127,361 used machines on RESALE, but how to find them? Machine Search
1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...
Key data: 630 mm
Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg
Weight: 0.1 tons Power: 0.6 Kw Waterpressure: 3 Bar Length mm: 1600 Width mm: 900 Height mm: 1300 Working height: 90 cm Transport size L x W x H: 2,5 x 1,36 x 1,3 Min.-max glass size: 1,20 x 55 cm Number of spindles: 1 Condition machine : Good Control type: Manual Electric. Connection: 16A 400V Documentation: No Instructions: No Electric diagram: No Parts list: N/a Available software: N/a Photos/film available: Photos and video available
Manual Roll Stacker and Turner for Tetra Pak Packaging Material Rolls Practical manual handling device designed for safe stacking and turning of Tetra Pak packaging material rolls in production and warehouse environments. This unit is brand new and unused, making it an excellent solution for efficient roll handling in carton packaging facilities. General Information - Machine Type: Manual Roll Stacker and Turner - Application: Handling of Tetra Pak packaging material rolls - Year of Manufacture: 2023 - Condition: New and unused - Working Hours: 0 hours Technical Specifications - Maximum Pick-Up Weight: 400 kg Key Advantages - Designed specifically for Tetra Pak packaging material rolls - Enables safe lifting, stacking, and turning operations - Manual operation for flexible use in production or storage areas - Brand new unit with 0 working hours - Suitable for packa ...
- Condition: Presentation Machine - Usable volume: 80 L
6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen
The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.
We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.
Key data: 10 t
Various spare parts for eccentric press - brands SMERAL and VSS KOSICE
Manufacturer: Eurotherm Year of Manufacture: 2019 Type of Machine : Manual Wash Booth with Automatic Spray Ring Condition: Good, regularly maintained (once per year) Cabin Dimensions - Internal Width: 4,000 mm - Internal Length: 7,000 mm - Internal Height: 3,500 mm - External Width: 4,100 mm - External Depth: 7,100 mm - External Height: 4,100 mm (double base tray) Construction - Cabin Type: Closed - Exhaust Air: Extraction at end of cabin - Panel Thickness: 50 mm with polyurethane insulation - Inner Walls: Stainless steel AISI 304 (V2A) - Outer Walls: Galvanized sheet metal, painted - Steel Profiles: Blue RAL 5002 - Access Door: 1 door, manual 4-leaf type, 4,000 x 3,500 mm, Blue RAL 5002 Exhaust and Ventilation - Air Flow Rate: 10,000 m3/h - Fan Motor Output: 1.5 kW - Droplet Separator: Yes - Chimney: Included, height 6.5 m - Lighting: 8 LED fixtures Automatic Spray Ring - Max ...
Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...
200 lt manual blasting machine set Whole set contents to be delivered below: • 200 lt automatic sandblasting pot • 20 mt blasting hose • 40 mt pneumatic hose • 20 mt oxygen hose • Sandblasting mask • Full body leather overalls • Automatic valve • SGV valve • Air stand • Blasting nozzle • Adapter • Coupling • Blasting claw couplings
Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...
Manufacturer: SCM Model: Minimax E10 Year of Manufacture: 2019 Type of Machine: Manual ABS Edge-Banding Machine for Curved Surfaces Version: CE Technical Data: - Thickness of pre-cut strip edging: 0.4–3 mm - Edging thickness with guillotine (edge height 80 mm): 0.4–1.5 mm - Edging thickness with guillotine (edge height 50 mm): 0.4–2.5 mm - Edging thickness with guillotine (edge height 45 mm): 0.4–3 mm - Edge height: 10–84 mm - Panel thickness: 8–80 mm - Minimum panel width: 50 mm - Minimum applicable edging length: 210 mm - Minimum internal radius with 0.4 mm edging, concave surface: 25 mm - Minimum internal radius with 0.4 mm edging, convex surface: 5 mm - Feed speeds: 4 / 8 m/min - Working temperature: 140–220 degrees C - Installed power: 3.5 kW / 380 V / 50 Hz - Machine body dimensions: 1,000 x 740 x 1,100 mm (height) - Roll-holder plate diameter: 520 mm - Compress ...
Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)
ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) hopper feed mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900
Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations
Lmacchia Barley twist lathe- model012/FE Spiral/rope turning lathe Barley twist with automatic indexing 67" max. length 8" max. working diameter as new condition...$9,500 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)
Excellent Complete Myford Super 7 Metric Lathe Gearbox & Power Cross The lathe also comes with various extras which i will list out below. I may miss some but will do my best 5" 4 jaw self centering chuck (Pratt Burnerd) 3" 4 jaw self centering chuck (Pratt Burnerd) 6" 4 jaw independant chuck (Pratt Burnerd) 3" 3 jaw Self centering chuck (Pratt Burnerd) 4" 3 jaw self centering chuck (Pratt Burnerd) Many of the chucks got internal and external jaws 6 jaw swiss chuck with internal and external jaws Albrecht 0-3mm chuck with morse taper no1 Albrecht 0-6.5mm chuck with morse taper no1 Jacobs 0-3/8" chuck with morse taper no1 9" face plate 7" face plate x 2 6" face plate Jacobs 1/2" tailstock chuck Jacobs 3/8" tailstock chuck Jacobs 3/8" tailsock chuck Jacobs 1/4" tailstock chuck German 1/4" tailstock chuck Myford vertical slide swivel type with dials fitted Myford ...
3-speed 380V, 2-stage motor, runs smoothly! Forward and reverse rotation. Geared spindle drive, gears run in oil. 16 spindle speeds adjustable from 40 to 2000 RPM. Automatic feed in longitudinal and cross directions. Norton gearbox for easy thread cutting, change gears included. MT3 tailstock taper. Coolant pump. Foot brakes. Splash guard. Chuck safety guard. Quick-change tool post with 3 holders. D1-3 Camlock main spindle taper. Made in Great Britain! Includes accessories as shown in the pictures. Center distance: 750 mm Center height: 165 mm Spindle bore: 33 mm Overall dimensions: 160 x 80 x 130 cm Shipping available throughout Europe!
Double head lathe for milling and turning tubes Automatic (un)loading of workpieces nbsp;
Rotary Lathe with Staylog Bar and Longitudinal Cutting System
Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes
used
AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.
HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X/Z: 15 Nm Movement on Y axis: + 55/-55 mm; Moment on axis B: 20 N. m; Time to change tool 1.6 sec Positioning accuracy 0.005 mm Moves on axes X1/X2- 350 mm Moves on axes Z1/Z2- 1100/1350/1850 mm ...
Calpe (5) station CNC lathe
3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg
Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg
Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T
This 600 Lathes Multiturn 2000 was manufactured in 2004. A robust horizontal turning machine featuring a turning diameter above bed of 400 mm, and a length of 1250 mm. It operates at a spindle speed of 2700 rpm with an 8-position turret. Tailstock taper is Morse 5. If you are looking to get high quality turning capabilities consider the 600 Lathes Multiturn 2000 machine we have for sale. Contact us for more information.
Turning and milling machine combined in one machine. The most stable table milling machine in the world! Machine tool MD-23 Rotary equipment: - complete tailstock - Three-jaw chuck with jaws stepped inwards and outwards - Turning tool holder - matching feed flange Horizontal milling device: - milling shaft - Counterholder including fastening rails Tools and clamping devices - Machine vice - a selection of cutters and holders - different rotating center punches - two boring heads - Cone wiper - Clarkson collet holders - ER32 collet holders And original Waldmann machine light
Universal lathe Harrison M250 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Universal lathe Harrison M250 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Universal lathe Harrison M250 Price: 6000 EUR Download PDF Universal lathe Harrison M250 The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. Technical data: Turning diameter over the bed: 280 mm Turning diameter over the slide: 170 mm Turning Length: 680MM Rotation speed: 40 – 1500/9 step U / min Spindle bore: 35 mm Tailstock taper MK: 3 ...
Power supply: 240V; Power consumption: 0.33 kWh; Sturdy metal construction; Silicone seal for tight closure; Temperature control; Replaceable attachments Auction-ID: A7-48577-100
COER model ED-12 manual parallel lathe. Includes 4-claw independent chainring, fixed window and accessories visible in the photographs. Approximate distance between points: 4,000 mm. Turning on approximate bed: 800 mm. Approximate dimensions: 7,000 × 1,800 × 1,900 mm. Approximate weight: 7,000 kg. Technical data, dimensions and weight subject to verification. Auction-ID: A7-48385-13
Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well
Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.
Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm -Weight: 1.4 kg
Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg
Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
pressure: manuell t distance between columns: 50 mm dayligth: 50 mm total power requirement: kW weight of the machine ca.: 0,01 t dimensions of the machine ca.: 0,3 x 0,3 x 0,3 m • 4 units available, • bore at bottom, Ø 10 mm, • thread in spindle M 6, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spoon width 1100 x 550mm 2 x 150 mm wide Auction-ID: A1-47350-265
Equipped with: manual turning, pre-shearing, three-point attachment Auction-ID: A1-47380-136
Mounted on a mobile table, without accessories Auction-ID: A7-48794-172
maximum number of results exceeded
please refine your search
210 € 
