mak 6 m used for sale

An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.

Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

Key data: 6020 mm, 1 mm

With hydr. Roller shears SM 1.5 and depth stop (4 stop fingers). with emergency stop rail, slide-back sheet metal supports and control on the swivel arm, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Back gauge: 1000 mm Colour: blue Total power requirement: 16 A Dimensions: 6810 x 1580 x 1870 mm Insertion depth: 1000 mm Machine weight: 3000 kg Upper beam stroke: 200 mm Roller shears motorized Number of stands: 5 pieces Opening width: 200 mm Bending angle: 140 degrees Back gauge: 25 mm Machine number: 9888-10

Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, worm type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Max. stroke  ...

Homag modular unit, finishing unit, buffing unit, polishing unit format processing unit, double-end profiler, edge processing machine, -Polishing finishing unit: from Homag edge banding machine -Motor: 0.25 kW -Heights adjustable and rotatable -Number: 2x aggregates available -Speed: 1x 2780 rpm, 1x rpm -Price: per piece -Dimensions: approx. H520/D300/W280mm/H520/D300/W280mm

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible.

rand: Dr.Boy Model: 60E Year of construction: 2023 Working hours: 50 Screw diameter: 32 mm Injection pressure max.: 2.142 bar Shotvolume max.: 100,5 cm3 Clamping force: 60 T Max. distance between holms: 360 x 335 mm Min. mould height: 250 mm Distance between plates max. 650 mm Measurements: 3.450 x 1.150 x 1.950 mm Weight: 2.250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + Licence fee) • 4 Free programmable AIO’s • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed & moving platen – Water distributor 8-fold – Ejector with quick coupling – Open nozzle with thread tip • Energy distribution box 6-fold (feeding via second cable)  ...

- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Height=1.93 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 147 kg,

Type: HSB-600 Serial number: 118 Year of construction: 2011 Belt width: 630 Power: 3 x 400V, 50Hz, 16A Dimensions: 4400 x 1750 x 2250 mm Weight: 1600 kg

KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg

Inv. Num. : 6800 Type: 6020 Producer: RT Created: 2016 Parameters: Work table length: 6000 mm Work table width: 2000 mm Machine weight: 8000 kg Equipment: 3D Head TECHNI Possibility of 3D cutting

Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.

Please refer to Fig. 2 for technical data

Please refer to Fig. 2 for technical data

OIL HEATING Year: 2023 BUDERUS GE 615 921-1020 POWER 1020 KW BUILT IN 20 FOOT SEA CONTAINER So far only a few days trial run / as good as new !

This 5-axis Romi DMC 620-5 was manufactured in 2016, featuring a Siemens 840D ShopMill control, 620/520/460 mm travels, and a spindle speed of 12,000 rpm. It includes a 30-position tool changer and a belt-type chip conveyor. With less than 10,000 operational hours in a single-shift, consider the opportunity to buy this Romi DMC 620-5 vertical machining centre. Contact us for more information about this machine.

The Flexa 607 automatic edge banding machine is an extremely versatile machine with a high performance that puts it at the top of its category. Productivity: The high machining speed of up to 22 m/min ensures high productivity in all working conditions. The XE version with controlled axes enables extremely fast and precise machine setup. Flexibility: The optional equipment of the machine with a belt press allows the processing of any type of material. FLEXA 607 / 607 XE Panel height 10 (13) ÷ 60

Key data: 480 mm, 2000 mm, 3050 1/min

Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg

Injection Molding Machine FCS SD 6000 BJ 2016

ABB IRB 6640-205/2.75 Robot Mechanics Only Number of axes: 6 Max. load capacity: 205 kg max. working range: approx. 2750 mm Year of construction 2012 Scope of delivery: robot mechanics 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. Freely loaded / ex works. Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.

centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

Offer 26037 Technical data approx.: - Plate length approx. 6000 mm - Plate width approx. 1800 mm - Top height without base approx. 360 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 6 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 6000 x D 1850 x H 870 mm - Weight approx. 11000 kg

The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...

Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis

Height=1.49 m, Overall length= 1 m, Overall width= 2.27 m, Net weight= 573 kg,

1 piece surface grinding machine FS 640 SC with Fagor control Make: Geibel&Hotz Year of Make: 2010 Technical data Working Range: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic plate dimensions 600 x 400 mm - Clamping surface table to spindle centre 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Power grinding spindle motor approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Transverse/vertical speed 100-1000 mm/min Dimensions 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Facilities machine-specific accessories, belt filter system, magnetic separator, extraction Magnetic clamping plate with adhesive force control, automatic dressing incl. compension, Dressing diamond, balancing device, clamping device, 4 grinding wheels

This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine.

This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine.

This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us.

This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information.

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information.

This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm.

This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.

This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information.

This 3-axis Okuma MA-400HA horizontal machining center was manufactured in 2005. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine.

This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information.

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details.

This 3-axis AWEA AF-650 vertical machining center was manufactured in 2017. It features a table size of 750 x 510 mm, can handle a maximum load of 500 kg, and offers axis travels of X = 650 mm, Y = 510 mm, Z = 510 mm. Equipped with a high-speed spindle at 20,000 rpm and a Fanuc 0i-MF CNC control, its ideal for precise machining tasks. Contact us for more information about this machine.