man kw used for sale

CYLINDER HEADS , BEARINGS MIBA, CONRODS, VALVES INLET & EXHAUST

DEAR'S SALE, HITACHI MAN 35MCE SPARE PARTS FULL COVER, LINER, PISTON, CONROD, 4CYL CAMSAFT, PIPES, FUELPUMP ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

Dear's Sale, Man B&W K45GF engine spare parts Cover, Liner, piston, conrod, fuel pump etc Brgds info@kscege.com

Dear’s Sale, BMZ Man B&W 6S26MC built 1990 engine spare parts Liner, conrod, piston head, jaket, end rod, filter, turning gear, piston etc…. Best Regards Info@kscege

DEAR'S SALE, COMPLETE MAN B&W 8T23LH4E YOM 1988 720 RPM 850 KW Std cranksaft good condition Brgds Hakan KUSCU +905323642509 info@kscege.com

TO WHOM IT MAY CONCERN WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN NR 34S AT OUR STOCK. NEW BEARING BUSH 1151768-0353 517003 1PCS NEW LOCATING BEARING 1151768-0580 517002 1PCS NEW NOOZLK E RING IMO 3318 129.88cm3 1PCS NEW BEARING ASSY 5891812 30021F 8PCS ALL PARTS EX STOCK LOACTED AT IZMIR TURKEY. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Item: Base Module Make: MAN B&W Type: L21/31 PCB: 0580-A & 0042-E Condition: USED Doc Rev: 14.0042.0 Rev 1.6 MBD: 1688285-9 BMI-II

Item: Base Module Make: MAN B&W Type: L21/31 PCB: 0580-A & 0042-E Condition: USED Doc Rev: 14.0042.0 Rev 1.6 MBD: 1688285-9 BMI-II

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Format: Laying table 480 x 260 mm Embossing head: 260 x 200 mm 2-fold foil puller

Machine FCS AE-400 Technical data Screw diameter Ø66mm; Injection pressure 1964 Kgf/cm²; Maximum shot volume 1026cm³; Max shot weight 937 gr; Injection rate 1368cm³/sec; Plasticizing rate 240kg/hr; Injection speed 400mm/sec; Screw rotation speed 250rpm; Mould clamping force 4000KN; Ejector stroke 140mm; Mould thickness 200~ 800mm; Suggestion minimum mold dim. (HxV) 450x450mm; Distance between tie bars 710x710mm; Mold platen 1040x1040; Pump driving motor 55,95KW; Heater capacity 33,2KW; machine dimensions (LxWxH) 8500x1950x2350mm; Oil tank capacity 1002Liter; Machine weight -25ton; Machine made 2008y; Produce: FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD, Taiwan.

Description: Pantograph milling cutter heavy body structure attachment 12 mm diameter 12 mm working dimension 25 mm with PCD plates height 3 mm z 3+3 speed 13-18 m/min New item on order From payment it takes approx. 15 days for pickup Approx. Onsite Dimension. (l x w x h): 150 x 150 x 100 mm, weight approx.: 2 kg

Description: Additional information: Filter cartridge/3-5μm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER oil filter element, Mann Filter filter element for oil with the highest quality for wire erosion, sinking erosion and spark erosion drilling. The Mann + Hummel oil filter element H 34 2240/40 KIT reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers optimal protection and is used to filter engine, hydraulic and transmission oil. Technical data: Height: 450 mm External diameter: 340 mm weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 350 x 350 x 490 mm

MAN D2866LF new crankshafts STD measure Special prices info@miw-zeven.de

Dough forming machine for small pastries MANOTRAD - manually operated - without electrics - mobile - optional with tin cart

SUB: FOR SALE... NEW & RECON ORIGINAL PARTS L 48/60 AT STOCK HAVE A GDY SIR; WE'VE MANY NEW OR RECON SPARE PARTS OF MAN L 48/60 AT OUR STOCK. PLS FIND DTLS AT BELOW. MOST OF THEM SUPLIED FROM YOU IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. 1 NEW CYLINDER LINER X 1105003-7519 1 YOU 2 RECON EXHAUST VALVE 1140441 D 449216 1 3 RECON EXHAUST VALVE 11408100120560 1 5 RECON EXHAUST VALVE 114071002050560 1 6 RECON EXHAUST VALVE 1140441144 1 7 RECON EXHAUST VALVE 114071000960560 1 8 RECON EXHAUST VALVE 114061002560560 1 9 RECON EXHAUST VALVE 114091003053060 1 10 RECON EXHAUST VALVE 114071009960560 1 11 RECON EXHAUST VALVE 114091000500560 1 12 RECON EXHAUST VALVE 114071000950560 1 13 RECON EXHAUST VALVE 11406102640560 1 14 RECON EXHAUST VALVE 11408100120560 1 15 RECON EXHAUST VALVE 61953016796 1 16 RECON EXHAUST VALVE 6051953004859 1 17 RECON INLET VALVE 01 ...

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer: MAN Augsburg, Germany Manufa ...

MAN 28/32H spares available: MAN 28/32H 15 pcs cylinder heads with std sized exh seat bores free of cracks and weldings MAN 28/32H pistons 10 pcs std sized ring grooves free of cracks and weldings MAN 28/32H connecting rods 5 pcs free of ovality and cracks MAN 28/32H water jackets 8 pcs From our istanbul stock Please contact us at infofin-marine

MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...

MAN Lean Burn Biogas 2876 LE302 Containerised Generator Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2023 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty. Price: Please apply

FOR SALE FULL OVERHAULED COMPLETE GENUINE CYLINDER HEADS MAN L 48/60 TO WHOM IT MAY CONCERN; WE'VE 2 PCS FULL OVERHAULED AND TESTED GEUINE CYLINDER HEADS OF MAN L 48/60 AT OUR STOCK. HEADS ARE READY TO USE. WITH ISSUED SERVICE REPORT. SERIAL NO.: IMO 0759-1135070 / B7 - O1224 CYLINDER HEADS LOCATED IZMIR TURKEY. READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. PS WE VE 2 PCS MORE UNOVERHAULED COMPLETE CYLINDER HEADS AT OUR STOCK WE VE ADDATIONALY MAJOR PARTS OF MAN L 48/60 AT OUR STOCK. NEW CYLINDER LINER USED CON RODS USED PISTONS TURNING GEAR ETC... Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

The offer refers to the whole team. The MAN is as good as new and has only run 2093 kilometres. Net price: € 110.000,00. Manufacturer: MAN Model: TGL 8.250 Vehicle type: Truck box / suction-pressure vehicle Chassis number: WMAN12ZZ3LY404807 First registration: 07.04.2021 Next general inspection: 04.22 Mileage: 2,093 Displacement: 6,871 cc KW / HP: 184 / 250 Drive type: Diesel Euro6c Transmission type: Automatic Empty weight: 5,260 kg Permissible total weight: 7,490 kg Dimensions H / W / L: 3.35 m / 2.55 m / 6.15 m Equipment: Roller shutter / side doors / trailer hitch Maul / Air conditioning / navigation The offer refers to the whole team. The MAN is as good as new and has only run 2093 kilometres. The tank trailer has a capacity of approx. 10,500 litres with 3 chambers and is approved according to GGVSEB/ADR Class 3, packaging group III, tank coding LGBF and  ...

FOR SALE NEW UNUSED MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS NEVER USED & MONTAGED . IT WAS STOWED AT WOODEN BOX PLS FIND SPECT AT BELOW. TYPE NR20 / R149 Work No. 7531934 t Mmax 650 C SPEED 44000 rpm YOB 2011 WEIGHT 450KG EX OWNER SUPLIED FROM MAN . MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Key data: 85

Make and Model: MAN E2866E - REBUILT This MAN E2866E engine has been fully rebuilt with genuine MAN heads. Year: 1997 Hours: 50,000 kW: 85 Fuel: Natural Gas Hz: 50 V: 415 Scope of supply: Engine, Alternator, Control panel (Comap), Exhaust Gas Heat Exchanger, Water pump, Canopy with new foam sound attenuationand internal mesh. Service details: Exhaust Gas Heat exchanger cleaned and new insulation fitted. New Plate heat exchanger fitted. New Canopy Fan installed. Engine water pump overhauled and new seal fitted. Control system fitted with Comap control all passwords available. Unit fully cleaned & sprayed. Canopy fitted with new foam sound attenuation and internal mesh. New GAC governor & Actuator fitted. Electronic Ignition fitted. New canopy light fitted. Skid rewired with new temperature & pressure probes fitted. New condensate drain and trap fitted. New  ...

Ingersoll Rand Man Rider Winch available for sale. Make: Ingersoll Rand Man Rider winch Model Number: FA51-MR24MK1G/06144 Serial Number: A015878 Year: 2010 Man Lift SWL: 6875 lb at 75 fpm at top layer Utility SWL: 11000 lb at 54 fpm at top layer Press: 90psig FLOW: 700 ROPE DIA: 3/4INCH Drum Size in: 15 Barrel Dia: 27 Flange Dia: 24Lgth

Net price: 14.500,- € gross price: €17,255 - - - - - MAN emergency generator set 300kVA in 20 ft. Container - - - - - Engine: - Manufacturer: MAN - Model: D2542 MTE - 12 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: CAT / Olympian - 300 kVA - 230 / 400 volts - 50 Hertz - - - - - Start unit / control panel: - Ignition lock for starting - Oil pressure indicator - Water temperature display - Generator monitoring: volts, amps, hertz, hydrocarbons - - - - - Condition: -Used - A test run was made - The engine starts well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - MAN generator set 300 kVA - with soundproofed 20 ft. Container - with starter unit -Switchboard - large exhaust / silencer - - - - - Transport: - A Germany-wide transport is possible  ...

Complete MAN E3262 LE202 Natural Gas container set Make and Model: MAN E3262 LE202 Fuel: Natural Gas/Biogas Year: 2020 Man Block / 2016 Container and ancillaries Hours: 0 Capacity kW: 530 HZ: 50 Voltage:400 Scope of supply: Complete container generating set including - Engine, Alternator, Control panel (ComAp), Container, Exhaust gas heat exchanger, Gas Blower, Radiator and Gas line.

MAN 2876 220kW electrical Diesel / vegetable oil, animal fats Extras: Parallel operation Cooling water heat exchanger Automatic oil refill Monitoring of single cylinder Vorgerüstet 55 dBA at 7m district 800 gallon tank 590 Hours of operation -IT MAN 2876 impact 220kW Olio / grassi animali diesel / vegetale extra: Used in parallelo Monitoraggio monocilindrico Preparata 55 dBA a raggio 7m 800 l Serbatoio Overpressure scambiatore di calore acqua Olio di ricarica 590 ore di esercizio

SUB: FOR SALE... MITSUI MAN B & W 6L 60MCE NEW MAJOR PARTS . HAVE A GDY SIR; WE VE NEW UNUSED MAJOR PARTS OF MITSUI-MAN B & W 6L 60MCE ENGINE. PLS FIND LIST AT BELOW. IF YOU'VE ANY FURTHWER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. ALL PARTS READY TO INPSECT AND TRANSPORT. NEW CYLINDER LINER 2 NEW PISTON HEAD 1 NEW WATER JACKET 1 RECON FULL CYLINDER HEAD 1 NEW INJECTOR ATOMIZER 3 NEW SCRAPER RING 332C F/G 4 NEW SEALING RING PACK 332C / C 2 NEW SPREADER RING 332 CE 8 NEW STUFFING BOX O-RING 3 NEW PISTON ROD O-RING 12 PISTON STOPPER 332B 14 Capt. Ayhan Ugurluba Best Regards ; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE: MAN BW HOLEBY 5L 23/30H STANDART MEASURMENT USED CRANK SHAFT TO WHOM IT MAY CONCERN; WE VE USED MEASURED AND TESTED WITH REPORTED STANDART SIZE CRANK SHAFT OF MAN BW 5 L 23/30H AT OUR STOCK. IT IS READY TO DELIVER . WE VE TEST REPORT. CRANK SHAFT IS STANDARD SIZE AND NO CRACK. READY TO USE. CRANK SHAFT 1994 MODEL AND CLASSED WITH DNV / GL / LR IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best of Regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE COMPLETE MAIN ENGINE MAN BRONS 12V 25/30 HAVE A GDY SIR; WE VE COMPLETE BRONS MAN 12V 25/30 ENGINE AT OUR STOCK. THIS ENGINE EQUAL AS SULZER 12 ASV 25/30 ENGINE ENGINES ARE IN VERY GOOD RUNNING CONDATION. WE VE SO MANY NEW GENUINE SPARE PARTS AT OUR STOCK. ENGINES ARE READY TO LOAD ON TRUCK. PLS FIND SPEC OF ENGINES AT BELOW 2400Kw 900 RPM 1984 YOB 20604/1045147 SERIAL NO. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Best regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

MAN 2842 LE322 gas engine (biogas) 370KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2848 250KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

HAVE A GOOD DAY SIR. WE VE NEW UNUSED. MITSUI MAN NA 57 TO 725 P IT STOWED AT FABRIQ WOODEN BOX. IT WILL NEVER MOUNTED AND USED. PLS FIND SPEC AT BELOW. READY TO TRANSPORT. EX STOCK. MITSUI MAN: NA 57 TO 725 P NO.: 2430 SPEC AD: 490 A4K : 404.3 REVOLUTION: 15000 RPM MAX TEMP: 600 C IF YOU'VE ANY FURTHER QUESTIONS PLS DO EMERGENCY HESITATE TO CONTACT WITH US. READY TO TRANSPORT. EX STOCK. Capt. Ayhan Ugurluba Best Regards ; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

We heve some pnew parts in stock for STX MAN , Wartsila W32, HYUNDAI, MAN TURBO central control, Caterpillar

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

2 x 3.6MW 60Hz MAN 18V28/32H Power Plant for sale At a time when the world is suffering from a shortage of power generation capacity, we are very pleased to inform you that we have a nice 7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil /  ...

TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED GENUINE CYLINDER HEADS OF MAN PIELSTICK 2.3 AT OUR STOCK PART NO : 9439367 010 FOR YR GUIDENCE WE VE OTHER NEW AND RECON SPARE PARTS OF THIS ENGINE TYPE NEW PISTONS / RECON CYLINDER HEADS / CYL LINERS / MAIN BEARING SHEELS PISTON RINGS ETC ETC FOR YR GUIDENCE SOME OF THIS PARTS FIT FOR MAN PIELSTICK 2.2 & 2.5 EX STOCK . READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.

MAN D 2066 LF 11 Shortblock It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MAN D 2066 LF 57 Short-Block It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MAN D 0226 MTE fuselage engine, industrial/marine version It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Pressure flange for STARTER MAN 40/54 recon MAN part number: 161.01.011

MAN 40/54 recon gas flange MAN part number: 289.07.002