mash used for sale

Stainless Steel Mash Tun 1800L. Manufactured: 2015 Manufacturer: Brewing Vessels Ltd. Insulated with 80mm of insulation. Side entry manway. Sight level side window. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Mash Tun 5bbl working capacity, vertical cylindrical stainless steel vessel, with side entry door. Sparge Bridge with CIP spray ball. 2 section lift of lid. 2 section drilled plate floor. Year of Manufacture: 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Cat. No. 11-3247 in very good condition in AISI 304 Measurements: Diameter: 2450 mm Height: 3500 mm Weight: 2950 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

• Description: Milling machine with 3 axis workbench • Power: 3x 400V • Dimensions: 1100 x 1600 x 1100 mm • Weight: 600 kg • Operating since: 21.05.2013 / P 1971 • Accessories: milling and cooling fogger & various accessories

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

10,500 litre RIEGER mash tank with cooling coils Features: Volume 10500 L Material No. V2A Total height 3400 mm Overall length 4350 mm Cylinder length 2300 mm Diameter 2200 mm permissible. Operating overpressure 2 bar Operating temperature 30 °C Description: Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

12,500 litre RIEGER mash tank with cooling coils Volume 12500 L Material No. V2A Total height 3700 mm Total length 3500 mm Cylinder length 2400 mm Diameter 2250 mm permissible. Operating overpressure 2 bar permissible. Operating temperature 30 bar Description Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

Mash diver / full diver RIEGER with overflushing device and sieve cylinder with cooling jacket and control in V2A outside Features: Volume 10,000 L Material No. V2A Total height 6300 mm Cylinder length 2400 mm Foot height 1200 mm Outer diameter 2300 mm Heating/cooling jacket design Description: Topsoil: Clapper bottom with manhole round approx. 400 mm Cylinder: Tasting tap Threaded Socket DN65 Threaded Socket DN80 Threaded socket central DN80 Control in the control cabinet on the side Large outlet with slide Underbody: 4 spherical feet, height-adjustable with washers Tray with threaded nozzle DN80 As standard, the container has: Double jacket surface for cooling or warming The possibility of fully automatic temperature control Automatic control of the mash fermentation process

- In stainless steel - Year of construction: 1992 - Motor power: 4 kW - Connection : NW 120 - In good condition Dimensions: - Length: 1500mm - Width: 1000mm - Height: 500mm

General Description CNC turning center manufactured by MASHSTROY , model CT 161 . Designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a hydraulic chuck, programmable tailstock and fully enclosed machining area for production applications. Technical Details Manufacturer: MASHSTROY Model: CT 161 Machine type: CNC turning center Horizontal CNC lathe Hydraulic chuck 12-station turret Programmable tailstock Full safety enclosure Original CRT-based CNC control Chip conveyor / chip evacuation system Coolant system Original documentation included Condition Used industrial condition. The machine appears complete with hydraulic chuck, 12-station turret, programmable tailstock, chip conveyor, coolant system and original documentation. Operational status, spindle condition and CNC functionality have not b ...