man roland r used for sale

<br>DECOIL DURCHMESSER: 1000 MM, AUFWICKLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

AGFA Viper 3.04 Software rip consisting of dongle, CDs (original 3.01 and update 3.04), APIS board and APIS adapter Available now

AGFA AccuSet 1500 plus with AGFA OLP and AGFA PDF-Rip for Windows. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

AGFA AccuSet 800 with AGFA Viper Rip. System is completely tested and cleaned. Resolutions: 1200, 1800 and 2400 dpi - the system is complete and includes accuset, supply & recording cassette, APIS cable, CD's, software and dongle. Includes Techkon film densitometer. We will be happy to send you further information and pictures. Available now

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw

Shelving platform approx. 900 m2 1 staircase 1 transfer point Price: in case of self-degradation in the condition as the plant is located at the moment without blocks and shelves. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exch ...

Various Shelf stand approx. 4.00 meters to 6.00 meters Pallet carrier We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other ...

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Offer shelf warehouse from stock: approx. 600 pallet spaces in good condition. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, ot ...

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

screw for PE and PP much more screws (some are new) available

Cat.-Nr. 11-2920 in a very good condition Manufacturer: Raum Measurements: HxD: 3400 x 2200 mm Material: V2A - AISI 304, 1.4301 Surface: inside 2B=IIIC, outside marbled On the top: with Inlet with 2 x Transport Hooks Tank Body: with Sample Valve with Temperature Indicator with Clap with Manhole Lid 450x330 with Connector for Level Indicator with Outlet DN 80 The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

used, kpl. 1 year warranty, plate size 500 x 500 mm, 45 plates, open outlet, 20 mm cake thickness, pressure 15 bar, capacity approx. 171 liters, filter area approx. 18m2, dimensions 3500 x 900 x 1200 mm, weight 1.5 to, optionally with hand pump or motor hydraulics, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, optional 60 - 85 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity 800 - 1100 liters, filter area 64 - 90 m2, dimensions 7000 x 1500 x 2400 mm, weight approx. 11 tons

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

used, kpl. 1 year warranty, plate size 300 x 300 mm, 10 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 20 liters, filter area 1.5 m2, dimensions 1200 x 600 x 600 mm, weight 400 kg, optionally with manual or motor hydraulics, available now

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total power / connected power: 14 kW; 380 V We ...

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

in stainless steel sliders, t-pieces, flanges, etc. Price piece: from EUR 80,00 Pipes available approx. 800m Price /m: from 40,00 by DN 50 - DN 120 various steam control valves Price piece: from EUR 180,00

Gross bagging scale with e = 50 g for open bags with stainless steel double screw feeder 55 - SS (2 x 1.2 kW, for coarse and fine current), one-piece rubber filling nozzle, evaluation unit Speedac 7, pneumatic sack clamp, vent device with 2 vacu probes (swivelling), rietschle vacuum pump and switch cabinet. Air consumption: 30 NL/weighing, amount of aspiration air: 6 m3/min.

Chain excavator Liebherr R941B with sheet wall ram Technically fine Built in 1977

Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...

Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25

small die-head with 60, 80 or 100 mm die-insert, with cooling ring

Reifenhäuser screw with 120 mm diameter, 30 L/D for extruder model RT and / or RH 1651-1-120-30

Ladies and gentlemen, can be offered: A conveyor belt system for conterminized products All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincere ...

Engine in exchange Yanmar Type=3TNE88-ENKR from Kramer wheel loader with warranty immediately available from stock. all prices plus vat. info@miw-zeven.de

2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 10.00 m and 178 baking surface floor 1.00 m and 178 baking square measure floor 78 x 58 cm 2 ofen Totally total area 20.00 m and 178 - 40tins stove is in very good state general and thorough outdated. functions as anew. a very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement with magnetic pumps including. 8 stuck anew stikkenwagen including. 80 stuck rand two rand alubleche sales incl. cargo and assembly on inquiry I also have to sell 2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.7 usable total area 7.00 m and 178 (7 auflage, high shelves) price on inquiry

used lime silo material: Metal

Chamber filter plates PP Polypropylene chamber filter plate -for almost all manufacturers: Rittershaus & Blecher, Passavant, Netzsch, Hoesch, von Roll, Diemme, Filox, Andritz, etc. Cake thicknesses and plate thicknesses are freely selectable depending on the application and filtration conditions. The chamber filter plate made of plastic is characterized by excellent chemical resistance and easy handling due to its low dead weight. - One component - The filter surface consists of a special conical bump structure. This pimpled structure supports the filter cloth and ensures excellent filtration performance for each individual chamber. - Filtratin inputs and filtrate sequences individually according to customer requirements - High plan parallelism, thus flawless sealing in the closed state. Standard formats: 250, 400, 470, 500, 630, 800, 915, 1000, 1067, 1200, 1300, ...

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Membrane filter records Standard welds together the filtration cycle can be shortened by the application of membrane filter records considerably, while the unproductive phase of the pressure filtration is broken off and is substituted with the postpressing. full plastic membrane record with welded together membranes, thereby the easiest Handling and the highest chemical permanence perfect separation of the Nachpressmediums of the filtration product variable material choice membrane corners as ? circle to the membrane movement poor in tension for almost all formats and manufacturers. they need spare parts, accessories, service or servicing for your chamber filter press high-pressure membrane pump or drainage facility? request us. we help you with pleasure.

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Technical data: model: RMH 60 x 40 – T 100 or T - 150 machines dimensions without preloading box / side case box L x B x H / in metres 4.50 x 1.60 x 2.10 loading box dimensions: L x B x T / in cm: 130 x 60 x 61 parcel dimension in cm: 60 x 40 x material amount engine kW / volt: 15 / 400 or 22 / 400 mole lid pressure in T: 50 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T: 100 or 150 ground ram piston rod Durchmesser:220 mm working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 6600 control: by hand the RMH 60 x 40 metal press and scrap metal presses is likewise able to come with lateral hydraulic preloading box are delivered and also with different Press force in the ground ram, 100 metric tons and 150 metric tons.

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 One oven for 20 sheets Total usable area 10.00 m² Baking area per floor 1.00 m² Baking area size per floor 78 x 58 cm 6 oven Total total area 60.00 m² - 120plates Furnace is in very good condition, General and thorough overhaul. Works like new. A very good steam. Secondary circuit for the baking chamber. Turbo equipment. All maagnetic pump incl. Daub thermal oil boiler system with magnetic pump Including. 12 stuck stikkenwagen Sale incl. freight and assembly on request I also have to sell 2st. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 ( 7 editions, high shelves) Price on request

Gearmotor SEW R82DV132S-4 - used - MANUFACTURER´S DATA SEW R82DV132S-4 output: 5,5 kW motor speed: 1430/73U/min tension: 400/690Δ/Y shaft: 50mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com

Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW

technical data: Roller length/width: 745 mm / 5500 mm Roll Dimensions: 600x .113 Roll spacing: different Free-standing

technical data: Roller speed length/width: 4.10 m Roll Dimensions: 550 x 140 Roll spacing: different

more tech. Details on request

technical data: Make: Jansen Type: Jansen - Saw clamp Types No.: HS-NR. 11102 Purpose: suitable for OSS/E/I75 Dimensions: Tensioner 733 mm long

Attachment: Chamber filter press-neuwertig demonstrator Hours of operation: No Design: page Holm led Filter plate format: 250 x 250 mm Number of plates: 8 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: 0.56 m m² Presses contents: approx. 7 dm3 PCB package length: 379,2 mm Filter pressure: 15 PSI Plate transport: manually Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 960 x 400 x 360 mm Weight: 350 kg Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.