mas tos used for sale

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laboratory Ploughshare Table, Demonstration Machine Volume : 10 ltr. Material : Areas in contact with the product in stainless steel

Manufacturer: Schiele, Type: Vaccumat Master, Year: 2002, Control: Siemens S 7, Spraying heads - total: 2, Lackheizung: yes, Unterdrucküberwachungt: yes, Lackrückführungt: yes, Year :2002

Manufacturer: Fischer Rückle, Type: Cut Master, Year: 2007, Control: Fischer Rückel, Cross cutting guillotine: Qeurschneidanlage und Verbindungsmaschine, Cutting lenght mm: 250-2800, Working hight mm: ca.1,5, Digital readout lineal guide: yes, FREE TEXT: verlleimung über Fadensystem, Year :2007

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Manufacturer: MB Maschinenbau, Type: ROBA-Simplex, Year: 2010, Control: yes, Monting of the machine: Schleiflamelle, Control: yes, Sanding belt hight: 100 mm, Table length: 1800 mm, Slewable sanding head: no, Sanding belt width max mm: 100, Work piece hight min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: yes, Hight adjustment by hand wheel: yes, FREE TEXT: Luftpolsterkissentisch, Year :2010

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

ID3532 FC Maschinenbau-Schlüsselbauer-Schindler year/Baujahr 1995/2010 Fully automatic stone finishing system (edge aging, bush hammering, impregnation) Fully automatic stone finishing system for the artificial processing of concrete block surfaces and edges, as well as for impregnation. The special feature of this system is that, unlike conventional processes, only the edges can be aged. Furthermore, the system also allows bush hammering of the stone surface. Fully automatic brick finishing system (stone edge aging, stick planting, impregnation) Fully automatic stone cutting system for the artificial processing of concrete block surfaces and edges as well as impregnation. The special feature of the system is that, in contrast to conventional processes, only the edges can be aged.  In addition, the system also allows the stone surface to be hammered. More details and price ...

Engine Model: Masa 9001Vb Year of manufacture: 1992 Molds: 15 pieces Pallet size: 1400 x 1100 (900 pieces) Packagers -Rekers 1x Machine mixer Skako 0.75 m³ 1x Machine mixer Swissmade 0.5 m³ 2 conveyor belts (11 m)

Inv. Num. : 3483 Type: HELICHECK Producer: WALTER MASCHINENBAU Created: 2004 Parameters: The machine is in good technical condition and energized Accessories: Hydraulic clamps SK50

KOVOSVIT MAS S80i CNC turning center was built by KOVOSVIT MAS a.s. in the Czech Republic. This extremely powerful machine is used for precision hole drilling, threading and turning of cylindrical, conical and spherical surfaces. The offer also includes a wide range of equipment in the form of components from renowned brands, which guarantee excellent repeatability of the manufactured parts over many years of intensive operation. These include, among others, a new tool measuring probe, a hydraulic tailstock and a HEIDENHAIN intelligent CNC control. All this makes the S80i CNC CNC lathe the perfect choice for both unit and small batch production. The total weight of the machine is 6700 kg. Technical specifications of the KOVOSVIT MAS S80i universal lathe - maximum turning diameter above the bed: 680 mm - maximum turning diameter over the slide: 430 mm - maximum bar diameter: 80 mm  ...

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

Key data: 150 kg, 480 mm, 375 mm

Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg

Manufacturer: CIMA Model: CI Master 1800 Year of Manufacture: 2019 Type of Machine: Extruder Builder Extruder Size: 90mm Pin Extruder (suitable for tire sizes from 17.5R25 to 26.5R25) Configuration: Cold feed extruder with barrel Control System: Allen-Bradley PLC equipped Cooling System: 4x zone temperature-controlled cooler (Hot/Cold) Power Supply: 380V Air Requirement: 8 bar input Expandable Rim Options: 25”, 22.5”, and 20.5” sizes Condition: Brand New Useful for building TBR and OTR tire sizes Find more here - .ucymachines/ Contact us at - sales@ucymachines

Horizontal cartoner 60-ECO – compact, powerful and flexible Lack of space is a common issue in the food industry – with the 60-ECO horizontal cartoner, we offer a compact and powerful solution! The machine has been specially developed to efficiently process a wide variety of folding carton sizes in a minimum of space. With a basic length of only 2,284 mm (expandable depending on the desired conveyor belt length), it achieves an output of up to 60 folding cartons per minute. Technical highlights: Product feed adaptable: The feed belt can be individually adapted if desired. Automatic product clocking: We can design and fully integrate automatic metering of the products. Packaging area: Processing of folding cartons up to 220 mm long (A), 120 mm wide (W) and 400 mm high (H). Proven technology for maximum reliability: Lasbmmxgqsmftm Nonsb Control: Siemens PLC syste ...

M. No.: 91080-41861 Age : around 1994 Speed: first 70 Sec. / Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

axis stroke (X,Y,Z): unbegrenzt, 1000, 60 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 6 St. milling motor: 4,5 kW CNC machining center at a Special PRICE! MASTERWOOD TF 100 2.0 Partnership Edition Furnishing: ----------------------------------------------------- - Drilling head with 16 drills for 5-sided machining - Grooving saw unit - Milling unit with 6-fold tool changer - incl. grooving saw blade, 2 diamond cutters, 1 WPL finishing cutter - Preparation for CLAMEX and door package - 2 foldable roller conveyors - program-controlled central lubrication ----------------------------------------------------- SPECIAL PRICE 44,990.00 euros (plus VAT) ex works ----------------------------------------------------- Freight, installation, instruction within Germany including 8-hour training individually and on site SPECIAL PRICE 3,000.00 euros (plus VAT) Partne ...

overhauled: 2024 Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling... 20bar ISO 40 L x W x H ... 2700x3000x2940mm Machine weight... 5500kg Magazine spaces ... 20 The machine has undergone a complete overhaul. More info on request.

Our new Model 90-HCI cartoning machine – powerful, flexible and efficient The new 90-HCI cartoning machine impresses with its high performance, precise product guidance and maximum efficiency – even for complex packaging tasks. It has been specially developed for applications in which several products or bags are grouped together and then automatically inserted into a folding box. This makes the 90-HCI particularly suitable for packaging lines with high throughput and variable product diversity. The machine achieves a maximum output of up to 90 cycles per minute. The carton sizes that can be processed vary depending on the grouping and arrangement of the products on the feed belt: Box width (A): 40–310 mm Box height (W): 15–100 mm Box depth (H): 80–350 mm The 90-HCI is the ideal solution for demanding packaging processes where efficiency, flexibility and ...

Vertical continuous cartoning machine – fast, efficient and precise Our vertical cartoning machine is specially designed for continuous high-speed applications. It is ideal for the automatic packaging of bulk materials, especially in combination with a multihead weigher system. Thanks to its continuous operation, the machine achieves a maximum output of up to 100 packs per minute – reliable, gentle on the product and efficient. Specifications: Capacity: up to 100 packs/minute Carton size range: Width: 60–180 mm Height: 30–85 mm Depth: 130–260 mm Dosing system: Multihead-Weigher (multihead weigher) The vertical design enables particularly space-saving integration into existing lines, while the continuous carton handling ensures uniform product feeding and very smooth running. This machine is the perfect solution for companies that demand high pac ...

Flow-wrapping machine KLAT 14-IF – gentle packaging for sensitive products The KLAT 14-IF has been specially developed for packaging products that are sensitive to breakage. The adjustable inclination of the machine body of up to 45° ensures that the product falls into the bags particularly gently – ideal for sensitive goods such as biscuits, waffles or snacks. The machine is versatile and suitable for the production of: Stabilo bags Pillow Bags Stand-up bags Specifications: Maximum film width: 600 mm Maximum bag length: 310 mm The KLAT 14-IF combines high flexibility, product-friendly processing and precise sealing technology – an ideal solution for producers who rely on both product protection and attractive packaging formats. We will be happy to advise you on whether the machine is suitable for your products and offer you a tailor-made solution.

Control: Heidenhain TNC 407 serial number: 60/1997 x-travel: 1.000 mm y-travel: 600 mm z-travel: 700 mm : TISCHMAß: 1300 X 600 mm : Werkzeugwechsler: 24- fac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 20000 kg height of stroke: 130 mm Total height: 327 mm weight: 33 kg dimensions: 250 x 280 x 330 mm Hydraulic machine jack Foot height 26mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Was fitted on a Gildemeister Sprint 65

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

turning diameter over bed: 360 mm centre height: 170 mm centre distance: 650 mm turning dia. over face-slide: 196 mm spindle bore: 42 mm inner taper MT: 5 spindle turning speed - stepless: 20-3250 U/min weight of the machine ca.: 1,6 t dimensions of the machine ca.: 200 x 125 x 165 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: HEIDENHAIN MANUAL PLUS M turning diameter over bed: 320 mm centre height: 160 mm centre distance: 800 mm turning dia. over face-slide: 150 mm spindle bore: 50 mm spindle taper: DIN 55027/B6 spindle turning speed - stepless: 0-4000 U/min total power requirement: 7 kW dimensions of the machine ca.: 400x160x190 cm weight of the machine ca.: 2.2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot runner controller - Mold Masters M2XS-24 Year of Make: 2016 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mold Masters M1-24-24 / Like new Year of Make: 2019 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

Manufacturer: P.E. Labellers Model: MASTER M.S. Type: 12T-770/4S-4E Year of Manufacture: 2007 Electrical Specifications: - Voltage: 400 V - Phases: 3 - Current: 11 A - Power: 6 kW - Frequency: 50 Hz Pneumatic Specifications: - Air Consumption: 30 L/min - Air Pressure: 5 bar Weight: 2200 kg CE Certified Y271010885 can manage a bottle height range from 120 to 400 mm - The range of bottle Ø goes from 30 to 120. - For the label length, this machine can apply labels that cover max 180° of the bottle. - The adhesive stations have a size of 200 H. - The machine is predisposed for the mechanical centering via bottom notch. - Max velocity of the machine is 8000 B/H. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Colchester Univ. Lathe Master 2500 Center height 180 mm Center width 600 mm Bore (passage) 40 mm RSF 2-Axis Digital Display Type Z-550 incl. accessories

Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker

Hot runner controller - Mold Masters M1-24-24 Year of Make: 2016 Location: Lodz, Poland Description: 24 hot zones with cabling All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and man ...

Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of construction: 1960 Table size: 50 x 70 cm With inking unit: 3 ink application rollers Front marks and side marks Weight: 530 KG Tested and printed Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of manufacture: 1960 Table size: 50 x 70 cm With inking unit: 3 ink ink rollers Front lay marks and side lay mark Weight: 530 KG Checked and test printed

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.

turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake  ...

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake functi ...

turning length: 1000 mm turning diameter: 360 mm swing diameter over bed slide: 220 mm turning dia. in gap: 502 mm spindle bore: 52,0 mm turning speeds: 70 - 2.000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 3 MK quill travel: 100 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1825 x 750 x 1600 mm Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gear ...

Inv. Num. : 8638 Type: SPU 20 Producer: MAS Created: 1995 Parameters: Control system: Siemens Maximum turning length: 700 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 380 mm

: 0554 mm : 370 mm : 2000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.