man roland r used for sale

DEAR'S SALE, HITACHI MAN 35MCE SPARE PARTS FULL COVER, LINER, PISTON, CONROD, 4CYL CAMSAFT, PIPES, FUELPUMP ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

Dear's Sale, Man B&W K45GF engine spare parts Cover, Liner, piston, conrod, fuel pump etc Brgds info@kscege.com

Dear’s Sale, BMZ Man B&W 6S26MC built 1990 engine spare parts Liner, conrod, piston head, jaket, end rod, filter, turning gear, piston etc…. Best Regards Info@kscege

DEAR'S SALE, COMPLETE MAN B&W 8T23LH4E YOM 1988 720 RPM 850 KW Std cranksaft good condition Brgds Hakan KUSCU +905323642509 info@kscege.com

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

TO WHOM IT MAY CONCERN WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN NR 34S AT OUR STOCK. NEW BEARING BUSH 1151768-0353 517003 1PCS NEW LOCATING BEARING 1151768-0580 517002 1PCS NEW NOOZLK E RING IMO 3318 129.88cm3 1PCS NEW BEARING ASSY 5891812 30021F 8PCS ALL PARTS EX STOCK LOACTED AT IZMIR TURKEY. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

CYLINDER HEADS , BEARINGS MIBA, CONRODS, VALVES INLET & EXHAUST

Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Format: Laying table 480 x 260 mm Embossing head: 260 x 200 mm 2-fold foil puller

Item: Base Module Make: MAN B&W Type: L21/31 PCB: 0580-A & 0042-E Condition: USED Doc Rev: 14.0042.0 Rev 1.6 MBD: 1688285-9 BMI-II

Machine FCS AE-400 Technical data Screw diameter Ø66mm; Injection pressure 1964 Kgf/cm²; Maximum shot volume 1026cm³; Max shot weight 937 gr; Injection rate 1368cm³/sec; Plasticizing rate 240kg/hr; Injection speed 400mm/sec; Screw rotation speed 250rpm; Mould clamping force 4000KN; Ejector stroke 140mm; Mould thickness 200~ 800mm; Suggestion minimum mold dim. (HxV) 450x450mm; Distance between tie bars 710x710mm; Mold platen 1040x1040; Pump driving motor 55,95KW; Heater capacity 33,2KW; machine dimensions (LxWxH) 8500x1950x2350mm; Oil tank capacity 1002Liter; Machine weight -25ton; Machine made 2008y; Produce: FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD, Taiwan.

Item: Base Module Make: MAN B&W Type: L21/31 PCB: 0580-A & 0042-E Condition: USED Doc Rev: 14.0042.0 Rev 1.6 MBD: 1688285-9 BMI-II

Description: Additional information: Filter cartridge/3-5μm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER oil filter element, Mann Filter filter element for oil with the highest quality for wire erosion, sinking erosion and spark erosion drilling. The Mann + Hummel oil filter element H 34 2240/40 KIT reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers optimal protection and is used to filter engine, hydraulic and transmission oil. Technical data: Height: 450 mm External diameter: 340 mm weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 350 x 350 x 490 mm

General SKU005G002 LocationBarneveld MakeMann + Hummel Anlagentechnik Ludwigsburg No.83 605 67 312 Year of constructionunknown Material Rotor materialAluminium Main Features MaterialAluminium Motor0.22 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialAluminium Rotary valvehas never been used (1x) Rotor diameter200mm Rotor width170mm Inletdia. 145mm Installation height360mm With motor0,22 KW, 380 Volt Information Floorspace0,6x0,6 M Total height0,5 M Weight150 KGRotating valvesMann + HummelRotary valves > Rotating valvesBrand > Mann + Hummel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

Execution: unit type: mobile version: Schallgedämmt technical data motor: motor manufacturer: one motor type: D 2842 LE engine power: 424 KW cooling: water-cooled starting: electric 24 V DC speed: 1500 rpm fuel: fuel oil EN 590 Technis Che data generator: generator manufacturer: Ansaldo FKI generator type: M 7B 316 LD 4 generator power: 525 kVA voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: peak-load operation switch: generator switch 3 pin delivery: built tank: execution: double-walled litres: 1,000 dimensions of the unit: width approx. mm: 2350 height mm: 3.260 length mm: 9.230 weight KG: 10,600 use: State: well get built: 1992 delivery: immediately Verl price net in â?¬: on request: hours of operation: 701 location: Verl - Germany

Make: WOLF Type:Climate aggregate Power: 75 kW Refrigerant R407C Volume: for a ventilation system of 12,000 m2/h Built: 1999 2 pcs. compressors Make: Maneurop Complete unit including condenser, collector and switch box. Distributed in two circles of 50/50% each Price 3800,- More information can be found on our abc.frigocom.at page or via e-mail on info@frigocom.at

approx. 500m roller conveyor with accumulating 50 cm wide, powered - used-: Price for 10m from the site: only EUR1.099.-(net), dismantled and loaded! Price for 50m from the site: only EUR4.999.-(net), dismantled and loaded! A total of approx. 500m available (details upon receipt in the camp)! Manufacturer: Mannesmann (Siemens) Dematic AG Type: KR Year of construction: 2001 Motor: SEW Individual lengths: approx. 3 m,. Width: 50cm, Conveyor width: approx. 44 cm, Roller spacing: approx 8 cm. Optional accessories (photocells, scanner etc.) Condition: good Available: available now Location: Camp Bautzen

new! Piston ring set 08-431600-00 108mm x3 + 2.5 + 4mm standard ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Properties: Used roller conveyor from the manufacturer Mannesmann / Dematic Condition: fully functional with traces of usage Ideal for fast material transport Specialist dismantled and packaged Drive: Round belt Incl. SEW motor 0.55 KW Stock 2 pieces Technical data: Dimensions of the roller conveyor Total length: 600mm Total width: 700mm Roll width: 610mm Roll diameter: 50mm Railway consists of 10 rollers Information on the framework Height: 165mm Width: 35mm Roller track The roller conveyor is ideal in the picking zone for interlocking machines or work places and to optimize the internal flow. During transport, the roller conveyor can feed sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and mach ...

Double turbo pulping/refining machine by MANZINI Model: TEF20.E Year: 2000 Overall dimensions: length 2,900mm, width 1,700mm, height 2,400mm

Available in stock 1 x Used Tool for extraction of fire land ring. The tool is used but in good working conditions.

Available in stock 1 x Used Fitting and removing device for cylinder liner. The tool was used for MAN engines. The tool is used but in good working conditions.

Available in stock 1 x Used Fitting and removing device for injectors. The tool was used for MAN engines. Tool in good working conditions.

Industrial robots, robots -Payload: 2 kg -Control: Siemens RCM -Max. Working range: 800 mm -Own weight: 670 kg

Pressure reducing valve, direct-operated, hydraulic valve MANNESMANN REXROTH ZDR 6 DP3-43/75YM 00410865 75 bar lockable ! Dimensions: 250 x 45 x 40 mm

Vane pump, hydraulic pump MANNESMANN REXROTH 1PV 2V3 -30/63 R001 M 0100 A1 ( 1PV2V3-30/63R001M0100A1 ) 40 6633 R06 P27

Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding performance: max. 400 A -Welding cable with electrode clamp -Ground cable -Weight: 340 kg

winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Manufacturer: Manitowoc, crane rope Ø 17 mm -Length: about 250m -Item No.: 03120320 D17 x 250M -Price: complete -also other crane ropes: available -Transport dimension: Ø 700 x 600 mm -Weight: 420 kg

Pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, adapter tube, pipe bend -Manufacturer: Mann, elbow 90° Ø 150 mm -Total dimensions: 360/220/H155 mm -Number: 8x sheets available -Price per piece -Weight: 1.5 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, separating hood compressor, separating hood compressor, cooling unit -Manufacturer: Maneurop, compressor compressor type MTZ32 JF4 -Power: 2.0 kW -Voltage: 380V / 50Hz -Volume flow: 9.3 m³/h -Dimensions: 300/280/H355 mm -Weight: 22 kg

General SKU100T633 LocationBarneveld MakeManesty TypeAccela-Cota Model 48 Year of constructionunknown Main Features MaterialStainless steel Motor2.2 KW Inlet diameter1200 mm Specified Features - Coating pan Coating panSugar & Film Coating Unit (1x) Batch sizemax. 150KG Pan diameter1200mm Cylindrical width500mm In-/Outletdia. 480mm Pan can be tiltedcheck Motor1,5/2,2 KW Pan speed8,5/17 Rpm MaterialStainless steel Information Mounted on framecheck With switchgear(Dim. 0,8x0,4x1,5 M) Floorspace2,2x2,0 M Total height2,1 M Extra Specifications-- RECONDITIONED -- ReconditionedCoating pansManestyReconditionedCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

Welding Rotary Machine Right, left-hand rotation Variable speed Due to slight modification ( front wall partially out separating and attaching a adjustable roller support can also be drilled rods and e.g. cardan shafts Weld. VAT not deductible Please inquire with location and postcode.

Man Roland R204 in a very good condition. 110 mil , format 74x56

Reference Num.: 3021 Brand: MAN Roland Type: Ultra RZU 4 Construction year: 1967 Size: 780 x 1,120 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 475 x 525 mm, max 780 x 1,120 mm Printing speed: max 7,800 sheets/hour Printing units: 2 Machine size: Length: 6,915 mm, Width: 4,090 mm, Height: 2,300 mm Total weight: kg 19,200 / lbs 42,329

FOR SALE NEW UNUSED MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS NEVER USED & MONTAGED . IT WAS STOWED AT WOODEN BOX PLS FIND SPECT AT BELOW. TYPE NR20 / R149 Work No. 7531934 t Mmax 650 C SPEED 44000 rpm YOB 2011 WEIGHT 450KG EX OWNER SUPLIED FROM MAN . MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

sed Manesty Rotapress MK IIA rotary tablet press, 45 station, double sided, with pre-compression, keyed upper punches, With feed hoppers, force feeders, controls and associated parts.

machine measurements: 3200x1700x2100 mm machine weight: -- kg power capacity: -- kW Condition: used Specification: Ultrasonic cleaning system type: Fisa 3VSD 150D - ultrasonic cleaning system consisting of: (see description) 1. tub 1 - cleaning agent 2. tub 2 - tap water 3. tub 3 - preservative 4. cleaning area 5. control - Cleaning cycle in tub 1 approx. 10-20 minutes - Operating temperature between 70-75°C - Extraction ON during cleaning process (Extraction fans are not are not included in the scope of delivery. - Cleaning with water in tub 2 - Cycle time in tub 2 approx. 10-20 minutes - Preservation in tub 3 - Preservation cycle time in tub 3 approx. 10 minutes - Blowing off the parts in the cleaning area under suction - incl. two cleaning baskets - The motors for the suction system in tub 1 and in the cleaning area are not included in the scope of delivery.  ...

Perfector 1/5 and 6/0, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Refrigerator, Auto-Wash, Double Size Impression Cylinders, Roland Mabeg Jet Feeder, Steel Plate on Overlap, High Pile Delivery, Autosize, IR Dryer and UV Dryer, Standard Accessories

1986 4 Color Serial No.: 638 Size: 52x72 cm 55 million Mabeg Feeder Hybrid machine with Eltosch UV Dryer Conventional Damp. Weko T66C under Power Test possible Available: immediately Located: Germany

Ice cube machine good condition, little used

RCI Rolandmatic Dampening Baldwin Cooler Grafix Powder Sprayer Perfecting 2/0 - 1/1 With Standard Equipment Very Good Condition Immediately Available

Manesty Betapress Rotogran oscillating granulator, used but in good condition. Used Rotogran separator with hopper and rotor in stainless steel. The granulator has the task of sifting the powder introduced into the appropriate collection hopper placed at the top. The sieving operation allows to obtain a powder with homogeneous granulometry (the size of which depends on the size of the assembled mesh), which can then be used in the manufacture of tablets. The sieved powder is collected in a special container, a rigid container or a bag, placed under the conveyor. Italian manual included.

: 149207/45 A pressure / power: 10 bar Motor output: 55 kW : 8,2 m³/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filling line, closed and grouped 18 pistons MANZINI-COMACO Description Filling line, closed, grouped and box maker for jugs MANZINI-COMACO The filling-capping unit constitutes a group of automatic operation consisting of: A volumetric filler with 18 product delivery valves, suitable for filling metal or plastic containers, cylindrical or molded, with all kinds of liquid or semi-liquid products, food and non-food. A capper equipped with a rotating head with 6 pistons, suitable for closing, by covering, metal and non-metallic containers, shaped cylindrical or molded. Dimensions of the admitted containers: Diagonal max. mm. 190 Diameter max. mm 173 Height min. mm. fifty Max height mm. 300 Maximum production per hour 4600 E / H Dosing capacity. DC. 5700 Agrupador de garrafas Brand Apsol Type, DFM2 Year 2006 Positioner Robot of bottles Brand Apsol type, RCP 2 Year 2006 Trainer of boxes Mark ...

Discharge pressure: 8bar, suction pressure: 1000mbar, volume flow: 337m³/h, rotational speed: 1475/min, shaft power: 36kW, motor power: 37kW, operational hours counter: 25,438h, with documentation.

Gears, spur gears, angular gears, worm gears -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 8:1 -Dimensions: see photos -Quantity: 2x gears available -Price: per piece, with 1 piece discount, drive wheel damaged see photo -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc.