map used for sale

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

General SKU338Y833 MakeMAP Italy Serial888 Main Features MaterialStainless steel Volume1000 Ltr. Motor25 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity1000 l Trough sizesDia. 1000 x 1430 mm InletDia. 215/320 mm Inspection hatch2x (465x435 mm) Outlet190x190 mm Glands air purgedcheck Motor18,5 kW (380 V, 1470 rpm) With variable speed drivecheck Speed mixing shaft85 rpm Motor2x 3,4 kW (380 V, 2830 rpm) Speed lumpbreaker2830 rpm MaterialStainless steel 1.4301 (304) General Year of construction1997 LocationBarneveld With switchgearcheck Sizes switchgear0,60 x 0,40 x 1,88 m Floorspace3,20 x 1,50 m Total height1,40 m Weight1200 kgGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersPowder turbo mixersFeed additivesOther pharmaceuticsFood additivesSugarAnimal feedOt ...

General SKU338Y834 MakeMAP Italy Serial887 TypeWBHX-4000 / OHK Main Features MaterialStainless steel Volume4000 Ltr. Motor63 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity4.000 l Trough sizesDia. 1500x2450 mm Inletdia. 215/320 mm Inspection hatch2x (755 x 625 mm ) Outlet200 x 200 mm Glands air purgedcheck Motor55 kW,(400 V, 1470 rpm) With variable speed drivecheck Speed mixing shaft8,5-57 rpm With lump breaker2x Motor2x (4,0 kW (380 V, 2865 rpm)) MaterialStainless steel 1.4301 (304) General Year of construction1997 Mounted on framecheck LocationBarneveld With switchgearcheck Sizes switchgear0,80 x 0,40 x 1,90 m Floorspace4,40 x 1,90 m Total height2,40 m Weight3500 kgGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersPowder turbo mixersFeed additivesOther ...

Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 15 kW - 400 V - 50 Hz - 2.950 rpm - 27,1 A. P(inlet): 1.013 hPa. P(outlet): 300 hPa. PS: 620 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 228 cfm. Sound level: 87 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Work spindle, drill spindle, Tool spindle, HSK 40, AD68mm, Mapal, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 40, incl. flinger ring and cover ring, - Length bearing body 129 x D 68mm, 5 roller bearings AD 68 mm, - Incl. Rotex coupling with gear rim drive side for shaft D25 mm, - Overall dimensions: 270 mm x D 68 mm, 5kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we wi ...

Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...

Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...

Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.

Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg

MAPPACK Conpax Servo Wrap Packaging Machine Foil Packaging

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use

General SKU427W1535 MakeMapro LocationBarneveld CEcheck TypeCL 46/1 SP Main Features Capacity5.5 m3/Min Motor5.5 KW Specified Features - Blower Blowercheck Capacity5,5m³/min Motor5,5 kW, 400/690 volt, 2900 rpm, (Ex) With air filtercheck With sound absorbercheck InletDia. 180 mm OutletDia. 180 mm MaterialMild steel General No.50S202 Year of construction2010 Mounted on framecheck Floorspace0,85x0,45 m Total height0,52 m Weight100 kg ATEX designedcheckBlowersGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMi ...

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

Finishing machine Fine planing machine MAPO Type SPO 180FH planing from above Optimal surface quality Machining speed 50 m/min. Elimination of intermediate sanding Problem-free processing of even damp wood Maximum working width 250 mm Chip thickness maximum 3/10 mm Passage height 1 – 180 mm Tool setting 0° - 60° Motor power 2.2 kW Weight 350 kg

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible.

clamping force: 300 kN injection volume: 180 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine for rubber - second-hand Clamping unit: - Clamping unit: vertical - Clamping force: 300 kN - Platen size: 300 x 300 mm Injection unit: - Maximum injection volume: 180 cm³ - Mains supply: 3x 400 V, 50 Hz - Power rating: 11 kW - Control system: MAPLAN The machine is still in production and can be viewed in operation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot glue book spine glue Book spine milling station for books max H440xB280xD40mm

Inserts, hand reamers, reamer, reaming tool, fitting knife cutting set -Type: SP-AZ93R6 -Dimensions: 22x7x3 mm -Inserts: for reamers -Number: 11 packages available -Price: per piece

Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg

Output of 6,000 x 0.75 l

S. No.: J21032541-1/354 Equipment / Additional information: Load: 2500 kg

x-travel: 800 mm y-travel: 500 mm z-travel: 500 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. 170 tool holders, some with tools

clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the  ...

Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 Condition: Used, reconditioned Specification: Press 600 x 630 mm, second-hand - clamping force: 300 tonnes (3,000 kN) - closing: from bottom to top - Heating platens: 2 electric platens, with new heating rods - Heating platen dimensions approx.: 600 x 630 mm - Distance between the heating platens approx.: 420 mm - New electric valves - AC machine output oil pump: 5.5 kW - New control cabinet with Siemens 7’ touch panel - PLC control system make Siemens S7-1200 - New cabling - Frequency inverter made by Schneider - Light barriers in the front area, Overhauled in accordance with CE standard safety regulations Operating instructions and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS ...

Press force max.:: 10.000 kN heating plates:: 1200 x 1200 mm electrically heated:: °C piston stroke:: ca. 700 mm no. of stages:: 1 Condition: Second-hand, reconditioned Specification: Vulcanising press 1200 x 1200 mm, steel plate construction, second-hand, reconditioned - Clamping force approx.: 1,000 t - Clamping action: bottom-up - Heating plates: 2 electric plates - Heating plate power approx.: 2 x 25 kW - Heating plate dimensions: 1,200 x 1,200 mm - Distance between the heating plates, variant 1: approx. 1,100 mm - Distance between the heating plates, variant 2: approx. 1,500 mm - Piston stroke approx.: 700 mm - Hydraulic power unit with new solenoid valves - AC motor for pump approx.: 30 kW to be checked during overhaul - New control cabinet with 7 Siemens touch panel - Siemens S7-1200 PLC system - Frequency converter for ...

Maschine zum Herstellen von Mappen, Mailings; Hüllen; Machine for producing folders, mailings, and sleeves; Mappen-Falt Klebemaschine / Folder Gluer FIDIA DORA 76 Baujahr / Year 2000 Flachstapelanleger / Flat Pile Feeder Format min. 150 x 240mm - max. 760 x 1000mm Heissleim Schmelzgerät / Hot-melt adhesive melter ROBATECH Concept 8

Kverneland NG-H 101 power harrow with hydraulic lift Specifications: Brand: Kverneland Model: NG-H 101 Type: MAPOHxx Product Type: Power Harrow / Tillage Machine Year of construction: 2012 Machine ID: MAPOHxx102706 Own weight: 1.660 kg PTO speed: 1,000 rpm Features: Power harrow with vertical rotors PTO drive PTO shaft Central drive/gearbox Hydraulic lifting structure Hydraulic cylinders Hydraulic connections Three-point suspension Rear roller / packer roller Height-adjustable rear roller Side plates Equalization facility Multiple rotors with harrow teeth Protective caps Various safety and warning markings Particularities: The transmission table on the machine shows different gear combinations for adjusting the rotor speed. CAUTION: drive box is leaking oil. This should be taken into account during commissioning/repair. Used agricultural machine with ...

Professional tray packaging machine ORVED VGP-60 COMBI SKIN. Condition according to inventory: Refurbished. Brand: ORVED. Model: VGP-60 COMBI SKIN. Internal reference: RS03199_AFR. Code indicated in inventory: 0126CK-B5. Serial number / identification indicated in inventory: ITMSVGPSK00058. Configuration indicated in inventory with B5 mould. Professional equipment for packaging food in trays using Skin technology, vacuum, modified atmosphere (MAP) and heat sealing. Vacuum pump with a nominal capacity of 60 m³/h. Power supply: 400 V / 50-60 Hz / three-phase. Maximum reference electrical power: 2.9 kW. Professional stainless steel construction. Reference B5 tray dimensions for this generation: approx. 229 x 143 x 28 mm.Maximum overall tray dimensions supported by the machine: approx. 325 x 260 x 120 mm.Interchangeable mould system for different tray formats. Skin system for adhering the f ...

Professional tray packaging machine ORVED VGP-60 COMBI SKIN. Condition according to inventory: Refurbished. Brand: ORVED. Model: VGP-60 COMBI SKIN. Internal reference: RS03199_AFR. Code indicated in inventory: 0126CK-B5. Serial number / identification indicated in inventory: ITMSVGPSK00058. Configuration indicated in inventory with B5 mould. Professional equipment for packaging food in trays using Skin technology, vacuum, modified atmosphere (MAP) and heat sealing. Vacuum pump with a nominal capacity of 60 m³/h. Power supply: 400 V / 50-60 Hz / three-phase. Maximum reference electrical power: 2.9 kW. Professional stainless steel construction. Reference B5 tray dimensions for this generation: approx. 229 x 143 x 28 mm.Maximum overall tray dimensions supported by the machine: approx. 325 x 260 x 120 mm.Interchangeable mould system for different tray formats. Skin system for adhering the f ...

COMPLETE SYSTEM CERAMILL MOTION 2 + COOLSTREAM +MAP 400+ COMPUTER no dongle software Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Co ...

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Control card, hot melt adhesive, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0001 -Type: 4008390001 -Number: 1x control cards available -Price: per piece -Dimensions: 100/40/H170 mm -Weight: 0.34 kg

Repair and Exchange service Reparatur und Austausch Service Item: I/O Card DE65UB004251 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Mostly new Auction-ID: A7-51245-88

FOR SALE: Reepack ReeFlex 250 – Automatic Tray Sealer (2011), Description:, For sale: a Reepack ReeFlex 250 automatic tray sealer, a professional packaging machine designed for industrial food packaging lines. This machine is known for its high performance, flexibility, and robust construction, ensuring reliable and efficient production., The machine is in good condition., Tool sizes can be found in the photo album, they measure;, - 325 x 265, - 227 x 178, Key Features:, • Fully automatic in-line tray sealer, suitable for sealing trays with top film for retail and retail-ready packaging, • Twin chamber / dual mould system for increased output capacity, • Robust stainless steel (AISI 304) construction, suitable for hygienic food production environments, • PLC control with touchscreen interface for easy operation and programmable recipes, • Suitable for multiple packaging solut ...

For Sale: Multivac T700 Automatic Traysealer – Excellent Condition, We are offering a pre‑owned Multivac T700 Traysealer, ideal for food producers, packaging businesses, and industrial applications. This reliable and versatile machine is in very good working condition and ready to go straight into production., Key Features & Highlights:, - Automatic tray sealing machine designed for high‑volume industrial packaging., - Suitable for sealing trays made of plastic, aluminum, cardboard, and foam with a wide range of sealing films., - Robust stainless steel construction for durability and hygiene., - User‑friendly operation with quick tool change‑over., - Can be used for standard tray sealing and MAP, Specifications (approximate):, - Model: Multivac T700 Automatic Traysealer, - Condition: Used, in very good state, - Cycle speed: Up to ~20 cycles per minute (sealing only), WITH MAP d ...

Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Used Alfa Laval self-cleaning disc centrifuge, type MAPX 309BGT-14-60. Centrifuge after technical inspection. Replaced bearings and seals. Capacity approx. 10m3 /h

Used disc centrifuge from WSK Kraków type MAPX 309. Centrifuge under renovation. The centrifuge worked on cooking oils. Capacity 10,000 l/h.

MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg

We have more than one separators in our stock. Pls feel free to contact with us and check our stocks any time you want.