial oxidation and wear according to age and use. The driver's seat, on the other hand, looks very neat. A simple, solidly bui ...

Defects: Housing slightly damaged Power: 750W Auction-ID: A1-50225-59

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt with vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-34

CNC mortising milling machine MASTERWOOD OMB1 CN3KF • Year : 2005 • Working dimensions: 5600 × 300 mm • Numerical control: SINCRO on Windows PC • Router head: 4 kW • Vertical bar presser for top routing • Digitally controlled retractable backgauges • Table with motorized belt and side stops• Motorized vertical loader and side unloader• Automatic horizontal press (20–220 mm) • Vertical press (18–160 mm) – working up to 33 mm from the milling pin • Power supply : 400 V / 13.4 A / 50 Hz • Weight : 2000 kg  Auction-ID: A1-50215-36

Machine: MASTERWOOD TEKNOMAT 2800 Cutting Machine Year: 2004 Machining capacity: X 2800 mm, Y 780 mm, Z 770 mm Positions: - Electrospindle milling unit HF 3.3 kW, 18,000 rpm, tilt -7° to +90° (x2) - HF 5.5 kW electrospindle milling unit, 18,000 rpm, horizontal fixed - HF 5.5 kW electrospindle milling unit, 24,000 rpm, vertical, ISO30 taper Equipment: panel support, 3 pneumatic front pressers + 2 stops, separate electrical cabinet Software: Masterwood MW313 with ANUBA programs (hinges, hinges, locks, strikers, special cutters) Axis speeds: U 60 m/min, V 20 m/min, W 20 m/min Safety: infrared barrier, CE protection Suction: Ø200 mm, flow rate 3000 m³/h Consumption: 32 A Dimensions: 5430 x 4798 mm Weight: 3600 kg + 430 kg (electric cabinet) Auction-ID: A1-50215-42

Machine Type: TEK.2004F Serial Number: 99050024 Country of Origin: Italy Power: 10 kW Voltage: 380 V Frequency: 50 Hz Amperage: 19.9 A Maximum distance between the 2 external anuba plugs: 2,700 mm Maximum height with head positioned at 0°: 200 mm Maximum thickness with head positioned at 90°: 120 mm Drilling Engine: 1 HP Screwdriving motor: 1 HP X-axis speed: 40 m/min Y-axis speed: 7 m/min Z-axis speed: 7 m/min Overall dimensions: 3,550 x 2,623 x 2,200 mm Machine weight: 1,600 kg Weight of electrical panel: 145 kg Auction-ID: A1-50215-52

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt-driven, vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-41

KUHN Multi-Master 113 4-Scissor Hydraulic Reversible Plow – New and Unused Specifications: Brand: KUHN Manufacturer: KUHN-HUARD S.A.S. Series: Multi-Master 113 Model according to type plate: MM1133E/41102 Serial Number: KHUA1007V00G00562 Version: mounted hydraulic reversible plough Number of scissors: 4 Number of risters: 8, 4 per direction Working width per shear: 35, 40 or 45 cm Total working width: approx. 1,400, 1,600 or 1,800 mm Working width: mechanically adjustable Distance between plough bodies: approx. 1,020 mm Clear height under frame: approx. 750 mm Main frame: 120 × 120 mm Maximum permitted tractor power: approx. 88 kW / 120 hp Total length: approx. 4,300 mm Total width: approx. 2,000 mm Total height: approx. 1,600 mm Maximum working width: approx. 1,800 mm Weight according to type plate: 800 kg Features: 3-point tightening Hydraulic Rolling ...

JLG Toucan 8E Electric Mast Lift – 8.15m – year of construction 2014 Specifications: Brand: JLG Model/type: Toucan 8E Machine: electric mast lift Year of construction: 2014 Serial Number: A300052832 Reading hours: 508 hours Maximum working height: approx. 8.15 m Maximum platform height: approx. 6.15 m Maximum horizontal reach: approx. 2.39 m Platform capacity: 200 kg Maximum number of people: 2 Platform dimensions: approx. 0.90 x 0.85 m Swivel range: approx. 345° Drive: electric Electrical system: 24 V DC Wheel drive: 2WD Maximum travel speed folded: approx. 5.5 km/h Maximum inclination in transport position: approx. 25% Own weight: 2,110 kg according to type plate Transport length: approx. 2.09 m Transport width: approx. 0.99 m Transport height: approx. 1.99 m Wheelbase: approx. 1.20 m CE marked Features: Electric drive Vertical telescopic mast  ...