mann hummel used for sale

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/outlet: O 52/46 mm -Part Number: 44 100 92 921 -with air filter: C 11 100 -Price: per piece -Number: 7 pieces -Dimension: Ø 190/285 mm -Weight: 1.15 kg

: 149207/45 A pressure / power: 10 bar Motor output: 55 kW : 8,2 m³/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressor system composed of: Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min 3,000 min-1 45 kW Digital Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 min-1 45 kW Compressed Air Refrigerant Dryer Manufacturer: MANNESMANN DEMAG Type: AD160AB Year of construction: 1993 Oil-water separator Type: ÖWAMAT 6 Compressed air tanks Manufacturer: LOHENNER Type: ZU47/21 Volume: 5,000 l Standing version Year of construction: 1993 Overpressure 11 bar

HYDRAULIC PRESS with hot platens model MANNI PMC 90/36 second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.70 max. thrust Ton.90 opening mm.430 hydraulic pump motor power Hp 2 hot water plates heating via wood boiler weight kgs. 3800 volt. 380/50

Description Mannesmann Demag hoist Max load : 200 Kg chain length: 3 m Power strip length: 6 m Power supply: 400V Power: 0.2 kW

including bending jigs

Hydraulic pressure: 210bar, weight: 3.1t.

Hydraulic pressure: 210bar, weight: 3.7t.

Volume flow: 13.3m³/min, rotational speed: 1500/min, connected load: 90kW.

Volume flow: 18.9m³/min, rotational speed: 3000/min, connected load: 132kW.

Discharge pressure: 8bar, suction pressure: 1000mbar, volume flow: 337m³/h, rotational speed: 1475/min, shaft power: 36kW, motor power: 37kW, operational hours counter: 25,438h, with documentation.

There are three identical gearboxes available, one has been completely overhauled, the other two were in use until the end and are also in working order, an on-site inspection is possible.

Mannesmann Demag pallet train, type: DESTAMAT 1020 I, fabrication number: 582 896-02, year of construction: 1992, maximum capacity: 1000 kg (including 1 operator), dimensions: 4700 mm x 1400 mm x 20000 mm.

output: 20 PS : Glühkopf, Eisenräder : schöne, seltene Maschine tare: 2050 kg cubic capacity: 4788 ccm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 1992 Operating hours: 1240 (as of 18.04.24) Ab. Total weight: 2000 kg

volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic drive with hydro motor Electrical power: 55 kW Hydraulic pump: Manufacturer: MANNESMANN REXROTH Type: A4VSG250E01/10R-PPB10 Hydromortor Manufacturer: RIVA CALZONI Type: MR4500LPITIN1N1 Outlet shaft diameter: 110 mm Shaft length: 185 mm Weight: ~450 kg Overall size (without shaft): diameter: 850 mm height: 600 mm

MANN Filter Part number: CF 400/1

MANN Filter, for engine 28/32 Part number: CF 1000

MANN Filter, for engine 28/32 part number: C 20 325/2

MANN Filter, for engige 28/32 Part number: C 16 400

amount: 1 STK height: 450 mm external diameter: 340 mm Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air filter MANN + HUMMEL MANN - Piclon 45 920 92 404 40 m3/min < br />Filter element: C 33 920/3 Secondary filter: CF 2100 Connection diameter: 210 / 200 mm Dimensions: 1200 x 750 x 550 mm

Filter housing MANN + HUMMEL Europiclon 44 200 92 920 Connection diameter ( inside ): Ø 53 / 58 mm for filter element: C 14 200 New ! Dimensions: 355 x 205 x 230 mm

Air Filter MANN + HUMMEL, KAESER 45 650 92 172 Filter element: 6.1989.0/A Connection diameter: Ø 130 mm used, tested ! Dimensions: 750 x 430 x 380 mm

Air Filter MANN + HUMMEL Europiclon 45 200 92 940 Flow range: 2 - 4.5 m3/min Filter element: C 14 200 Connection diameter: 40 / 60 / 63 mm used, tested ! Dimensions: 370 x 310 x 210 mm

Line filter MANN + HUMMEL 67 502 62 026 Filter cartridge: W 920 14 bar 25 l/min New ! Dimensions: 150 x 115 x 100 mm

HEPA filter for duct installation MANN + HUMMEL Hepatex N H13 Hepatex N H13 609x609x292mm HC Galv 5101343209 Nominal flow rate: 4000 m3/h enpfolener Final pressure loss: 290 Pa ( 2,) 9 mbar ) Filter material: Micro glass fibre medium Frame: Steel, galvanised New ! Dimensions (filter): 609 x 609 x 292 mm Dimensions ( packaging ): 630 x 350 x 640 mm

Filter housing MANN + HUMMEL Europiclon 44 200 92 920 Connection diameter ( inside ): Ø 53 / 58 mm for filter element: C 14 200 without filter cartridge used, tested ! Dimensions: 355 x 235 x 210 mm

Line filter, double filter MANN + HUMMEL 67 730 62 266 Filter cartridge: WD13 145 20 bar 360 l/min with used and cleaned filter cartridges ! used, tested ! Dimensions: 610 x 420 x 150 mm

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Cat. No. 09-1590-1 New Standard: - with residual outlet with inclined seat disc valve DN 50 - with cylindrical conical bottom at the bottom and top - Test pressure: 1.5 bar - permissible operating pressure: 0.49 bar - Material V2A AISI 304 - Surface inside and outside IIIC - With mannhole DN 400 with 6 screws, overpressure valve - Threaded connection connector DN 25 and with inclined disc valve DN 25 Cat. No. Content: Diameter: Ges.Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg On request with (please ask prices): Fermentation spandconnection DN 50 CIP Cleaning Fermented spundar fitting Trial tap For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight c ...

Baader 200 Filleting machine for salmon species Machine for producing fillet of salmon, trout and the same fish species. It processes gutted and headed fish with or without collar bone. The fish is feed through the tools in such manner that the fillets does not get any stress - it is a prerequisite for a smooth surface of the cut. The salmon version produces both fillets with and without collar bone, and after adaptation, salmon sides on which the rib bones are retained. Capacity: 15-35 fish/min Working range: from 1,5 to 5,5 kg (gutted and headed fish) Power consumption: 5 kW Water consumption: 9 l/min Dimensions: 4,30 x 1,75 x 1,50 m Weight (net/gross): 1800/2230 kg

Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 &euro; Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Manufacturer: AHT Model: PARIS 210 (-)/(U) used Cooling: +3C to +15C Freezer: -18C to -23C Refrigerant: R290 Special feature: Plug-in ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, bows of the outer skin are spat on and reglued 3-sided. After that, they are repackaged in a transport-friendly manner. Also available from us: used AHT Paris/Miami /Athens

Manufacturer: AHT Model: PARIS 250 (-)/(U) used Cool: + 3°C to + 15°C Deep freezing:-18°C to-23°C Refrigerant: R290 Special feature: Tailer-ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, exploits of the outer skin are sped and 3-sided re-glued. After that, they are repackaged in a transport manner.

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

Manufacturer: AHT Model: Miami 145 (U) LED used Cool: + 3°C to + 15°C Deep freezing:-18°C to-23°C Refrigerant: R290 Special feature: Tailer-ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, exploits of the outer skin are sped and 3-sided re-glued. After that, they are repackaged in a transport manner.

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

Dobot collaborative robot Cobot CR 3 - new Range: 620mm Payload: 3kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing M ...

Toothed colloid mill,stainless steel,Mannesmann,4 kW motor,Ø 80 mm. head.

Dobot collaborative robot Cobot CR 16 - new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing ...

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 3 (60cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 1 ALLROUNDER 420  ...

Dobot collaborative robot Cobot CR 16 with SafeSkin- new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grindi ...