127,554 used machines on RESALE, but how to find them? Machine Search
MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.
MAN D 2066 LF 11 Shortblock It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
MAN D 2066 LF 57 Short-Block It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
MAN D 0226 MTE fuselage engine, industrial/marine version It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
A Complete Turnkey Solution: ‘FIVES DMS Montbard & SMS MANNESMANN MEER’ 8" Seamless Tube Plant Once known as Vallourec Bearing Tubes Montbard, this facility can produce hot and cold rolled seamless high precision tubes up to 203 mm OD and 2 to 55 mm wall thickness based on a long-established state-of-the-art manufacturing process. Make (main): · FIVES DMS MONTBARD · SMS MANNESMANN MEER Mothballed since: 2025 Capacity: 80,000 tons per year Processed material: CrMo, CrMn alloyed steels Starting material: 80 – 240 mm round billets End products: o Hot Rolled Tubes up to 203 mm OD; 8.0 - 53 mm WT o Cold Rolled Tubes 25 - 102 mm OD; 2.0 - 20 mm WT Consists of: Billet Yard Hot Rolling Mill incl. Furnaces, Piercer, Elongation, Calibration, Sizing mill, Cooling bed (7) Cold Pilger Mills Heat Treatment Furnaces incl. Quenching ...
Working width from to: 140 mm Working height from to: 20,80 mm : endlos mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
6.6 MW MAN THYSSEN Extraction Condensing Steam Turbine Manufacturer: MAN THYSSEN Year of Construction: 1999 Condition: Used – In Good Running Condition Availability: In Stock Technical Data: Rated Power Output: 6.6 MW Voltage: 11 kV Frequency: 50 Hz Steam Inlet Conditions: Pressure: 40 bar Temperature: 440 °C Extraction Performance: 6 MW with 50 t extraction – 65 t/h 6 MW with 16 t extraction – 45 t/h 5 MW with 0 t extraction – 28 t/h Extraction Steam: Pressure: 12 bar Temperature: 294 °C Exhaust Steam: Pressure: 0.25 bar Temperature: 65 °C Description: Well-maintained German manufactured extraction condensing steam turbine suitable for industrial power generation and combined heat and power applications. The unit is designed for continuous operation and is ideal for sugar mills, textile plants, paper mills, chemic ...
Pressure flange for STARTER MAN 40/54 recon MAN part number: 161.01.011
MAN 40/54 recon gas flange MAN part number: 289.07.002
Indexing tube without man 40/54 tap MAN Part Number: 419.01.004
Pressure pipe ground MAN 40/54 recon MAN part number: 434.01.012
Used mozzarella production line. New 2013. The line includes: - Tank for preliminary pressing of cheese curd - LT150 thermizer - Molds for shaping the curd - Chilled water tanks - Brine tanks - Tube heat exchanger for cooling brine Cheese curd plasticizing set consisting of: Tanks for pre-pressing cheese curd with an automatic device for cutting into small portions. The prepared cheese curd is fed into the thermizer for plasticization. The plasticized mass is manually formed into cheese molds. The portions prepared in this way, packed in molds, are cooled in an ice water tank. After cooling, they are removed from the molds and placed in brine tanks. After salting, the mozzarella blocks are sent to a ripening room with specific temperature and humidity parameters.
MAN 9L32/40 complete engine 3 pieces available Each engine 4320 Kw at 720 Rpm Also able to sell crankshaft / spare parts or the cylinder block please contact: info@fin-marine
MAN NR34/S026 Turbocharger 1 new and 3 used available New bearings and repair sets also available in our stock in Istanbul Please contact: info@fin-marine
REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.
used
used
Dear's Sale, used 3 engine MAN 16/24 Layner, piston, conrod ,fuel pomp, air cooler, etc. Brgds Hakan KUSCU +905323642509
TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg
MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine
Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234
Available in stock 1 x Used MAN NR34/S022 Turbocharger. Fully serviced at MAN and ready to be installed. The equipment is used but in good working conditions.
Key data: 18 , 8 , 3
Screw compressor Mannesmann DEMAG SE 30 S 3 m³/min, 8 bar, 18.5 kW Good condition Test run carried out Ready for action
High-quality lattice supports with high load capacities, inexpensive alternative for gratings – Brand new – Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (with a 2.70m trusss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1.05m 1,10 1.20m Other depths on request! Evenly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Lattice grid: 50 x 100 or 25x100mm Please also indicate which beam type (truss type) you have! So whether box profile (or IPE carrier) 50 or 40mm, or whether they have trusses with step. Advantages: no sharp edges 200% safety factor – independent of the shelf beams Bealstable for permissible deflection and structural failure Large selection of standard sizes and load capacities MantaMESH is our market-leading wire me ...
Manesty D3B tablet press Serial: 24D117 Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC -Output: 0-30 volts DC -Dimensions: 150/240/H130 mm -Weight: 4.5 kg
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SUB: FOR SALE... MAN 8L 20 / 27. USED CRANKSHAFTS AT TURKEY HAVE A GDY SIR WE VE 2 PCS USED MAN 8L 20 / 27 CRANKSHAFTS AT OUR STOCK AT TURKEY.. CRANSHAFTS MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item Condition: New as pictured Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg More items - new and used - can be found in our shop! International shipping costs on request!
58 Mw MAN 18V48/60TS power plant 50 Hz 3 x Man 18V48/60TS generators together with auxilary equipments Approx 4000 Working hours each 58 Megawatts total power 19305kw each at 500 RPM and 50 Hz Engines year of build 2014 with ABB AMG1600UU12 DSE Alternators Alternators year of build 2015
1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...
Key data: 630 mm
Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg
ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...
ID2954 Niemeyer manhole finisher year/Year of construction 1996 Manhole finisher, with conveyor belt, vibrator, outlets, wall traverse, filling carriage, manhole inserts (worth approx. 23,500 euros), accessories Shaft ring paver, with feed belt, vibrator, outlets, wall traverse, filling trolley, shaft inserts (worth approx. 23,500 euros), accessories
amount: 1 STK height: 450 mm external diameter: 340 mm Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 70
MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.
Man 12 Cylinder container for sale. Price: Please Apply Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.
Weight: 0.1 tons Power: 0.6 Kw Waterpressure: 3 Bar Length mm: 1600 Width mm: 900 Height mm: 1300 Working height: 90 cm Transport size L x W x H: 2,5 x 1,36 x 1,3 Min.-max glass size: 1,20 x 55 cm Number of spindles: 1 Condition machine : Good Control type: Manual Electric. Connection: 16A 400V Documentation: No Instructions: No Electric diagram: No Parts list: N/a Available software: N/a Photos/film available: Photos and video available
Key data: 220
MAN Lean Burn Biogas 2876 LE302 Containerised Generator. Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2023 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.
MAN 6L23/30 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information
MAN 28/32H spares available: MAN 28/32H 15 pcs cylinder heads with std sized exh seat bores free of cracks and weldings MAN 28/32H pistons 10 pcs std sized ring grooves free of cracks and weldings MAN 28/32H connecting rods 5 pcs free of ovality and cracks MAN 28/32H water jackets 8 pcs From our istanbul stock Please contact us at infofin-marine
maximum number of results exceeded
please refine your search
