127,340 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request
Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw
The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 15 kW - 400 V - 50 Hz - 2.950 rpm - 27,1 A. P(inlet): 1.013 hPa. P(outlet): 300 hPa. PS: 620 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 228 cfm. Sound level: 87 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...
Work spindle, drill spindle, Tool spindle, HSK 40, AD68mm, Mapal, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 40, incl. flinger ring and cover ring, - Length bearing body 129 x D 68mm, 5 roller bearings AD 68 mm, - Incl. Rotex coupling with gear rim drive side for shaft D25 mm, - Overall dimensions: 270 mm x D 68 mm, 5kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we wi ...
Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...
Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...
used
Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.
Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg
MAPPACK Conpax Servo Wrap Packaging Machine Foil Packaging
Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t
Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010
Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007
Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002
HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use
General SKU427W1535 MakeMapro TypeCL 46/1 SP No.50S202 Year of construction2010 Mounted on framecheck Main Features Capacity5.5 m3/Min Motor5.5 KW Specified Features - Blower Blowercheck Capacity5,5m³/min Motor5,5 kW, 400/690 volt, 2900 rpm, (Ex) With air filtercheck With sound absorbercheck InletDia. 180 mm OutletDia. 180 mm MaterialMild steel With jacketcheck General LocationBarneveld Floorspace0,85x0,45 m Total height0,52 m Weight100 kg CEcheck ATEX designedcheckBlowersMaproBlowers > BlowersBrand > Mapro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.
Finishing machine Fine planing machine MAPO Type SPO 180FH planing from above Optimal surface quality Machining speed 50 m/min. Elimination of intermediate sanding Problem-free processing of even damp wood Maximum working width 250 mm Chip thickness maximum 3/10 mm Passage height 1 – 180 mm Tool setting 0° - 60° Motor power 2.2 kW Weight 350 kg
The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...
An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible.
Hot glue book spine glue Book spine milling station for books max H440xB280xD40mm
Inserts, hand reamers, reamer, reaming tool, fitting knife cutting set -Type: SP-AZ93R6 -Dimensions: 22x7x3 mm -Inserts: for reamers -Number: 11 packages available -Price: per piece
Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg
Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 Condition: Used, reconditioned Specification: Press 600 x 630 mm, second-hand - clamping force: 300 tonnes (3,000 kN) - closing: from bottom to top - Heating platens: 2 electric platens, with new heating rods - Heating platen dimensions approx.: 600 x 630 mm - Distance between the heating platens approx.: 420 mm - New electric valves - AC machine output oil pump: 5.5 kW - New control cabinet with Siemens 7’ touch panel - PLC control system make Siemens S7-1200 - New cabling - Frequency inverter made by Schneider - Light barriers in the front area, Overhauled in accordance with CE standard safety regulations Operating instructions and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS ...
clamping force: 4.000 kN injection volume: 4.000 cm³ screw diameter: -- mm platen size: 800 x 710 mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - heating platen size: 800 x 710 mm - ejection device: 2-layer Injection unit: - Injection volume max.: 4,000 cm³ - Original screw 1005.10.008 B/c The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
S. No.: J21032541-1/354 Equipment / Additional information: Load: 2500 kg
x-travel: 800 mm y-travel: 500 mm z-travel: 500 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the ...
Desk décor maple approx. 120x60 cm, heavily worn, swivel chair
Maprox VLK 15 / W20 mini splitting device, intended for precise angular distribution of parts. Used mainly in: Micromechanics Watchmaking precision machining Small parts manufacturing Allows for fast and accurate indexing through a direct division system. Auction-ID: A1-47291-59
Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg
Control card, hot melt adhesive, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0001 -Type: 4008390001 -Number: 1x control cards available -Price: per piece -Dimensions: 100/40/H170 mm -Weight: 0.34 kg
Repair and Exchange service Reparatur und Austausch Service Item: I/O Card DE65UB004251 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
For Sale: Multivac T700 Automatic Traysealer – Excellent Condition, We are offering a pre‑owned Multivac T700 Traysealer, ideal for food producers, packaging businesses, and industrial applications. This reliable and versatile machine is in very good working condition and ready to go straight into production., Key Features & Highlights:, - Automatic tray sealing machine designed for high‑volume industrial packaging., - Suitable for sealing trays made of plastic, aluminum, cardboard, and foam with a wide range of sealing films., - Robust stainless steel construction for durability and hygiene., - User‑friendly operation with quick tool change‑over., - Can be used for standard tray sealing and MAP, Specifications (approximate):, - Model: Multivac T700 Automatic Traysealer, - Condition: Used, in very good state, - Cycle speed: Up to ~20 cycles per minute (sealing only), WITH MAP d ...
FOR SALE: Reepack ReeFlex 250 – Automatic Tray Sealer (2011), Description:, For sale: a Reepack ReeFlex 250 automatic tray sealer, a professional packaging machine designed for industrial food packaging lines. This machine is known for its high performance, flexibility, and robust construction, ensuring reliable and efficient production., The machine is in good condition., Tool sizes can be found in the photo album, they measure;, - 325 x 265, - 227 x 178, Key Features:, • Fully automatic in-line tray sealer, suitable for sealing trays with top film for retail and retail-ready packaging, • Twin chamber / dual mould system for increased output capacity, • Robust stainless steel (AISI 304) construction, suitable for hygienic food production environments, • PLC control with touchscreen interface for easy operation and programmable recipes, • Suitable for multiple packaging solut ...
Alfa Laval Mapx 309 2 pieces available. Price 1 pcs Motor 11 kW Hydraulic capacity 9.800l /h Tools Used
Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at
Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at
Used Alfa Laval self-cleaning disc centrifuge, type MAPX 309BGT-14-60. Centrifuge after technical inspection. Replaced bearings and seals. Capacity approx. 10m3 /h
Used disc centrifuge from WSK Kraków type MAPX 309. Centrifuge under renovation. The centrifuge worked on cooking oils. Capacity 10,000 l/h.
MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg
We have more than one separators in our stock. Pls feel free to contact with us and check our stocks any time you want.
Multivac M860F MC Thermoforming Packaging Machine High-performance thermoforming packaging machine designed for vacuum and modified atmosphere packaging (MAP) applications. The Multivac M860F MC offers reliable operation, flexible format handling, and hygienic stainless steel construction, making it suitable for industrial food packaging environments. General Information - Manufacturer: Multivac - Model: M860F MC - Year of Manufacture: 1995 - Operating Hours: approx. 30,000 - Ownership: Single owner - Origin: Switzerland - Current Location: Sharjah, UAE - Production Status: Ready for immediate installation and production - Condition: Excellent used condition - Vacuum Pump: Not included in the scope of supply Machine Dimensions - Length: 670 cm - Width: 96 cm - Height: 190 cm Film Specifications - Film Width: 420 mm Packaging Formats Forming Dimensions - 250 ...
A tray packaging machine Monidin is available. Tray dimensions X/Y: 340mm/280mm, film width: 270mm, performance: 4-5 cycles/min, vacuum pump: Busch R5, pump capacity: 300m³/h, material: stainless steel, packaging type: MAP (Modified Atmosphere Packaging). Machine dimensions X/Y/Z: approx. 3300mm/900mm/2000mm, control: Siemens PLC. Tooling equipment: 2-impression MAP tool for 1825 trays (250mm/180mm) and 1-impression MAP tool for 2427 trays (240mm/270mm). Documentation available. An on-site inspection is possible.
The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...
Extendable to 16m workspace Transport length 8m License plate (Netherlands) • WL-RJ-06 ✅ Country of registration • Netherlands (RDW) ⸻ IDENTIFICATION Vehicle identification number (VIN/chassis number) • XLH93350003701200 (read from the technical map – sufficiently clear) Brand • Haverkamp (D.1 Brand: HAVERKAMP) Type / Trade name • H3 (as shown on the map) ⸻ DATES Date of first admission • 23-02-2004 Date of first registration in the Netherlands • 23-02-2004 Date of registration (latest) • 16-12-2021 ⸻ ⚙️ TECHNICAL DATA (RDW card) Vehicle category • O2 / Trailer (deducible from masses and layout) Mass empty • ≈ 970 kg Maximum permissible mass • 3,500 kg ✅ Number of axles • 2 (tandem axle) Brakes • Inhibited Towbar / coupling • Overrun brake available (visible in photos) ⸻ DOCUMENTS (in photos) • ✅ ...
Remaining stocks from Siemens S5 product row 250 E/A maps p. 5 15 analogous maps 25 versch CPU 25 stream care and more singles or parcel price
1 € 
