We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,243 used machines on RESALE, but how to find them? Machine Search
used
Removed in rotating condition due to re-engine Incl. propellor shaft flange and original oil pit
used
MASSON MARINE GEARBOX
used
USED MASSON MARINE GEARBOX
used
Mass International conveyors 2 pcs + turn. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).
used
Three pieces of belt conveyors from Mass International. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in ...
used
Description Separator that can be used to detach the pieces from the sprues Brand: Mass Model: SM Container diameter: 57 mm Mouth dimensions: 585 x 380 mm Speed variator: mechanical handwheel Timer: yes Nominal power: 0,55 Kw Supply voltage: 400 V
used
Inclined conveyor belt on aluminium profile - Mass International NS-2 (2 pcs.) Year of construction: 2018 Inclined conveyor belt on aluminium profile, with adjustment of height and angle of inclination Length of the inclined strap 130 cm, length of the horizontal strap 57 cm, width of the strap 34.5 cm Drivers from a height of 3.5 cm every 47 cm Height of conveyor belt housings 6.5 cm Price: On request
used
Inclined Conveyor Belt on Aluminum Profile - Mass International Year of construction: 2020 Inclined conveyor belt on aluminium profile, with adjustment of height and angle of inclination Length of the inclined strap 180 cm, length of the horizontal strap 58 cm, width of the strap 34.5 cm Drivers from a height of 3.5 cm every 47 cm Height of conveyor belt housings 6.5 cm Price: On request
used
Inclined conveyor belt on aluminium profile - Mass International NS-SPEC (2 pcs.) Year of construction: 2021 Inclined conveyor belt on aluminium profile, with adjustment of height and angle of inclination Length of the inclined strap 130 cm, length of the horizontal strap 67 cm, width of the strap 44.5 cm Carriers from a height of 3.5 cm every 49 cm Height of conveyor belt housings 6.5 cm Price: On request
used
Flat Conveyor Belt on Aluminum Substructure - Mass International NPS Year of construction: 2020 Flat conveyor belt on aluminium substructure Length of the strap 600 cm, width of the strap 60 cm By regulating the height of the angle of inclination Conveyor belt mobile, on wheels Price: On request
used
capacity 5 kg, stainless steel brand new
new
New machines: Chocolate tank, dissolving agitators, Temperature control machines, chocolate pumps. Various sizes and services, stainless steel, very good quality. We are a sales and service partner for MASSA in German-speaking countries.
used
#21069 gear transmission ratio: 1 / 2,966 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
Gear boxes masson ratios 5:1 4:1
used
used
MASSON MARINE GEARBOX RSD 201 / 3.978:1
used
MAsson gear Box Marine W 8000 C Ratio 1.98:1 power 1410 KW @1000 rpm Building year 2005 low hours
used
Pad printing package: Machine 1: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 2000 Flame treatment plans: Arcotec FTS 101 P Year: 2000 incl. Cable, burner, connections, devices and wall bracket Machine 2: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 1997 Flame treatment plans: Arcotec FTS 051 D Year: 2001 including cables, torches and connections, devices and wall bracket Equipment: Closed system 4-fold: cliché size 200mm x 100mm Pot diameter 90mm 4 ceramic pots 8 squeegee cups 50mm high 5 squeegee cups 20mm high 3 magnetic holding plates Drying belt: In length, including ceramic heating Flame treatment system (new, unused): HILL WF 10-0 Year: 2004 incl. cable, adapter, connections, burner Ink basin open 4-fold, cliché size 150mm x 450mm, ink squeegee 4 x 90mm Ink basin open, cl ...
used
N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1
used
MASSON MARINE GEARBOX NGC / REDUCTION 4.583:1
used
MASSON MARINE GRAR BOX RSD 401 REDUCTION 4,625:1
used
MASSON RSD 401 RATIO 4,625:1
used
Reference number 20115 Brand Gearbox MASSON Model Gearbox 3450 Ratio 4,913:1 Power 650 kW - 1500 rpm Serial number 27140 General condition EXCELLENT Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 0 / SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES Pto NO DIMENSIONS LxWxH (cm) 9080 mm x 8090 mm x 1130 mm Weight (kg) 1350 KG
used
Gearbox due to re-motorization PTO drive shaft is inclusive Reduction 4,987:1
used
MASSON RCD 800 (W8000) 1216 kW /1600 rpm SN 22123 Ratio 3.538:1 1216 kW 1600 RPM Used in excellent condition Available Mechanical Controls Weight (kg) 1800 Dimensions (cm) 125 X 115 X 140
used
Vernier caliper, caliper, caliper -Manufacturer: Massi, caliper, caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185 / H13 mm -Weight: 1.4 kg
used
Length 1360.0 Width 1180.0 Height 1400.0 Weight 750.0
used
Masson NFC - Used - Ratio 4.92:1
used
Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg
used
With 3D printing with GDP, the object is cured immediately using UV light, resulting in a high printing speed. Massivit is known for its large format 3D printers, which are particularly suited to retail marketing, entertainment, event planning and architecture. Applications for which the Massivit 1500 is particularly well suited: 1. Retail Marketing and Decoration: With the Massivit 1500 companies can create individual and elaborate window displays, POS displays and in-store decorations. 2. Event and Exhibition Design: For event and exhibition designers, the Massivit 1500 offers the ability to create personalized and interactive elements that can attract visitors and enhance the event experience. 3. Architecture and Modeling: The Massivit 1500 can be used to create detailed architectural models that can be used for presentations and project visualization. 4. Large Prototypes and Models: ...
used
weight max.: 3,5 t Lifting height: 7000 mm weight: 7070 kg Motor Capacity: 77 kW Third control circuit: allowable maximum weight: 9,2 T Four wheel steering: 0 tire equipment: 400/80-24 Number of working hours: 9250 h motor: Perkins Diesel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Surface reference plates, roughness dimensions MASSI turning TGL 4763 Rz 0.4 μm - Rz 1.6 μm in wooden box Dimensions: 240 x 125 x 40 mm
used
Surface reference plates, roughness measures MASSI turning TGL 4763 Rz 2.5 μm - Rz 10 μm in wooden box Dimensions: 240 x 125 x 40 mm
used
Surface reference plates, roughness dimensions MASSI turning TGL 4763 Rz 3.2 μm - Rz 80 μm in wooden box Dimensions: 345 x 125 x 40 mm
used
Surface reference plates, roughness dimensions MASSI cylindrical grinding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm
used
Surface reference plates, roughness dimensions MASSI cylindrical grinding TGL 4763 Rz 0.63 μm - Rz 2.5 μm in wooden box Dimensions: 240 x 125 x 40 mm
used
Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.1 μm - Rz 0.4 μm in wooden box Dimensions: 240 x 125 x 40 mm
used
Surface reference plates, roughness dimensions MASSI surface grinding TGL 4763 Rz 0.063 μm - Rz 0.16 μm in wooden box Dimensions: 240 x 125 x 40 mm
used
Surface reference plates, roughness dimensions MASSI surface grinding TGL 4763 Rz 0.25 μm - Rz 2.5 μm in wooden box Dimensions: 345 x 125 x 40 mm
used
Surface reference plates, roughness dimensions MASSI planing TGL 4763 Rz 1.0 μm - Rz 10 μm in wooden box Dimensions: 345 x 125 x 40 mm
used
Surface reference plates, roughness measures MASSI turning TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box Dimensions: 240 x 125 x 30 mm
used
Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 1.6 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm
used
Surface reference plates, roughness dimensions MASSI surface grinding TGL 4763 Rz 1.6 μm and Rz 6.3 μm in wooden box Dimensions: 130 x 120 x 30 mm
used
Surface reference plates, roughness dimensions MASSI hobbing TGL 4763 Rz 6.3 μm and Rz 20 μm in wooden box Dimensions: 240 x 120 x 30 mm
used
Surface reference plates, roughness measures MASSI planing TGL 4763 Rz 10 μm - Rz 80 μm in wooden box Dimensions: 345 x 125 x 40 mm
used
Micrometer with plate MASSI 0 - 20 mm DIN863/1 Accuracy: 0.01 mm in wooden box Dimensions: 180 x 105 x 45 mm
used
Flat ruler, workshop ruler MASSI 1500 x 40 x 8 mm TGL 6153-10A im Holzkasten New ! Dimensions: 1560 x 100 x 45 mm
used
Surface reference plates, roughness measures MASSI planing TGL 4763 Rz 6.3 μm - Rz 160 μm im Holzkasten used, tested ! Dimensions: 345 x 125 x 35 mm
used
Surface reference plates, roughness dimensions MASSI end mills TGL 4763 Rz 6.3 μm - Rz 80 μm im Holzkasten used, tested ! Dimensions: 345 x 125 x 35 mm
used
Surface comparison plate set, roughness dimensions MASSI planing, end milling, turning TGL 4763 planing: Rz 6,3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm