137,648 used machines on RESALE, but how to find them? Machine Search
Pocket filter with 15 m2 filter area, cleaning via vibrating motor with 0.25 kW. Designed as a silo attachment or vent filter for overpressure silos, including many new parts. Can be retrofitted with exhaust fan (0.75 - 2.2 kW), stand feet and dust collection tank to stand filter / add-on filter.
Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 495/403 mm -Height: 20 mm -Hole circle: Ø 445/14 mm -Delivery of: steel/stainless steel cover plates possible -Number: 8x pillows available -Price: per piece -Weight: 1.5 kg/piece
Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 24mm total power requirement: 45+22 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Quick-release nut for balancing machine, clamping nut -Manufacturer: Haweka, quick-release nut for balancing machine -Item No.: 143 403 003 -Suitable for: Haweka ProGrip clamping devices with 40 x 3 mm shaft -Quantity: 2x quick-release nuts included -Price: per piece -Dimensions: 290/92/H80 mm -Weight: 0.7 kg/pc.
Varian Flat Panel Detector PaxScan 4030 A Size: 30 x 40 cm Part Number: 21206 Date of manufacture: 2006 Technology: amorphous Silicon (A-Si) Flat Panel Typical applications: DR X-ray systems, industrial imaging, materials testing Condition: used, removed from functional system (Varian Acuity EX therapy simulator) Applications: Replacement of existing Varian-based DR systems, components for service and repair companies, research & development • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried ...
; Gross weight [kg]: 696; Engine: Perkins 403D-11G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: sockets 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 746; Engine: Perkins 403D-15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
ThyssenKruppHPD 4037-OEM20214000 bar3.8 l/min19 mm37 kW1980 kgused, low operating hours per seller
; Gross weight [kg]: 765; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
Bookpress, Make I5542423 Hercules, Model 4030, Year 1950s, Size 300 x 400 I5542423 mm, Available Direct, Size: 300 x 400 mm
The machine (built 1999) comes with a table of 3 x 4m, can work with up to four cutting heads and is fully functional. The scope of supply includes an automatic sludge extraction system, sand storage tank incl. pressure vessel and an Ingersoll high-pressure pump. 2x head system. Can also run with 4x heads 1x pump included. has always been serviced. Is ready to use. Great working condition. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Robofil 4030SI-TW Wire EDM Machine Year of manufacture 2001 Technical details on request
Separator IFB 403 X-73 7500r/min 3-50/60Hz 230V Used tools
X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001
Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg
General SKU252T386 MakeAlfa Laval LocationBarneveld TypeAVNX 4030 AT Main Features MaterialStainless steel Motor18.5 KW Specified Features - Decanter Decantercheck Screw length1485 mm Inletdia. 55 mm Liquid outletdia. 210 Solids outlet286x468 mm Motor18,5 kW Max. rotor speed4000 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 General No.511.5024 Year of construction2001 With switchgearcheck Floorspace2,5x0,9 m Total height1,3 m Weight1400 kg Extra information Extra Specificationsbowl material: SS 1.4408 hood and bottom piece material: SS 1.4306 StarchBiotechnologyAgrochemicalsPlastic & polymersDecantersCatalysts & fillersPaper & otherOrganicsE-waste & metalAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteAlfa LavalIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > Agrochemica ...
internal diameter: - mm grinding depth: - mm swing diameter: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: - mm grinding depth: - mm swing diameter: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Edhard Filling & Dosing Machine PS-4030Edhard Filling & Dosing Machine / NEWDozing Machine PS-4030Power: Â Â 93 WattDetails see pictures
Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg
fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece
fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece
This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details.
A BPR ring bending machine is available. Shaft diameter: 40mm, max. roller diameter: 162mm, center distance: 300mm, shaft speed: 7.5rpm, max. flat steel bending capacity: 100mm/15mm, max. edgewise steel bending capacity: 60mm/10mm, max. bending diameter: 35mm, machine dimensions X/Y/Z: approx. 950mm/650mm/1400mm, weight: approx. 500kg. An on-site inspection is possible.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 159300 € : 3010.77 € : 320 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 5300 mm : 1910 mm : 3230 mm : 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm ...
Laser cutting machine Trumpf Trumatic L 4030
: neu : ca. 10 Wochen ab Auftrags : Türkei : 123713 € : 2338.18 € : 320 to : 4050 mm : Y1 / Y2 / X Achse : 365 mm : 3600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 18.5 kW : 5250 mm : 1770 mm : 2850 mm : 20000 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks ...
Digitale Etikettendruckmaschine SurePress mit Tintenstrahltechnologie / Digital Label Press with Inkjet Technology Digitale Etikettendruckmaschine / Digital Label Press Epson Sure Press L-4033AW Baujahr / Year 2016 - Serial-No. RXH0000088 Maximale Druckauflösung / Maximum Print Resolution: Papier / Paper 720 x 720dpi Film 1440 x 720dpi Rollbedruckstoff Durchmesser max. 100mm Druckgeschwindigkeit / Print Speed: Bis zu 5 m (16') pro Minute bei 720 x 720 dpi (auf Papier) / Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Die Epson SurePress L-4033AW ist eine industrielle Inkjet-Digitaletikettendruckmaschine, die speziell für den Etikettendruck in hoher Qualität konzipiert wurde. Besonderheit, das weiße Tintenset (AW = Auto White) ermöglicht den Druck auf transparenten Filmen und metallischen Substraten. The Epson digital label press capitalizes on Epson's acclai ...
The machine is in good technical condition; testing is possible by prior arrangement. NC-controlled X and Y axes, manual crowning table, backgauge extension to 1000 mm, Fiessler Akas Laser safety system, sectional tooling (upper: 30°, R 0.8 and 3 mm). Not used since 2019.
x-travel:560 mm y-travel:510 mm z-travel:510 mm control:Fanuc 18i GOP 3 spindle speeds:12000 1/min spindle drive:22 kW rapid travel x/y/z:42 mm/min Number of tool station:40 BT 40 Pallet dimension:2x 400x400 mm table load:0,5 t working diameter:max. 580 mm total power requirement:56 kVA weight of the machine ca.:8,7 t dimensions of the machine ca.:2,9x4,1 m Memory:125 Memory:320 m No. of tool offset pairs:64 offsets for parts:6 Macro B:82 var. Control Fanuc 18i M, 40 tool stations, trough spindle coolant Knoll 50 bar, 4th axis, Chipconveyor, twin pallet-changer tool magazine 40 BT 40
pressure:40 t throat:360 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:600 mm table surface area:620 x 500 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:150 mm table height over floor:850 mm ram surface:300 x 250 mm speed down:200 mm/s speed up:200 mm/s working speed:40 mm/s power requirement:11,0 kW weight:2,8 t dimensions (WxDxH):1,1 x 1,7 x 3,0 m drawing cushion in table:hydraulisch
pressure:40 t throat:350 mm material thickness: - 12 mm stamping power-diameter at 12 mm material thickness:24 mm stamping power-diameter at 6 mm material thickness:50 mm power requirement:2,2 kW weight:1,5 t dimensions (WxDxH):0,8 x 1,5 x 1,9 m
Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de
maximum number of results exceeded
please refine your search
