map used for sale

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 15 kW - 400 V - 50 Hz - 2.950 rpm - 27,1 A. P(inlet): 1.013 hPa. P(outlet): 300 hPa. PS: 620 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 228 cfm. Sound level: 87 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.

Hot glue book spine glue Book spine milling station for books max H440xB280xD40mm

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg

Work spindle, drill spindle, Tool spindle, HSK 40, AD68mm, Mapal, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 40, incl. flinger ring and cover ring, - Length bearing body 129 x D 68mm, 5 roller bearings AD 68 mm, - Incl. Rotex coupling with gear rim drive side for shaft D25 mm, - Overall dimensions: 270 mm x D 68 mm, 5kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we wi ...

Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...

Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...

MAPPACK Conpax Servo Wrap Packaging Machine Foil Packaging

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg

Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 Condition: Used, reconditioned Specification: Press 600 x 630 mm, second-hand - clamping force: 300 tonnes (3,000 kN) - closing: from bottom to top - Heating platens: 2 electric platens, with new heating rods - Heating platen dimensions approx.: 600 x 630 mm - Distance between the heating platens approx.: 420 mm - New electric valves - AC machine output oil pump: 5.5 kW - New control cabinet with Siemens 7’ touch panel - PLC control system make Siemens S7-1200 - New cabling - Frequency inverter made by Schneider - Light barriers in the front area, Overhauled in accordance with CE standard safety regulations Operating instructions and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS ...

Inserts, hand reamers, reamer, reaming tool, fitting knife cutting set -Type: SP-AZ93R6 -Dimensions: 22x7x3 mm -Inserts: for reamers -Number: 11 packages available -Price: per piece

Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg

Alfa Laval Mapx 309 2 pieces available. Price 1 pcs Motor 11 kW Hydraulic capacity 9.800l /h Tools Used

Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Output of 6,000 x 0.75 l

Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

clamping force: 4.000 kN injection volume: 4.000 cm³ screw diameter: -- mm platen size: 800 x 710 mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - heating platen size: 800 x 710 mm - ejection device: 2-layer Injection unit: - Injection volume max.: 4,000 cm³ - Original screw 1005.10.008 B/c The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw

S. No.: J21032541-1/354 Equipment / Additional information: Load: 2500 kg

Multivac T700, The dimensions of the trays are 187x137 ( approx.) and 145x125 (approx.).

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

We have more than one separators in our stock. Pls feel free to contact with us and check our stocks any time you want.

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use

x-travel: 800 mm y-travel: 500 mm z-travel: 500 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU427W1535 LocationBarneveld MakeMapro TypeCL 46/1 SP No.50S202 Year of construction2010 Main Features Capacity5.5 m3/Min Motor5.5 KW Specified Features - Blower Blowercheck Capacity5,5m³/min Motor5,5 kW, 400/690 volt, 2900 rpm, (Ex) With air filtercheck With sound absorbercheck InletDia. 180 mm OutletDia. 180 mm MaterialMild steel Information Mounted on framecheck Total height0,52 m Weight100 kg CEcheck Floorspace0,85x0,45 m ATEX compatiblecheckBlowersMaproBlowers > BlowersBrand > Mapro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

FOR SALE: Reepack ReeFlex 250 – Automatic Tray Sealer (2011), Description:, For sale: a Reepack ReeFlex 250 automatic tray sealer, a professional packaging machine designed for industrial food packaging lines. This machine is known for its high performance, flexibility, and robust construction, ensuring reliable and efficient production., The machine is in good condition., Key Features:, • Fully automatic in-line tray sealer, suitable for sealing trays with top film for retail and retail-ready packaging, • Twin chamber / dual mould system for increased output capacity, • Robust stainless steel (AISI 304) construction, suitable for hygienic food production environments, • PLC control with touchscreen interface for easy operation and programmable recipes, • Suitable for multiple packaging solutions, including vacuum and Modified Atmosphere Packaging (MAP), depending on configur ...

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

Used Alfa Laval self-cleaning disc centrifuge, type MAPX 309BGT-14-60. Centrifuge after technical inspection. Replaced bearings and seals. Capacity approx. 10m3 /h

Finishing machine Fine planing machine MAPO Type SPO 180FH planing from above Optimal surface quality Machining speed 50 m/min. Elimination of intermediate sanding Problem-free processing of even damp wood Maximum working width 250 mm Chip thickness maximum 3/10 mm Passage height 1 – 180 mm Tool setting 0° - 60° Motor power 2.2 kW Weight 350 kg

Mixed lot of MAPAL WWS tooling system. Includes 1x indexable cutting head and 1x Ø16 MAPAL tool (30320052), along with screws and documentation. Auction-ID: A7-46756-209

2x MAPAL WWS indexable cutting tools in original boxes. Auction-ID: A7-46756-208

Repair and Exchange service Reparatur und Austausch Service Item: I/O Card DE65UB004251 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Control card, hot melt adhesive, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0001 -Type: 4008390001 -Number: 1x control cards available -Price: per piece -Dimensions: 100/40/H170 mm -Weight: 0.34 kg

Different types, sizes Auction-ID: A7-46802-44

Set includes 6 precision boring / reaming tools Manufacturer: MAPAL. Includes modular storage rack system

Including Ecocut/ including pallet box (800x1200mm) with 2 collars Auction-ID: A1-46698-81

Including Weldon/ Shrink-Shrinkfit/ extensions/ reductions and so on/ total 36 pieces/ including tool trolley with dimensions 510x1080x900mm Auction-ID: A1-46698-161

Set includes 6 precision boring / reaming tools Manufacturer: MAPAL. Includes modular storage rack system Auction-ID: A7-46756-244

Office furniture décor maple desk approx. 160x80 cm, sliding door cabinet approx. 80 cm x2 OH, cross roller shutter cabinet approx. 120 cm x3 OH, swivel chair, purchased 2012

Office furniture décor maple 2 desks approx. 160x80 cm, 3 sideboards each approx. 120x85 cm, 1 sliding door cabinet approx. 120x115h cm, swivel chair, purchased in 2012

Office furniture décor maple 2 desks each approx. 160x80 cm, 3 sideboards, each approx. 120x85 cm, 2 swivel chairs, purchased in 2021

The NavVis M6 is an all-in-one system that captures immersive 360-degree images, photorealistic point clouds, Bluetooth beacons, Wi-Fi signals, and sensors Auction-ID: A1-47049-73

By Garant /Ham / Mapal Auction-ID: A7-47109-6

90 degrees and 45 degrees, dimensions 12x12mm L=30mm, can be fixed with Allen screw M6. Auction-ID: A7-47109-40