126,684 used machines on RESALE, but how to find them? Machine Search
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 92cm Width: 164cm Height: 150cm Electric power: 1.5kW Delivery time: After the payment, from the stock
Installation 2020 Plant shut down after 6 months and short test runs Original price 166.000,00 € Dosing and screening station Products - Product Name: Spices - Bulk density: approx. 0.4 - 0.7 kg/itr (AZO assumption) System characteristics Electrical characteristics Operating voltage: 230/400 V; 50 Hz. Control voltage: 24 VDC Degree of protection: IP 54 Compressed air characteristics Operating pressure: min. 5 bar /max. 6 bar Connections > 1/2" Compressed air quality class according to ISO 8573-1 Solid impurities: quality class 1 Humidity - at ambient temperature > 3°C: quality class 2/3 - at ambient temperature 10 mJ - KST value < 200 bar m/s - ignition temperature > 300 °C - Smoldering temperature > 275 °C - Contact Resistivity > 10° Ohmm
used
Key data: 2188 KW, 2702 kVA, 6300 V
CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL | YOM 2004 | Power 2,188 kWe | Natural gas Generator AVK 2,702 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset crankshaft it is turned periodically. ✓ Run test is possible but with some associated costs: necessary filling lub oil circuit with new clean oil, and some minor checkings. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...
used
Key data: 2745 KW, 3400 kVA, 6300 V
CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL (GS-J11 engine) | YOM 2016 | Power 2,745 kWe | Natural gas Generator Leroy Somer 3,400 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV ✓ Step-up transformer EFACEC 6.3/15 kV 3,500 kVA (YOM 2017) | Auxiliaries transformer ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset is kept hot and crankshaft it is turned periodically. ✓ Genset is ready to run. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...
Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm
; Gross weight [kg]: 3254; Engine: Cummins 6LTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 525
New machine BÄKO SPECIAL OFFER with 3 year warranty BÄKO Item No. 821189 Benefits: + TOP value for money + robust, mobile socket roll-out machine + Operation with lever sand sand sands and pedals possible + suitable for all types of dough for rolling out and touring + PVC conveyor belts, easy and quick to clean + therefore even suitable for marzipan and roll fondant + integrated electric motor + large digital display of the roller setting, instead of a mm scale on the lever + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Dough collection sheets made of stainless steel, on both sides of the table, pull-out + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 650 mm - Table length: 1,320 mm each = 2,640 mm - Roller adjustment: from 0.5 mm ...
New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + with dough collection plates on both sides + fast spare parts supply within 1-2 business days
Key data: 48 KW, 60 kVA, 400 V
MODEL NO.: EQ-P6048 ENGINE: Perkins 1103A-33TG2 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V POWER: 60(kVA) / 48(kW) CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1179kg DIMENSIONS L/W/HEIGHT (MM): 250010001250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For ...
New machine Stainless steel model 12-month warranty Benefits: + Machine completely in stainless steel + with automatic reel + Dough tape is shaved up without significant tension + with automatic flour spreader + with automatic roller adjustment + with integrated electric motor + high quality synthetic tapes, easy to clean + easy to drive, with steering wheels and locking feet for stable grip + Operation with touch panel + Computer control (100 programs) and manual operation via push-buttons possible + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Hand reel supports left and right + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Piece of do ...
Key data: 64 KW, 80 kVA, 400 V
MODEL: EQ-P8064 ENGINE: Perkins -64 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V POWER: 80(kVA) / 64(kW) FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1357kg DIMENSIONS L/W/HEIGHT (MM): 260010001250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or individual advice on ou ...
New machine 24-month warranty Benefits: + Solid construction + Boiler, central rod and spiral made of stainless steel + Drive with two motors (spiral & boiler) + Flour dust hood closes gently with dampers, with auto shut-off + mobile machine, on swivel wheels, with fixed boiler + Dirt protection cladding for adjustable feet + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast spare parts supply within 1-2 business days Technical data: - Flour capacity: 4 - 40 kg - Dough capacity: 6 - 60 kg - Boiler volume: approx. 95 litres - Boiler outer edge: 640 mm - Engine power: 3.75 kW (kneading spiral & boiler drive) - rpm at 50Hz (1st / 2nd gear): 135 / 270 - Connection values: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions in cm: 68 x 108 x 128 (WxDxH) - Heigh ...
Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm
Machine details Bearing number 1105-03112 Machine type Machining Center - Vertical Make FAMUP Type MCX 600 Built in 1995 Control type CNC Warehouse HAGUENAU Country of origin Italy Delivery time immediately Freight base EXW 'as available' Technical details x-path 600 mm y-path 400 mm z-way 400 mm Control SIEMENS 810 D - Travel X-axis 600 mm - Travel Y-axis 400 mm - Travel Z-axis 400 mm - Number of NC axes 3 - Clamping surface (left-right) 400 mm - Clamping surface (front-rear) 400 mm - Workpiece weight (max) 300 kg - Speed range up to 6000 rpm - Tool holder ISO SK 40 - Drive power (max.) 11 kW - Number of tool positions 18 - Tool diameter max. 75 mm - Tool change time 2 s - Space requirement length 3200 mm - Space requirement width 2,900 mm - Total height 2600 mm - Total weight approx. 3500 kg Information Machine under power CNC SIEMENS 810 D Count ...
Wiedenmann foliage loading blower KLB 645, Honda 4-stroke gasoline engine GX 240, 6.0 kw/8 hp, turbine approx. 380 mm, with suspension for side wall. Incl. telescopic gallows and approx. 3 m suction hose with suction nozzle and handle as well as settling frame with lift. Ready-to-use good condition.
; Gross weight [kg]: 10388; Engine: Perkins 4012-46TAG2A; Accessories: Battery, Control Panel
; Gross weight [kg]: 5694; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charge and coolant heater; Water Tank Volume [l]: 1132
; Gross weight [kg]: 4202; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132
; Power [PS]: 658; Gross weight [kg]: 5554; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132
; Gross weight [kg]: 4342; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132
Product number: 1915 Type: BR3000/600 Serial number: 888 Belt width: 600 mm Frying length: 3000 mm Heating: thermal oil, 90kW Power: 3 x 380V, 50Hz, 3.6kW Dimensions: 5650 x 1800 x 3450 mm Weight: 2150 kg Hold down belt, sediment removal, circulation pump, oil level control Prepared for CO2 fire extinguisher
Pleiger Hydromotor for Krauss Maffei MO 8000
Simatic Multi Panel Touch Siemens Siemens MP 277 10 inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 pieces Condition: used Price per piece Width outside: approx. 330 mm Depth outside: approx. 275 mm Width inside: approx. 305 mm Depth inside: approx. 245 mm Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to make you an individual offer or advise you on the design or installation questions. Simply let us know your ...
CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg
Engine Make Jenbacher Engine Type JGS 620 GS Power KW/RPM 3044/1500 Fuel Natural gas Generator Voltage 10500 V Hz 50 Year of Manufacturing 2011 Running Hours 42666 30k service done at 32.000 hours GAS POWER HOLLAND 00316 38 63 90 71 whatsapp
Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg
3500 SSI Schaefer EURO-Dimension 643-66 Features • Material: High quality polypropylene (PP) • Color: Blue / Gray • Volume: 60 litres • External dimensions: 600 × 400 × 320 mm • Internal dimensions: 570 × 370 × 305 mm •Ultimate load: o Static: 40 kg o Load (stacked): 180 kg • Temperature resistance: -30 °C to +60 °C • Weight: 2.8 kg • Foldable: Yes (reduces volume by 81%) • Floor & Walls: Closed • Handle: Handle-through handle for easy transport Price € 14,- net excl. VAT • Quantity discount: € 11 per piece when buying a pallet (100 pcs.) • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment The box in EURO size 643-66 without lid (60 l) from Schäfer Shop is a robust, stackable plastic container, ideal for storage and transport in indust ...
Product number: 1930B Type: BR4500/600 Serial number: 939 Belt width: 600 Frying length: 4500 mm Heating: thermal oil Power: 3 x 380V, 50Hz, 10kW Dimensions: 7400 x 1900 x 3150 mm Weight: 2750 kg Hold down belt, sediment removal, circulation pump, electric hoists, oil level control Prepared for CO2 fire extinguisher
Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emerge ...
The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw ...
Key data: 2679 , 6300
Available One complete Jenbacher 616 plant from 2016, with 33,000 operating hours. All maintenance has been performed by the official service. The engine has a power output of 2,679 kW and an electrical output voltage of 6,300 V. The generator brand is Leroy Somer. Scope of supply includes: Genset, cooling system, transformer, DIANE XT4 control system, fans, generator circuit breaker, gas train, low and high temperature pumps and heat exchangers, silencer, and heat recovery system from exhaust and oil. The plant is disassembled and ready for loading at our warehouse. Boroscope inspection, maintenance records, and inspection reports are also available. You are welcome to visit and inspect the assets at any time.
RITTAL SK 3365.662 Wall-Mounted Cooling Unit – Blue e Series High-performance wall-mounted enclosure cooling unit designed to provide reliable temperature control for electrical cabinets and control panels in industrial environments. The RITTAL SK 3365.662 from the Blue e Series offers efficient cooling performance and energy-optimized operation for temperature-sensitive electronics. General Information - Manufacturer: RITTAL - Model: SK 3365.662 - Series: Blue e - Machine Type: Wall-mounted cooling unit Technical Specifications - Cooling Capacity: 1,500 W - Voltage Supply: 230 V AC / 50–60 Hz - Protection Class: IP54 (internal and external circuits) - Refrigerant: R134a Dimensions and Weight - Dimensions (W × H × D): 435 × 1,090 × 260 mm - Weight: approx. 45 kg - Condensate Management - System: Electrical condensate evaporation Key Features - Energy-e ...
InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...
Technical data for the pallet pull-out: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet pull-out, used for shelf depth: 800 mm Material color: blue Total depth: approx. 810 mm Total width: approx. 1,295 mm Height: approx. 265 mm Extension: 100 % = 740 mm Weight|pcs.: approx. 100 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Key data: 600
New planboard Roehm 600 mm Direct recording Camlock - 8
maximum number of results exceeded
please refine your search
