man gas generator used for sale

Key data: 1980 KW, 2111 kVA, 690 V

Surplus/Never Used/Never Installed Power Plant Four (4) MAN-Hyundai 6L27/38 1,980 kW (each ), 690v. 60 Hz. 720 RPM, Six (6) Wartsila 9L20, 1600 kW (each) 450v. 60 Hz. 900 RP and Six (6) Wartsila 6L20, 875 kW, 450v. 60 Hz. 900 RPM Marine -Diesel Generator Sets Complete HFO-Diesel 22.7 MW Power Plant with all their respective auxiliaries and BOP, 450v./690v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2008 and 2012.

As good as new Bj. 1980

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

AT- Cylinder heads complete with valves in exchange for DB OM 401-444LA,MAN D2866-2V,D2566MF-2V,DEUTZ FL912,FL913,BFL913 info@miw-zeven.de

MAN D2866LF new crankshafts STD measure Special prices info@miw-zeven.de

Manifold System Satorius with 3 stainless steal funnel (100ml) for microbiological research

We can also repair your engine cheaply and according to your needs with full warranty. Mail=info@miw-zeven.de

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

<br><br><br>Still in operation: Yes<br>Available: immediately

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

size 59 x 74 cm Perfecting 8/0 - 4/4 Color-Pilot-Plus ink control system AIR Center (Rietschle) Technotrans temperation Technotrans combi cooling device with external condensator washing device for printing cylinder Quickstart Low Coverage stabilisation Powder (Hitronic) Inline Observer Optiprint Jackets preparation for colour temperation Non Stop semiautomat delivery Still in operation: Yes Available: sofort

Liners Wear less than 0.05

Cylinder head Exchange

Cylinder head Exchange

IPS: AOT-1; DI-1C; BA-1C; BA-2; MCU-5; CNT-2D; IBI-1; AIO-1; BA-3C; CNT-2; IBG-1; DO-1C; DIO-1C; DIO-3; PPS-BA1; IDS-2 measurement module Metronic Partly unopened original packaging and much more

Cylinder head Exchange

Injection pump in Exchange

Cylinder head Exchange

Bushing obsolete, recon

Turbocharger - recon

Outdated MAN E2876LE302 bio gas engine in Exchange.

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

Make: WOLF Type:Climate aggregate Power: 75 kW Refrigerant R407C Volume: for a ventilation system of 12,000 m2/h Built: 1999 2 pcs. compressors Make: Maneurop Complete unit including condenser, collector and switch box. Distributed in two circles of 50/50% each Price 3800,- More information can be found on our abc.frigocom.at page or via e-mail on info@frigocom.at

FOR SALE COMPLETE MAIN ENGINE MAN BRONS 12V 25/30 HAVE A GDY SIR; WE VE COMPLETE BRONS MAN 12V 25/30 ENGINE AT OUR STOCK. THIS ENGINE EQUAL AS SULZER 12 ASV 25/30 ENGINE ENGINES ARE IN VERY GOOD RUNNING CONDATION. WE VE SO MANY NEW GENUINE SPARE PARTS AT OUR STOCK. ENGINES ARE READY TO LOAD ON TRUCK. PLS FIND SPEC OF ENGINES AT BELOW 2400Kw 900 RPM 1984 YOB 20604/1045147 SERIAL NO. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Best regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned

Key data: 420 , 525 , 400

Execution: unit type: mobile version: Schallgedämmt technical data motor: motor manufacturer: one motor type: D 2842 LE engine power: 424 KW cooling: water-cooled starting: electric 24 V DC speed: 1500 rpm fuel: fuel oil EN 590 Technis Che data generator: generator manufacturer: Ansaldo FKI generator type: M 7B 316 LD 4 generator power: 525 kVA voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: peak-load operation switch: generator switch 3 pin delivery: built tank: execution: double-walled litres: 1,000 dimensions of the unit: width approx. mm: 2350 height mm: 3.260 length mm: 9.230 weight KG: 10,600 use: State: well get built: 1992 delivery: immediately Verl price net in â?¬: on request: hours of operation: 701 location: Verl - Germany

MAN D 2066 LF 31 - Euro 4-324 KW - 440 HP Motor was cpl. repaired according to RAL GZ-797: with new cylinder liners, Pistons, bearings, turbochargers, air compressor, injectors, high pressure pump - without starter, alternator and clutch Repair enabled old part must be returned. Maximum mortgage of old part of 4.000,00 = €

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Motor was sealed front and rear new - upgraded oil pump, thermostat, oil filter, fuel - engine was installed on engine test bench and a cpl. Test run was carried out 6 months warranty on the motor mechanism Mileage only 200,000 km old part pledge 4,500.00 = €

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

MAN D 2876 LF 13 - Euro 4-390 KW - 530 HP Motor was cpl. repaired according to RAL GZ-797: with new pistons and liners, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Bauglieches old part must be returned

In good condition

MAN D 2866 LUH 24

The offer refers to the whole team. The MAN is as good as new and has only run 2093 kilometres. Net price: € 110.000,00. Manufacturer: MAN Model: TGL 8.250 Vehicle type: Truck box / suction-pressure vehicle Chassis number: WMAN12ZZ3LY404807 First registration: 07.04.2021 Next general inspection: 04.22 Mileage: 2,093 Displacement: 6,871 cc KW / HP: 184 / 250 Drive type: Diesel Euro6c Transmission type: Automatic Empty weight: 5,260 kg Permissible total weight: 7,490 kg Dimensions H / W / L: 3.35 m / 2.55 m / 6.15 m Equipment: Roller shutter / side doors / trailer hitch Maul / Air conditioning / navigation The offer refers to the whole team. The MAN is as good as new and has only run 2093 kilometres. The tank trailer has a capacity of approx. 10,500 litres with 3 chambers and is approved according to GGVSEB/ADR Class 3, packaging group III, tank coding LGBF and  ...

approx. 500m roller conveyor with accumulating 50 cm wide, powered - used-: Price for 10m from the site: only EUR1.099.-(net), dismantled and loaded! Price for 50m from the site: only EUR4.999.-(net), dismantled and loaded! A total of approx. 500m available (details upon receipt in the camp)! Manufacturer: Mannesmann (Siemens) Dematic AG Type: KR Year of construction: 2001 Motor: SEW Individual lengths: approx. 3 m,. Width: 50cm, Conveyor width: approx. 44 cm, Roller spacing: approx 8 cm. Optional accessories (photocells, scanner etc.) Condition: good Available: available now Location: Camp Bautzen

DEAR'S SALE, ALPHA MAN L&V 28/32 COMPLETE ENGINE & SPARE PARTS 12V CRANKSAFT STD 6L CRANKSAFT STD LINER, PISTON, FULL COVER, CONROD... ANY PARTS Brgds info@kscege.com

Dear's Sale, Man B&W 16/24 spare parts; Full cover, liner, pumps, conrod, crank&block(5cyl) piston, etc Best Regards info@kscege.com

Dear's Sale, Man B&W 40/45 engine parts Piston head full.. 2 pcs Liner 2 pcs valves etc Ready for transport Best Regards Hakan KUSCU info@kscege.com

Load capacity: 2500 kg

Manitou 170 AETJL aerial work platform with 16.90 m working height The 170 AETJ-L aerial platform makes it easy to reach the most remote work areas. Equipped with an articulated structure, this model is characterized by an exceptional offset and overhang to be able to work at different heights and in different places without having to move the machine. Take advantage of the flexibility of its hydraulic movements for precise positioning in the work area! With its perforated platform floor, inclination detectors and load sensors, cylinder valves and negative braking system, the 170 AETJ-L aerial work platform allows you to carry out your work safely. This machine complies with: European Directives: 2006/42/EC - Machinery (recast EN 280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low Voltage) Make: Manitou Type: Articulated telescopic platform Type: 170 AETJ Year of construction: 20 ...