128,281 used machines on RESALE, but how to find them? Machine Search
Compressor, compressor screw RefComp NEW,Type: SW1L17000, 127KW Electric, 510m3/h
Manufacturer: Risco Intestinal holding device of the company RISCO: Intestinal holding device type RS 153 for filling machine RS 1040 , RS 4000, RS 4001, RS 5001 Extra accessories: holding rollers, filling tube, mounting kit Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko biala USt-IdNo.: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl
- Engine power 11kW - Control PLC supported, with two-hand safety circuit - Cutting force 2x20to - Cutting speed approx.33 mm/sec - Cutting channel for rolls to be processed by max. roll length approx. 2500mm max. roll diameter approx. 1400mm - Machine weight approx. 4.5to - Tank capacity approx.160litres - Ambient temperature +5°C - Heat dissipation up to 2 kW - Hand guard grille in the area of the control panel and opposite Machine in stock and immediately available More information and price on request
Berstorff Rotocure AUMA 20-S Drum dia: 2000mm Drum width: 2600mm Sandvic Steelbelt Description attached!
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul. All our refurbished blowers are equipped with new bearings and sealing elements.
Very fast running agitator 0.25 KW - 3400 rpm. with aluminium propeller 300 mm Electric motor: Used electric motor 0.25 KW, 3 x 230/400 volts, n = 3,400 rpm, Weight approx. 10 kg. With motor protection plug. Wave: Precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid clutch made of aluminium. Stirring organ: Two-flyer aluminium propeller d = 300 mm.
Gardner Denver/Rietschle CLFEH 251 V with 7.5 KW AC-Motor, 250 m3/h, Final pressure: - 10 mbar, completely overhauled with all wearing parts, 1 year warranty
Rotary vane pressure/vacuum pump from Gardner Denver/Rietschle KTA 80/5 complete with 4.0 KW AC-motor, 50 m3/h, + 1.0 bar pressure, - 0.6 bar vacuum, Heidelberg version with Heidelberg plug, completely overhauled with all wearing parts, 1 year warranty
Circle rotary pump Capacity: 2,0 m3/h Capacity: 2,0 m3/h Pressure 0,8 bar Motor: 1,1 kW - With connections: inlet: DN 40 outlet DN 40 - With chassis mobile with 2 steering and 2 fixed wheels - With cable and CE plug 16A Measurements and Weight: Length: 1100 mm Width: 620 mm Height: 1100 mm Comment: the pump is tested, 100% functions guarantee! On request with an additional variable rate variable speed drive. Connections can be changed at extra cost.
Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.
Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.
Bosch stainless steel rotary piston pumps Ø 30 mm, long version (8 available)
Type: Quadro Relax S Built in 2012 with lifting tipper HK200 Manufacturer: WP Kemper Built: 2012 State: Used
REMONNAY re-cutting machine Type DR8/225 Cutting height 225 mm, 7 stalk adjustment variable with mechanization, S-separation and saddle conveyor Feed roller table with reversing and alignment feeder Extraction device with cross-cut saws with side goods separator and pull-off roller aisle incl. electric control cabinet and control
New. Unused. Adjustable. Dismantled. Inner diameter passage: 155 mm Total height: 190 cm
Axial Coupling Pumps / Radial Piston Pumps / Hydraulic Pumps Rexroth Hydraulics SY2DFE1-20/071-018/00749487+00079937 Rexroth Hydraulics SYDFE-20/071-018/...+00079937 Rexroth Hydraulics SYDFEE-11/71RKB4-10V3CX2M-040 MANNESMANN REXROTH SYDFEE-1X/71RN00-10E3CX2M-002 MANNESMANN REXROTH SYDFEE-10/71RKB4-10E3CX2M-027 BOSCH 0 514 700 543 MOOG Mod D954z8001 /H Type: HZ-R18A1-RKP063KM28R1Z00DS1 MOOG Mod D956Z8001 /H Type: HZ-R18A1-RKP100TM28R1Z00DS1 BOSCH 2 518 217 749 Arburg A10VSO 18 DR/31R-PRA12N00-SO109 MOOG Mod D953Z8001/C Type HZ-R18A1-RKP045KM28R1Z00DS1 Arburg A10VSO 18 DFR1/31R-VRA12KB2-S2761 MOOG D-71034 0 514 600 085 MOOG Mod D953-0053/B D953-2073/A Type: HP-R18B1-RKP045KM28E2Z00DS1 BOSCH 2 518 216 539 (328 314) BRUENINGHAUS HYDROMATIK A10VSO 28 DRG/31R-PPA12K25-SO983 Arburg A10CSO 45 DFR1/31R-PPA12KB2-S1894 MANNESMANN REXROTH SYDFEE-10/45RN00-10V2KXM Rexroth Hydrau ...
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,480 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Pallet rack stand, used Material colour: sendzimir galvanised Frame Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 2,100 mm high 800 mm deep 06x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,295 x 790 x 40 mm Weight | Pcs.: approx. 12.82 kg 04x Light traverse, used Designation: BL 3 Overall length: 1,310 mm Profile dimensions: L 42 x 44 mm Material colour: sendzimir galvanised 20x Freestanding partition walls, used Total depth: 765 mm Total height: 315 mm Usable height: 275 mm Material th ...
RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg
RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg
Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.
Control board for Werner & Pfleiderer Rototherm Stikkenofen Type: RZK 128
Lippelt Rustica Mini angular bun -with 3 cutting rollers -with humidification and seed sprinkle -Year of construction 2000
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 5,270 mm Number of fields per row of shelves: 04 pcs á 1,280 mm Number of levels plus ground level: 06 pcs. The scope of delivery includes: 05x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 24x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 02x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions: 297 x 210 x ...
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 3,960 mm Number of fields per row of shelves: 03 pieces of 1,280 mm each Number of levels plus ground level: 06 pcs. The scope of delivery includes: 04x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 18x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 01x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions: 297 ...
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,650 mm Number of fields per row of shelves: 02 pieces of 1,280 mm each Number of levels plus ground level: 06 pcs. The scope of delivery includes: 03x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 12x shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 01x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions ...
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields per row of shelves: 01 pcs á 1,280 mm Number of levels plus ground level: 06 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 06x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 01x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions: 297 x ...
Rexroth Controller 4WRSE10 MNR: R900950465 for Krauss Maffei for opening/closing
Rexroth controller for Krauss Maffei 4WRSE 6 MNR: R 900913973
Rexroth Controller 4WRKE27W3-500L3X/6EG24 MNR: R900972662 MNR: R900619277 for Krauss Maffei
ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm
CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl
GROVE RT755 rough terrain crane was built in 1980 in Germany by GROVE MANUFACTURING COMPANY. A vehicle designed for lifting and transporting heavy loads performs perfectly in any , even the most unfavourable terrain. The three-section trapezoidal main boom is distinguished by both an impressive lifting capacity of 50 tonnes and a maximum height of up to 34 metres. All steering wheels, on the other hand, give great off-road ability, ensuring efficient movement over a wide variety of terrain, over any distance. The GROVE RT 755 rough terrain crane on offer has a current UDT inspection valid until December 2025. The total weight of the vehicle is 30844 kg. Technical specifications of the GROVE RT755 mobile crane - maximum lifting capacity: 50 t - maximum boom height: 34,14 m - engine: CUMMINS 173 HP - engine type: diesel - 4×4 drive - motor-hours: 4500 h - dimensions (L x W x ...
Memory rotary table, used rotary storage table Manufacturer: RÖSLER Oberflächentechnik GmbH Type: R 1540 ST Table diameter approx. 1500 mm Built: 2003 Total dimensions: approx. 2600 x 2100 x 1000 mm Memory rotary tables are used for storing, buffering, separation and single feeding of rotational symmetrical parts. They are often enrolled in sliding grinding systems. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
CONICAL ROUNDER, Sind GT Dimensions: 950x950x1520mm Electrical power: 1.1kW
This is a leveling kit with wheels, for movable Combi-Duo from the manufacturer Rational. The levelling kit is suitable for the Rational combi steamers of the iCombi series size 6-1/1 and 10-1/1. RRP: 333,90 € The price quoted is gross incl. 19% VAT. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. OUR USED EQUIPMENT SERVICE FOR YOU High-quality brand-name appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after the purchase Provision of operating instructions, connection diagrams and spare parts Testing according to ...
Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 2,150 mm Number of fields per row of shelves: 02 pcs. Number of grating shelves: 05 pcs. The scope of delivery includes: 03x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates, cover caps and Schottsteg The stands are pre-assembled 2,000 mm high 835 mm deep 10x grating floor, new Material colour: sendzimir galvanised Total width: approx. 1,000 mm Total depth: approx. 800 mm Frame profile size: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Beams (03 pieces): 750 x 18 mm Weight|pcs.: approx. 5.14 kg Max. load per floor 200 kg, with the same weight. Distributed load 06x Compensation plates, new Dimensions: 76 x 58 x 2 m ...
Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...
Mechanical/mechanical clamping system with force transmission, manually operated: mechanical/hydraulic clamping system · Deformation-resistant design for very high clamping accuracy · for use on machining centers with high quality and production performance · Drive spindle with clamping force presetting · grease fittings on both sides for lubricating all guides subject to wear and the spindle thread · Mounting thread M12 for workpiece stop · Stable chip protection prevents chips from penetrating the interior of the body · all guides hardened and ground · Height measurement of base body/workpiece support -0.02 · important for paired use · Supplied with step jaws reversible, hardened and ground. Other technical features: · Version: Model RKE - 3-sided clamping option · Can be clamped horizontally, vertically or laterally - Base body made of steel - hardened and ground - with fo ...
Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 4,100 mm Number of fields per row of shelves: 03 pcs. Number of grating shelves: 05 pieces per field The scope of delivery includes: 04x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates, cover caps and Schottsteg The stands are pre-assembled 2,000 mm high 835 mm deep 15x grating floor, new Material colour: sendzimir galvanised Total width: approx. 1,300 mm Total depth: approx. 800 mm Frame profile size: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Beams (03 pieces): 750 x 18 mm Weight|pcs.: approx. 6.62 kg Max. load per floor 200 kg, with the same weight. Distributed load 08x Compensating plates, new Dimensions: 7 ...
Rubbed machine Sumbel Regent 650; good condition; Working width 650mm; Material thickness 0-30mm. Down pressing machine Sumbel Regent 650; good condition; working width 650mm; thikness from 0-30mm.
TECHNICAL DATA: 04 roller conveyors mm: 1900 x 6000 01 roller conveyor mm: 3000 x 1200
Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m
For sale is a large quantity of transport ball, ball rolls. Application for tables or conveyors Condition new Ball diameter 15.875mm Price per piece 1€ Net plus shipping min. order quantity: 50 pieces If you have any questions, please contact us
For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.
1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,
maximum number of results exceeded
please refine your search
