mann hummel used for sale

Max. load: 2t, arm length: 3000mm, height: 3200mm, with Chain Hoist Mannesmann Demag PK 1N.

Max. load: 125kg, arm length: 3000mm, height: 2400mm, with Chain Hoist Mannesmann Demag PK 1N.

General SKU084Y579 LocationBarneveld MakeDrais Mannheim TypeHT-1000 No.50766 Year of construction1982 Main Features MaterialStainless steel Volume1000 Ltr. Motor90 KW Specified Features - Powder turbo mixer Powder turbo mixer(1x) T-armscheck Capacity1000 Ltr Trough sizesdia. 1060x1180mm Top connectionsdia. 340mm + dia. 260mm + dia. 135mm Inspection hatch710x500mm Outlet500x300mm Glands air purgedcheck Motor90,0 KW + 37,0 KW, 380/660 Volt Speed mixing shaft80/30 Rpm With lump breakertype EMS-180 (2x) Motor18,5 KW, 380/660 Volt MaterialStainless steel 1.4541 (321) Information With switchgearcheckPowder turbo mixersDraisMixers > Powder turbo mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKUR0231 LocationBarneveld MakeDraiswerke GmbH Mannheim (D) TypeT-2000 SM No.51989 Year of construction1985 Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor24 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4541 (321) Powder turbo mixercheck Capacity2000 Ltr Trough sizesdia 1200x1950mm Inlet1090x900mm Top connectionsdia 80mm (1x) Inspection hatch550x400mm Outletdia. 300mm With jacket(150 ltr) Max. temperature165 degr. C With adjustable packing glandscheck Glands air purgedcheck Motor16 / 24 kW 380 Volt Ex Information Total height1,5 M Weight5000 Kg Floorspace4,4x1,6 M Extra Specificationsincluding Bucher filter. filter housing material 1.4301 including 2 filter cartridges (20 filter bags 450x1100 mm) and transport trolley to disassemble the filter cartridges, filter housing size  ...

General SKU262M262 LocationBarneveld MakeDraiswerke GmbH Mannheim TypeRN 2-24 No.52780 Year of construction1986 Material Pan materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Motor24 KW Specified Features - Dissolver MaterialStainless steel Dissolver/Homogenising vacuum mixer (1x) Shaft length± 900mm Disc diameterdia. 400mm With covercheck Motor24,0 KW, 380 Volt (Ex) With panscheck Capacity± 300 Ltr Pan sizesdia. 790x600mm Outletdia. 65mm With jacketcheck With hydraulic liftingcheck Information Mounted on wheelscheck With switchcheck Floorspace2,8x1,5 M Total height2,4 M Weight2400 KG ATEX compatiblecheckDissolversDraisMixers > DissolversBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipp ...

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 A439697 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Used Bottle Sealing Wax Machine Year 2021 Versatility in Bottle Size Handling Firstly the 2021 used sealing wax machine caters to bottles ranging from 0 75 to 5 liters This flexibility allows it to adapt to various product types significantly enhancing operational versatility Advanced Customization Capabilities Moreover customization is a standout feature Manual timers enable fine tuning of wax immersion and cooling phases Additionally a manual thermostat allows for precise adjustment of the wax s temperature These features collectively ensure a superior seal for each bottle Efficiency in Energy Use of the Used Bottle Sealing Wax Machine year 2021 Furthermore the Bottle Sealing Wax Machine specification of 230V power requirement and 1 8 kW consumption underscores its energy efficiency Such specifications indicate not only a low operational cost but also an environmentally friendly approa ...

Doughnut baker with a settling cart. Instead of the usual heating coils, you will find a highly efficient surface heating system at the bottom of the grease pan. In this way, you can bring your fat to the right temperature faster, more efficiently and more evenly with significantly less energy and can keep and control it in a well-dosed manner without overheating the fat. This technique also allows us to have a flatter design that allows you to use 40% less grease and therefore 40% less grease. It is obvious that subsequent cleaning is correspondingly easier. In the easy-to-use control system, you can store your recipes in up to 10 programs and start the automatic program sequence with a simple push of a button.

Used Isobaric Filling Triblock VIMERCATI 28 48 8 Year 2001 Firstly the VIMERCATI 28 48 8 bottling system created in 2001 is notably advanced for the bottling industry especially for isobaric filling This document meticulously offers a comprehensive analysis focusing on its detailed specifications and also covering its application in beverage filling Production Capacity and Versatility Moreover the triblock boasts a capability of processing 8000 bottles per hour BPH It s exceptionally efficient for a variety of PET container formats 0 50 L 1 0 L 1 5 L and 2 L Such unparalleled flexibility meets diverse production needs and adapts to changing market demands seamlessly Rinsing Component of the Filling Triblock Vimercati 28 48 8 Additionally it features 28 grippers for thorough container treatment This essential stage ensures containers are impeccably clean before the filling process It adep ...

General SKU265K274 LocationBarneveld MakeDraiswerke GmbH Mannheim TypeFH-300 S Torrmat No.48510 Year of construction1976 Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Motor9.2 KW Specified Features - Planetary mixer Planetary mixer(1x) 2 Mixing/kneading shaftscheck Motor± 9,2 KW With variable speed drivecheck With covercheck With pan(1x) Capacity300 Ltr Pan sizesdia. 790x600mm Outletdia. 70mm With mechanical liftingSpindelhubwerk Motor± 1,0 KW With vacuum pumpcheck MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information With switchcheck Floor space1,8x1,0 M Total height2,3 M Weight2000 KGPlanetary mixersDraisMixers > Planetary mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

plate thickness: 1,5 mm roll diameter: 76 mm bending speed: 4,7/9,4 m/min total power requirement: 0,37/0,55 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 0,6 x 0,6 m Electric 380 Volt: Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 doughnut bakers with two weaning trolleys. Instead of the usual heating coils, you will find a highly efficient surface heating system at the bottom of the grease pan. In this way, you can bring your fat to the right temperature faster, more efficiently and more evenly with significantly less energy and can keep and control it in a well-dosed manner without overheating the fat. This technique also allows us to have a flatter design that allows you to use 40% less grease and therefore 40% less grease. It is obvious that subsequent cleaning is correspondingly easier. In the easy-to-use control system, you can store your recipes in up to 10 programs and start the automatic program sequence with a simple push of a button.

This ECS is used to separate the non-ferrous metal fraction from other scraps in plastic recycling lines.., It can handle very small parts but even larger ones, up to 400 mm, depending on the model., Metals which will be separated are : copper - alluminium - brass - bronze, Constructed in a workmanlike manner, durable and efficient machines made in Italy, these devices offer excellent performances in any plastic processing line., To get a customized offer, please send us :, - material processed and size, - contamination % and type, - max contaminants size, - throughput rate of the line

Description: Max. lifting capacity: 365 kg Untested / defects mannot be excluded Approx. Onsite Dimension. (l x w x h): 2,400 x 900 x 2,300 mm, weight approx.: 1,880 kg

Description: 7 pieces Consisting of a GÜDDE scroll saw, 2 TCM and ALPHATOOLS circular hand saws, a MANNESMANN jigsaw and other devices For further technical details, see photographed lot signs Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 370 mm, weight approx.: 40 kg

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm no. of strokes: 15 Hub/min cutting angle: 2,0 ° back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm well-maintained / like new condition () New price ~ 45.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back gauge Cutting length control via a ...

Manufacturer: IKA Type: T50 EIS-TURRAX Power: 11,000 watts Speed-controlled: up to 10,000 rpm Swivel in a circular manner LWH: 400 x 400 x 1300 mm

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner

7,020 t/h rated capacity (of loose material) used to store bulk material in stockpiles in a controlled manner; is connected to the infeed conveyor belt via a tripper car; mostly used for intermediate storage of coal, for example in ports or at power plants; mounted on rails; belt width 1800 mm; belt speed 5.24 m/sec; distance from slew center to discharge pulley 23 m; discharge pulley height 8 m total operating weight approx. 150 t

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner

laser power: 5 kW, TLF5000 laser, laser working range: 3000 x 1500 mm, maximum steel thickness: approx. 25 mm, maximum stainless steel thickness: approx. 20 mm, maximum aluminium thickness: approx. 10 mm, laser power control, underlying chip conveyor belt, external cooling-air filter installation, automatic product/plate exchanger "Liftmaster", loading + mobile unloading table, exhaust air ducts, table extraction unit, various spare parts, Please note! The buyer is responsible for the dismantling and removal of this lot, this must be carried out in a professional manner, viewing + collection by appointment! Cross Chips Conveyor Belt + Collection Container Not Included, With Various Accessories

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 450 mm   sheet width min.: 90 mm   sheet thickness max.: 13 mm   sheet thickness min.: 2 mm   exterior coil diameter max.: 1900 mm   exterior coil diameter min.: 1100 mm   internal coil diameter max.: 760 mm   internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 30 mm   external diameter max.: 140 mm   wall thickness min.: 2 mm   wall thickness max.: 12 mm   length min.: 4000 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min   feedstock transport direction: left to right Line consis ...