127,554 used machines on RESALE, but how to find them? Machine Search
Heavy-duty hand chain hoist KITO CB150 - 15t (15,000 kg) Manufacturer: Kito. Made in Japan. Lifting height: 3.50 m Load: 15,000 kg Load chain diameter: 9.0 x 27.0 mm Weight: 155 kg The device has a current inspection sticker from Kito Europe (valid until 12/2024), which proves that it is in perfect technical condition. The load chain (9.0x27mm) and hooks are optically in top condition, no visible deformation or corrosion. The nameplate is perfectly legible (serial number available). A physical test book is not included in the scope of delivery, but can be easily recreated due to the database. Areas of application & details: Kito CB150, hand chain hoist 15t, pulley 15 tons, heavy duty hoist, Kito M3B, chain hoist used, workshop crane hoist, industrial chain hoist, load lifter 15000kg, Kito Europe, hoist test UVV, chain hoist 3.5m stroke, heavy duty crane accessories, constru ...
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
Basket size LxWxH:900 x 1.500 x 500 mm Max. basket weight:- kg No. of washing chambers:1 filling amount:min. 270, max. 400 l Machine weight:2.000 kg dimensions of machine:2.650 x 1.945 x 1.870 mm
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
pressure: 5 t distance between columns: 300 mm dayligth: ? mm weight of the machine ca.: - t dimensions of the machine ca.: - m Handspindelpresse 5 to Workspace: Tischfläche 280 x 260 Control: ca. 180 mm Hub The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
manueller Deckenherstellung - manual Casemaker Schmedt PräDeck Year 05-1986 - Serial-Nr. 246 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Lever hoist, ratchet hoist KAISER +KRAFT Type: 1117 Load capacity: 3000 kg Chain length: 1500 mm used, tested ! Dimensions: 800 x 250 x 230 mm
Lever hoist, ratchet hoist PAGUS load capacity: 6300 kg stroke: 3000 mm with roller chain used, tested ! weight: 59 kg Dimensions: 1000 x 800 x 230 mm
Hand Control Valve, Hand Control Valve WMW St H2 ND: 1.0 MPa NW: 6 mm used ! Dimensions: 140 x 110 x 130 mm
Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
Manuals for Heidelberg Quickmaster 46- one and two color: Spare part book -multilingual and instruction manual in German. In very nice condition, no pages missing. Can ship worldwide.
pressure: 28 t distance between columns: 510 mm dayligth: 380 mm stroke: 260 mm weight of the machine ca.: ca. 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t distance between columns: 260 mm dayligth: 210 mm table surface area: 275 x 260 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of construction 2020 manual bookbinding machine Table model for manual operation Delivery date: short-term Price on request. We supply and install worldwide.
pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...
pressure: 12 t distance between columns: / mm dayligth: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forklift hydraulic/manual operations, max load wight 600 kg
New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.
New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,
Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg
Soxtec FOSS ST 243 Manual Extraction System Semi-automatic laboratory extractor Reference : ST243 SOXTEC With Controller: CU 2046 Control Unit Year of manufacture: 2016 Without accessories Animal feed, feed ingredients, fodder, pet food, human food, food ingredients, grains, cereals, oilseeds, DDS, meat, meat products, fish, fish products, dairy products, environmental products (e.g. soil, sludge, wastewater) and other industrial products (e.g. pulp, textiles, rubber, tobacco, fertilisers, detergents, plastic materials, etc.). Crude fat, total fat and extractables
- manufactured entirely from stainless steel AISI 304, - designed for the internal rinsing of new bottles and jars, -completed with the use of pre-filtered air or water via spray nozzles prior to container filling Method of function. - the operator manually collects the container and inverts it over the spray nozzle, - the application of light pressure opens the liquid/pneumatic valve internally rinsing/blowing the container, - a short standing time should be allowed for any residual water to drain, - the machine will be supplied with water or air filtration system to suit customer requirements. Production: indicative up to 300 b/h Dimensions: 600mm X 500mm X H 600 Weight: 25 kg. Optional: recirculation with pump
- Version for 3 lt bottle (double magnum) - for champagne capsule - works by pneumatic operation with 2 passages: -- First passage: pleating. -- Second passage: smoothing. Production: 100 bottles/hour Workable materials: Bottles 3 Lt - Capsules with max. length 150 mm Dimensions: 90 x 55 x 30 cm (length x width x height) Weight: 25 Kg
pressure: 25 t spindle diameter: 70 mm stroke: 210 mm table-size: 350 x 500 mm total power requirement: kW weight of the machine ca.: 0,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. format 52 x 52 cm Year of construction 2002 Block Glue Press manual block gluing machine for cold glue Table model Delivery date: short-term
Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3
See attached specifications. Collection by Appointment. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-48194-6
Serial number: 100135 Power: 1.1 kW Max. span: approx. 250 mm Reference: Walter - Lot 191 Auction-ID: A7-48268-27
Ingot / Bar Casting Moulds and Foundry Equipment General data: Equipment type: Casting moulds and handling tools for aluminium Application: Aluminium ingot / bar casting Main components: Long rectangular refractory-lined moulds (for aluminium bars/ingots) Multi-cavity cast iron moulds Smaller block-type moulds (stacked, for small ingots or test pieces) Handling tools: Manual ladles for pouring molten metal Tongs, rods, and skimming tools Additional equipment: Steel working table / rack Custom frame for holding moulds during pouring Description: Complete set of casting moulds and auxiliary equipment used in aluminium foundry operations. The system includes various mould types for producing ingots and bars, along with manual handling tools and support structures for efficient and safe casting processes. Auction-ID: A7-48441-19
Technical details Type: Industrial workbench station with tooling and storage Configuration: Multi-section steel workbench with integrated storage and tool wall Bench: - Steel frame with heavy-duty worktop - Length: Approx. 3000–4000 mm - Integrated drawers, shelves, and cabinet sections Tool storage: - Pegboard/tool wall with mounted hand tools - Plastic storage bins with components Additional storage: - Metal cabinet (2-door) - Drawer units and shelving Contents include: - Hand tools (wrenches, files, calipers) - Abrasives (grinding wheels, sanding belts) - Clamps, fittings, and mechanical parts Application: Manual assembly, repair, machining, and maintenance workstations Condition: Used, with wear, damaged work surface areas, oil stains, and mixed tooling condition Dimensions and weight (approx.) Length: 3000–4000 mm Width: 800 mm Height: 900 mm Weight: 2 ...
Technical details Manufacturer: REMS (Germany) Type: Manual pipe thread cutting die stock Operation: Ratchet type Thread size: R 1 1/4\" (approx. 1¼ inch) Thread standard: Likely BSPT (R thread) Marking: REMS / No. 43 Application: External threading of pipes Use case: Plumbing, industrial pipework, workshop maintenance Equipment - Ratchet lever - Die head / die stock - Thread size marking R 1 1/4\" Auction-ID: A7-48441-98
Hyllus 285 three-roll manual plate bending machine for bending and calendering sheet metal.
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-48621-58
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48622-67
With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-48622-168
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48622-297
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-48622-58
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48621-67
With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-48621-168
maximum number of results exceeded
please refine your search
10 € 
