manual lathe used for sale

Machine number: 0307-1866 Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Operating hours: 9316 Control: SIEMENS SINUMERIK 840 Dsl Working height: approx. 1300 mm Workpiece length: min. 780 mm/max. 3000 mm Workpiece diameter: min. 20 mm/max. 200 mm max. workpiece weight: 250 kg Workpiece drive/voltage: 2 x hydraulically operated front end chuck, manufacturer SAV max. chuck passage: diameter 210 mm Spindle power: 2 x 37 kW Speed: 2200 rpm Carriage Paths Cross Slide NC1 - left: X1 axis: 450 mm Z1 axis: 1980 mm Cross slide NC2 - right: X2 axis: 450 mm Z2 axis: 1980 mm M - head - slide - left Q1 - axle: 1980 mm M - head - carriage - right - Q2 - axle: 1980 mm tailstock carriage + steady rest - left W1 - axle: 1980 mm tailstock carriage + steady rest - right W2 - axle: 1980 mm max. rapid traverse speed: 20 m/min incl. PROMAT gantry loading system with two loading units as well  ...

Support, travel carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

Machine number: 01180000711 Operating voltage: 400 V Frequency: 50 Hz Rated current: 100 A Connection: 58 kVA Control: HEIDENHAIN CNC PILOT Turning length: 1000 mm Rotation diameter over bed track cover: 680 mm Circulation diameter over plan guide cover: 455 mm Plane travel: 320 mm Longitudinal travel: 1097 mm Main spindle Spindle head diameter: 220 mm Spindle head diameter in front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 315/400 mm X-axis feed force: 8 kN Z-axis feed force: 15 kN Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min incl. 12-fold tool turret incl. tailstock Quill diameter in the front area: 120 mm Quill stroke: 120 mm Quill holder: MK 5 Attention: the loading system of the manufacturer PROMAT shown in the photos is not included in the scope of delivery! Only the CNC lathe is sold. incl. accessories such as a rotating steady rest from the manufactu ...

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11, Interchangeable Wheels , Other EMCO Parts: Clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

Hydraulische bril Swing over bed: 762 mm Distance centre tot centre: 1118 mm Max longitudinal travel Z-axis: 1118 mm Max cross travel X-axis: 508 mm Spindle cone: A2-8 Dia of spindle bore: 117 mm Power on the spindle: 45 kW Number of speeds: 2400 rpm Command: Haas Length: 5490 mm Width: 2415 mm Height: 2794 mm Weight: 10 ton Toolchanger: yes Number of tools: 12 driven positions

Haas ST-25Y Ø 381 x 533 mm CNC Swing over bed: 381 mm Distance centre tot centre: 533 mm Max longitudinal travel Z-axis: 533 mm Max cross travel X-axis: 214 mm Spindle cone: A2-6 Dia of spindle bore: 76 mm Power on the spindle: 22,4 kW Number of speeds: 4000 rpm Command: Haas Length: 3180 mm Width: 1980 mm Height: 1960 mm Weight: 6 ton Toolchanger: yes Number of tools: 12 driven positions

Type: 2280ENC Multifix gereedschapshouders 1 bril Swing over bed: 600 mm Swing over cross-slide: 390 mm Distance centre tot centre: 2000 mm Spindle cone: D-1-8 Dia of spindle bore: 80 mm Power on the spindle: 7,5 kW Number of speeds: 91 > 1800 rpm Command: Fagor Length: 3760 mm Width: 1830 mm Height: 2260 mm Weight: 3,2 ton

CNC-draai- en freescentrum Type: Multus B300 - 1SW De Multus B300W staat bekend om zijn vermogen om diverse bewerkingsprocessen, waaronder draaien, frezen, boren en tappen, te integreren in één gestroomlijnde bewerking. 2 spindels X-as: 580 mm Y-as: 160 mm Z-as: 945 mm B-as: 225° C-as nr1: 360° (0,001°) C-as nr. 2: 360° (0,001°) W-as: 1000 mm Gereedschapswisselaar met 60 posities: - HSK63A - maximaal 10.000 toeren per minuut - 16/11 kW Staafaanvoer LNS 6.68 HS bis D 70 mm - staaflengte 3 meter Spanentransportband Een ruime selectie aan gereedschappen inbegrepen. Swing over bed: 450 mm Distance centre tot centre: 900 mm Max longitudinal travel Z-axis: 945 mm Max cross travel X-axis: 580 mm Dia of spindle bore: 70 mm Power on the spindle: 22 kW Number of speeds: 38 > 3800 rpm Command: Okuma OSP P200L Length: 4400 mm Width: 2032 mm Height: 2590 mm Weight: 10 ton Toolchang ...

CNC lathe with driven tools, year 2018, CNC NGC. Used machine. More info & price on IndustrialBuyer.

Offered for sale is a robust universal CNC lathe. Turning length: 3000mm, max. torque: 2240Nm, spindle speed range: 16-2500rpm, feed rate: 0.001-9999.999mm/min, rapid traverse rate: 10000mm/min, feed force: 15kN, tailstock quill force: max. 15kN, control: FANUC 15 TF. Equipped with hydraulic tailstock, drum turret, steady rest (range 72-220mm and 28-120mm), various spare parts, defects: machine bed worn, X-axis bearing arrangement makes noise. Weight: approx. 8500kg, overall dimensions X/Y/Z: approx. 6500mm/2200mm/2000mm. Inspection possible by appointment.

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

Manufacturer: Microcut Model: BNC-2240X Type of machine: Semi-CNC Lathe Year of manufacture: 2005 Condition: Good Technical Data - Accessories: Several tool holders are included - Main voltage: 220 Volt - Frequency: 50 Hz - Main motor power: 11 kW - Other motor power: 7.0 kW - Total power: Approximately 18 kW - Amperage: 28 Amps, 14 Amps, and 42 Amps

Max. swing over bed: 615mm, max. swing over cross slide: 345mm, distance between centers: 3000mm, spindle bore: 70mm, spindle taper: MT5, forward speed steps: 18, forward speed range: 14-750rpm, reverse speed steps: 9, reverse speed range: 21-857rpm, standard longitudinal feed: 32 steps, 0.1-1.42mm/rev, standard cross feed: 32 steps, 0.03-0.46mm/rev, fine longitudinal feed: 8 steps, 0.048-0.089mm/rev, fine cross feed: 8 steps, 0.015-0.028mm/rev, coarse longitudinal feed: 32 steps, 1.52-2.28mm/rev, coarse cross feed: 32 steps, 0.48-7.2mm/rev, rapid traverse longitudinal: 6m/min, rapid traverse cross: 2m/min, metric threads: 54, range: 1-240mm, Whitworth threads: 37, range: 1-28threads/inch, compound slide travel: 230mm, cross slide travel: 400mm, distance from spindle center to tool holder: 32mm, tool dimensions: 30x30mm, tailstock quill diameter: 100mm, tailstock taper: MT5, quill travel ...

Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. th ...

Manufacturer: OKUMA Model: Mac Turn 250 Rated Voltage: 400 V Number of Phases: 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

X-axis: 330mm, Z-axis: 1650mm, max. swing over bed: 910mm, swing over cross slide: 560mm, distance between centers: 1820mm, standard turning diameter: 450mm, max. turning diameter: 610mm, max. turning length: 1650mm, bar capacity: 184mm, spindle speed: 12-1200rpm, spindle nose: A2-15, spindle bore: 200mm, spindle bearing diameter: 266mm, turret type: T10, square tool height: 32mm, boring bar holder diameter: 65mm, tailstock travel: 1400mm, quill stroke: 200mm, tailstock taper: MT5, tailstock quill diameter: 160mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, jog feed X-axis: 0-1260mm/min, jog feed Z-axis: 0-1260mm/min, spindle motor power: 30/37kW, X-axis servo motor: 4kW, Z-axis servo motor: 7kW, hydraulic pump: 2.2kW, lubrication pump: 0.004kW, coolant pump: 1.1kW, connected load: 52kW, coolant tank capacity: 300l, hydraulic tank capacity: 83l, lubricating oil tank c ...

Key data: 330 mm, 635 mm

Stock No.: 4042 LATHE Manufacturer: COLCHESTER, Type: STUDENT 2500 Serial No.: 307802, Year of manufacture: 2010 Specifications: Turning length 635 mm Center height 165 mm Turning over bed 330 mm Ø Spindle bore 40 mm Ø Spindle speeds 40-2500 rpm Spindle motor power 2.2 kW Accessories:                             Cooling water system                    Multi-Tool Holder                Various Tool Holders 2 pc Centering chuck                      Dimensions: Length: 2200 mm, Height: 1500 mm, Width: 1100 mm, Weight: 800 kg

Offer 26312 Technical data: - Largest circulation - Ø over bed 550 mm - via flat slide 310 mm - Turning length approx. 1500 mm - Travels - Z – axis 1600 mm - X – Axis 300 mm - Spindle holder according to DIN - Spindle bore 82 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 150 mm - Spindle speeds 80 - 3500 rpm - Rapid traverses X / Y - Drive 17 kW - with: - CNC control FAGOR - Hydr. Chuck clamping - electr. Handwheels - 8-fold tool station - man. Tailstock - Coolant device - Space requirement approx. W 4400 x H 2100 x D 2300 mm - Weight approx. 4400 kg

faceplate diameter: 4000 mm swing diameter: 4600 mm turning height: 2650 mm workpiece weight: 100 t max. torque on the faceplate: 178,4 kNm faceplate speeds from - to: 1,8- 80 U/min feed stepless: 0,1 - 6000 mm/min z-axis: 1500 mm Control: Siemens 880T drive motor: 100 kW ram head dimension: 300 x 300 mm x-axis: R: 2500 / L: 2500 mm y-axis: 2900 mm z-axis: R: 200 / L: 1500 mm ram head dimension: 300 x 300 mm total power requirement: 69 kW weight of the machine ca.: - t dimensions of the machine ca.: 17,5 x 10.5 m - CNC control Siemens 880T - Coolant system - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2500 mm swing diameter over bed slide: 1400 mm turning length: 6000 mm Distance between centres: 5740 mm centre height: 1250 mm faceplate turning speed range: 4 - 400 U/min rapid traverse:: 200 mm/min faceplate: 2000 mm spindle bore: 200 mm face feeds: 700 mm upper slide-adjustment: 350 mm tailstock quill diameter: 320 mm max. workpiece weight between centres: 40 t Control: Siemens Sinumerik 8 T drive motor: 95,5 kW total power requirement: 125 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 11,5 x 3,5 x 3,5 m Heavy duty high precision horizontal lathe with: - CNC Control Siemens Sinumerik 8T (CNC 6 axes) - 3-way Bed - hydraulic clamping system Rohm - Machine modified with 2000 mm face clamping plate - slide with two working positions - Sauter 4 side tool holder - circular turning unit - tailstock - chip conveyor - Rexroth Hydraulic suitable for both,  ...

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Handover: in its current condition as inspected -Condition: Problem with the lead screw -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Bulharian ZMM lathe C11MT/1500

Daewoo Puma V 550Year of manuf. : 2001 Control : Fanuc 18i-T Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 18i-TMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpChuck:3-jaw chuck

Daewoo Puma V 550Year of manuf. : 2005 Control : Fanuc 21i-TB Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 21i-TBMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpTool measurement:Renishaw tool setterChuck:SMW Autoblok 3-jaw chuck

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 5000 mm spindle speed:: 1.6 - 315 U/min spindle motor: 75 kW spindle bore: 105 mm tailstock quill diameter: 280 mm quill stroke: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t feed: 0,18 - 160 mm/U thread - mm pitch: 1 - 192 mm thread - inch: 30 - 1/8 inch. total power requirement: - kW weight of the machine ca.: 38 t dimensions of the machine ca.: 10,7 x 2,2 x 1,9 m Fitted with: - DRO - Chuck, 1250 mm diameter - Tailstock - 2 centres - Removable grinding unit - Milling unit with ISO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conventional lathe Trens SN 710s BJ 2003

The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.

Tool holder: Capto C 5 MAPPS control system Renishaw HPRA (Manual Tool Presetter) Blum Laser Control Direct measuring system X;Y; Z; B Collet Chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece Conveyor Belt Bar Feeder Breuning Irco ILS-RBK-10012 Knoll belt filter KF10/500 / IKZ by milling spindle 7-stage up to 70 bar Chip Conveyor ConSep 2000 Auction-ID: A7-50158-6

Machine with SIEMENS SINUMERIK840D control, main and counter spindle, Chip conveyor, oil mist separator, DMG-Automation WH10top. Main spindle ISM90: hollow clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91, ISM76 sub-spindle: partial hollow clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91, Gripping device with integr. Conveyor belt, autom. Protective cover, differential pressure spans. With pump rack for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant system, was connected to the control center. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece gripper for turret Auction-ID: A7-50158-7

Machine package consisting of: 1 CNC lathe WEISSER Univertor AS 400, built in 2005 1 CNC lathe WEISSER Univertor AS 400, built in 2008 1 CNC lathe WEISSER Univertor AS 400, built in 2008 CNC lathes with control SIEMENS SINUMERIK 840D, screw conveyor with chip crusher and pump-back station, NC steady rest SMW-SLU-1-OLD Ø10-70mm, 12-cavity tool turret SAUTER 0.5.440.220, NC tailstock, Artis breakage monitoring, pickup loading via pallet belt. Without coolant system, was connected to central supply. The machines can be demonstrated under power. Auction-ID: A7-50158-14

Chip conveyor Spindle air conditioner HYFRA Coolant system Knoll Spindle head according to DIN 55026 - size 6 Spindle diameter in front bearings Travel x=300 mm Travel z=700 mm Tool holder VDI 40 Auction-ID: A7-50158-4

Vertical lathe with control Siemens SINUMERIK 840D, chip conveyor, Suction, infeed and discharge, reversible gripper. Auction-ID: A7-50158-10

OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-22

FANUC Series 32i-MODEL B control, with bar feeder TOP AUTOMAZIONI XF365 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-20

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-256

DL-35M motorized turret, FANUC Series Oi-TF control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-13

12-position turret, 500GH spindle, MORI SEIKI MSD-501II control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-14

FANUC Series 18i-TB control, with TOP AUTOMAZIONI FU350SX bar feeder - year 2024 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-21

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-327

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-309

HEMPEL CKE semi-auto lathe 20 Long. max 2000 mm, max Ø 250 mm. Manual/auto controls, longitudinal carriage, 3-jaw chuck. Robust construction for wood or metal turning, suitable for prod. medium. Reliable and versatile machine. Auction-ID: A1-50215-39

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-24

FANUC Series 18i-TB control, IEMCA AUTOMATA 2.5 loader robot - year 2010 AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-23

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50066-454

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-251

OKUMA OSP-U100L control, with bar feeder TOP AUTOMAZIONI XF370 Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-19

engine lathe, year 2007, CNC 840 D. Used machine. More info & price on IndustrialBuyer.

Traub TNK 65Year of manuf. : 2016 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):35 kWTorque (max.):120 NmBarcapacity:65 mmWorkpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:Motor spindle, integrated in tool carrier IISpeed:7.000 rpm:Power (max.):12 kWTorque (max.):22,5 NmChuck:Hainbuch Spanntop Kombi Axfix Gr. 42Toolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmToolcarrier II (X/Y/Z):Technology:Turret with 9 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmBackworking attachment:Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron)Driven Tools:5 stationsTooldrive:12.000 U/min, 6,7 kW, 5,3 NmEquipment/Accessory:Positionsensor:Direct Sca ...

sliding headstock CNC lathe, year 2015, 2368 operating hours, CNC 31i-MODELB. Used machine. More info & price on IndustrialBuyer.

Parallel Lathe COLCHESTER MASTER VS 3250 Year of construction: 1996 Between points: 1250 mm Max diameter in front of bench: Ø 340 mm Maxi Ø over saddle: Ø 160 mm Centre height: 170 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 3250 RPM 3-jaws chuck Ø 200 mm Turret Mutifix B Metric Withworth threading 3-points steady Tailstock CM4 Scale WIZARD 150 PLUS Longitudinal + transversal auto feeds Spindle speed by electric drive Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1400 x 1700 mm Weight: approx 2 T