man chp used for sale

Manufacturer: COMUNA-Metall Year of Manufacture: 2008 Gas type: Category 12HL Connection pressure: 20-50 mbar Nominal power range: 150/195 kW Voltage: 230/400V, 3-phase, 50Hz Fuse: NH 00, 100A Permissible operating pressure: 6 bar Thermal power: 100 kW Electrical power: 50 kW Protection class: IP 54 Permissible operating temperature: 90/70°C Find more here - / Contact us at -

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - / Contact us at -

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

Key data: 1600 KW, 400 V

CHP Power Plant 800 kWe with 2 × MWM TCG 2016V08 Gas Gensets Combined Heat and Power (CHP) plant with 800 kWe / 400 V / 50 Hz output, designed to operate on natural gas or biogas. The plant was originally delivered by MWM in 2011 and remained in operation until 2021. It has low operating hours and is in good technical condition. Thermal energy is recovered as hot water at 90°C, currently utilized for district heating. Due to limited biogas availability, the plant typically ran at 30–40% load and not in continuous 24/7 operation. The facility includes a complete gas treatment and mixing system to handle landfill gas with a methane content of 40–55% CH₄. The power generators are housed in two soundproof containers, while the TEAM Evo MWM power plant control system, electrical switchgear, and control cabinets are installed in a separate control room. The heat recovery syste ...

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

2 identical water-to-water heat pumps. Manufacturer: Thermo-Tec Type: TT-CHP W/W 170.2-S Heating capacity: 207 kW Refrigerant: R290 - Propane Year: 2024 Can be operated with groundwater/well water or via geothermal probes. Heat pumps can only heat. Commissioning: September 2024 Decommissioning: May 2025 In the meantime, it has been professionally dismantled, stored and immediately available. Subject to prior sale - errors possible Internal reference number: E-1208

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

- Max. nominal thickness 40 mm - Max. recommended thickness 20 mm - Max. bevel length in several runs 18 mm - Max. bevel length in single run 12 mm - MIn. bevel inner diameter 100 mm   - X Bevel - K Bevel - V Bevel - Y Bevel - High average cutters lifespan around 1000 M - Self feed - Zero maintenace

- Max. nominal thickness 40 mm - Max. recommended thickness 20 mm - Max. bevel length in several runs 18 mm - Max. bevel length in single run 12 mm - MIn. bevel inner diameter 100 mm   - X Bevel - K Bevel - V Bevel - Y Bevel - High average cutters lifespan around 1000 M - Self feed - Zero maintenace -  

General SKU213T152 MakeAlfa Laval LocationBarneveld CEcheck TypeCHPX510TGD-15CGRX Main Features MaterialStainless steel Capacity20000 Ltr./Hr. Motor18 KW Specified Features - Separator Separatorcheck Capacity20000 Ltr./h Suitable formax. 1100 kg/m3 Motor18 kW, 400 volt (Ex) Max. rotor speed6240 rpm Mounted on stainl. steel platecheck MaterialStainless steel Information No.4131842 Year of construction2005 Mounted on mild steel platecheck Floorspace1,5x0,8 m Total height1,8 m Weight1840 kg ATEX compatiblecheck Extra SpecificationsInside drum diameter: 438 mm Proces temp.: 0/100 °C. Seperator tooling in box Max 60 discharges of solids per hour, 6-8 ltr discharge volume. SeparatorsAlfa LavalCentrifuges > SeparatorsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A. Diameter of the impellor: 180 mm. Connections on the inlet: 70 mm. Connections on the outlet: 60 mm. Estimated capacity: ± 20.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A, Estimated capacity: ± 20 m3/h

Manufacturer: MAN Model: E2848 LER 322 Year of Commissioning: 2015 Power output: approx. 250 kW Find more here - / Contact us at -

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

DEAR'S SALE, HITACHI MAN 35MCE SPARE PARTS FULL COVER, LINER, PISTON, CONROD, 4CYL CAMSAFT, PIPES, FUELPUMP ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

Te Koop: Manifold Tuchenhagen Mixproof valve. 83-85 mm en 2 aansluitingen.

Te Coop: Manifold Tuchenhagen Mixproof valve. 83-85 en 3 aansluitingen

Te Koop: Manifold Tuchenhagen Mixproof. 83-85 mm en 4 aansluitingen.

Te Koop: Manifold Ros Mixproof valve. aansluitingen 2 duims en 3, 2 pieces in een set gel branch.

Te Koop: Ros manifold Mixproof valve. 70 mm en aansluitingen, 4 3 pieces in een set gel branch.

Te Koop: Manifpld Scanio flow equipment. Mixproof valve. Type SN, 1.5 duims en 2 aansluitingen 38 12A.

Te Koop: Manifold Scanio flow equipment. Mixproof valve. Type: 2.5 duims en 2 aansluitingen.

Te Koop: Koltek manifold: Three-way valve met air motor. Type 50 DH-53 2 duims met 3 aansluitingen.

Dear's Sale, Man B&W K45GF engine spare parts Cover, Liner, piston, conrod, fuel pump etc Brgds info@kscege.com

Dear’s Sale, BMZ Man B&W 6S26MC built 1990 engine spare parts Liner, conrod, piston head, jaket, end rod, filter, turning gear, piston etc…. Best Regards Info@kscege

DEAR'S SALE, COMPLETE MAN B&W 8T23LH4E YOM 1988 720 RPM 850 KW Std cranksaft good condition Brgds Hakan KUSCU +905323642509 info@kscege.com

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Exhaust manifold MAN D 2842

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

TO WHOM IT MAY CONCERN WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN NR 34S AT OUR STOCK. NEW BEARING BUSH 1151768-0353 517003 1PCS NEW LOCATING BEARING 1151768-0580 517002 1PCS NEW NOOZLK E RING IMO 3318 129.88cm3 1PCS NEW BEARING ASSY 5891812 30021F 8PCS ALL PARTS EX STOCK LOACTED AT IZMIR TURKEY. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Manifold GEA TUCHENHAGEN Mixproof-valves - Flushing - Balanced Valve top type: TM15N2B0M/66 DN25 NL = 8x DN25 KWIK = 3x DN 65 = 2x DN 80 = 27x Please contact u for more information

BIG Genie Terex adapter suitable for Manitou mount, - New product, - Year of manufacture: 2025, - Weight: ~ 150 kg, Many other adapters available for a wide variety of mounts !

Pallet fork 120cm, - with Manitou pick-up, - 3.5 tons

Manual spindle press, - Maximum filling height: approx. 90 cm, - Pressing area: 102 x 72 cm, Maximum fill level: approx. 90 cm, Pressure area: 102 x 72 cm

Forklift hydraulic/manual operations, max load wight 600 kg

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Liners Wear less than 0.05

AT- Cylinder heads complete with valves in exchange for DB OM 401-444LA,MAN D2866-2V,D2566MF-2V,DEUTZ FL912,FL913,BFL913 info@miw-zeven.de

MAN D2866LF new crankshafts STD measure Special prices info@miw-zeven.de

Cylinder head Exchange

Manifold System Satorius with 3 stainless steal funnel (100ml) for microbiological research

We can also repair your engine cheaply and according to your needs with full warranty. Mail=info@miw-zeven.de

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,