manual lathe used for sale

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-49514-297

With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-49495-335

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-49495-344

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-49514-67

Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-351

Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-344

Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-350

With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-49514-168

With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-49495-384

With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-49514-58

Batch of various manual high-pressure valves/valves with pressure gauges incl box Auction-ID: A1-48529-196

Batch used various manual high-pressure valves / valves (Rotarex / Tescom / Veriflo / GTC) incl crate Auction-ID: A1-48529-197

Lot of APTECH manual high-pressure valves/valves (10x AP1001SM & 2x AP1206SM) Auction-ID: A1-48529-195

Batch of used APTECH manual vacuum valves (11x AP1001SM & 1x AP1206SM) Auction-ID: A1-48529-194

Technical details Type: Manual plate rolling machine Configuration: - Three-roll slip roller - Adjustable top roll - Manual hand crank drive - External spur gear transmission - Manual roll adjustment screws Application: - Rolling sheet metal into cylinders - Cone forming - Mild steel fabrication - Stainless steel fabrication - Aluminium sheet rolling - General sheet metal work Construction: - Heavy-duty welded steel frame - Manual geared operation - Three hardened steel rolls Working width: Approx. 1200 mm Roll diameter: Approx. 70–90 mm Dimensions: - Length: Approx. 1500 mm - Width: Approx. 600 mm - Height: Approx. 1200 mm Weight: Approx. 250 kg Condition: Used Observed condition: - Machine appears complete - All three rolls installed - Gear transmission intact - Hand crank fitted - Roll adjustment screws present - Surface corrosion and paint wear vis ...

Conventional surface grinding machine with magnetic chuck/table, coolant system and protective side guards. Used industrial machine; brand/model not clearly visible in the photos. Auction-ID: A1-49190-48

Manual Lever Shear / Cutting Machine This item is delivered loaded on truck, Loading costs are specified as additional costs. Auction-ID: A1-49190-27

Conventional manual surface grinding machine with vertical column, magnetic table and handwheels. Used workshop grinder for flat grinding operations. Auction-ID: A1-49190-53

COMET universal vertical turret milling machine with swivelling head, manual table, vice and control panel. Conventional machine suitable for milling, drilling and light toolroom work. Auction-ID: A1-49190-47

Robust hydraulic pallet truck with a lifting capacity of 2,000 kg. Equipped with double load rollers and ergonomic drawbar control. Suitable for daily internal pallet transport in warehouse, workshop or business environment - Hydraulic lift control via drawbar - Operating lever in handle for lifting, neutral and lowering - 2 steering wheels - Tandem/ double load rollers at the fork ends - Steel forks - Robust welded construction - Compact and manoeuvrable - Color: yellow/black - Brand/model: unknown - UNUSED Auction-ID: A3-46152-10016

Robust hydraulic pallet truck with a lifting capacity of 2,000 kg. Equipped with double load rollers and ergonomic drawbar control. Suitable for daily internal pallet transport in warehouse, workshop or business environment - Hydraulic lift control via drawbar - Operating lever in handle for lifting, neutral and lowering - 2 steering wheels - Tandem/ double load rollers at the fork ends - Steel forks - Robust welded construction - Compact and manoeuvrable - Color: yellow/black - Brand/model: unknown - UNUSED Auction-ID: A3-46152-10017

General Description Universal vertical tool milling machine manufactured by the Kirov Machine Tool Plant, Odessa (USSR) . Designed for precision milling, drilling, slotting and general toolroom machining. The machine is equipped with a geared vertical spindle, T-slot work table and heavy-duty machine vise. Technical Details Manufacturer: Kirov Machine Tool Plant, Odessa (USSR) Machine type: Universal vertical tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle head T-slot machine table Heavy-duty machine vise included Longitudinal power feed Separate electrical cabinet Machine work light Condition Fair to good used condition. The machine appears mechanically complete with spindle gearbox, T-slot table, heavy-duty vise and electrical cabinet installed. Cosmetic paint wear, industrial staining and light surf ...

Serial number: 100135 Power: 1.1 kW Max. span: approx. 250 mm Reference: Walter - Lot 191 Auction-ID: A7-49834-27

Serial number: 00/138/95 Operating voltage: 230 V Connection: 60 W Reference: Baumstark - Lot 59 Auction-ID: A7-49882-89

Manual drum lifter from DENIOS with hydraulic lifting mechanism for the safe lifting and transport of drums. The device is designed for drums with a maximum weight of 300 kg and has a drum clamping device with gripping mechanism. It is used for internal logistics, in particular the handling and positioning of industrial and chemical drums. The device is used and shows normal signs of use due to use. A test sticker from LINDIG with next inspection year 2025 is available, a tested sticker documents an inspection on 07.10.2018.Scope of delivery: 1 drum lifter DENIOS FL 8-M Without further accessories Type: FL 8-M Year of construction: 2019 Max. load capacity (drum weight): 300 kg Serial number: 111310459-000100-001 Test standard: FEM 4.004 (95/63/EC, 99/92/EC, 2001/45/EC) Next inspection: 2025 ― Length: approx. 120 cm Width: approx. 100 cm Height: approx. 165 cm Auction-ID: A ...

For sale is a robust machine slewing crane with a load capacity of 1,500 kg, including HADEF hand chain hoist with 1.5 t load capacity and trolley. The crane was originally mounted on a 180 t injection moulding machine in a clean room. It was used there for lifting, assembly and maintenance work, as there was no overhead crane in this production area. The crane, the trolley and the chain hoist are operated manually. Technical data / equipment: Design: Machine slewing crane / assembly crane Crane load capacity: 1,500 kg Projection / arm length: approx. 1,100 mm Chain hoist: HADEF manual chain hoist Load capacity chain hoist: 1.5 t Manual operation Trolley / Chassis Solid steel construction Swivel design Originally mounted on a 180 t injection molding machine Location: Cleanroom production Dismantled state Scope of delivery complete according to illustrations Used condition with us ...

Working parameters: Universal manual grinding machine on a rack for tool sharpening. Equipment included: longitudinal table with T-slots, swivelling tool head, spindle/grinding wheel with protective housing, manual adjustments via handwheels, visible dial dial and pneumatic device. Notes: Industrial cast iron construction. Auction-ID: A1-50001-5

Manufacturer: VOLLMER Work parameters: Manual column grinding machine for sharpening cutting tools. Notes: Construction on cast iron column frame. Auction-ID: A1-50001-8

Manufacturer: VOLLMER / ELITE Working parameters: Universal manual grinding machine for sharpening and grinding cutting tools. Equipment included: longitudinal table with T-slots, swivelling grinding head, grinding wheel, swivelling and adjustable tool holder, manual movements via handwheels and integrated electric controls. Auction-ID: A1-50001-11

INTERSCIENCE - Scan 50 Pro - (07-2023) The Scan 50 Pro from the French manufacturer INTERSCIENCE is a new generation of manual colony counters. Designed to optimize the ergonomics of microbiology laboratories, it improves the technician's posture, protects the operator's vision and guarantees full data traceability Auction-ID: A1-49883-88

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.