mak 6 m used for sale

DEAR'S SALE, MAK 8M601 SPARE PARTS 8CYL STD CRANKSAFT, LINER, PISTON, CONROD, FULL COVER ANY SPARE PARTS Brgds Hakan KUSCU +905323642509 info@kscege

Dear's Sale, used 1 complete engine Mak 6M552AK Also, cover, piston, liner, conrod new/used, fuel pump, 6cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

DEAR'S SALE, MAK 552AK FULL COVER, GOOD CONDITION Brgds Hakan KUSCU +905323642509 info@kscege

Technical Specifications: Model: GUR IS MAKINA TY 1050 Bottom and side seal bag making machine Year:2005 Roll Width: 1100 mm Welding Width: 1050 mm Bag Length (Max): 2500 mm Bag Length (Min): 120 mm Cycles Per Minute: 140 U/min Drive:Servo Number Of Lanes: 1 Other Specifications: Material that can be processed: LDPE, HDPE, MDPE; LLDPE and recycled Bottom seal bag making machine Type of bag: Bottom and side weld (open mouth) Sealing bar Fast change of the welding bars, ideal for the production of two kind of bags. Equiped with 2 welding bars (bottom, perlada) Servo Motor Driven Type of delivery: Conveyor table punch 4 folding pleat bottom side Knife central and side System base support for 2 rolls operator panel PLC systems Complete knife belt with knife holder Photocell Antistatic bar Condition: operat ...

Description: consisting of three machines manufacturer MAKINO Type A55-A208 / Type A55-A206 Machine no.: 80-4006-0125 / 80.4006.0226 Type A55-A206 / Machine No.: 80-4006-0271 / Year of manufacture 1999 Operating voltage 400 V / 50 Hz Total rated current 90 A Supply cable cross-section 35 mm³ Cu Travelling distance X/Y/Z 560 mm Feed speed: 40 m/min Rapid traverse 40 m/min Workpiece weight 400 kg Spindle speed 14000 rpm 21 pallets in the system Approx. 600 tool holders (SK40) without tools , Pallet dimensions 400x400 mm Control SIEMENS Type 840 C incl. pallet automation Attention: one machine is defective and can therefore only be used as a spare parts dispenser  , control: SIEMENS Type 840 C, taper: SK 40, rapid motion: 40 m/min, weight approx.: 40,000 kg, Approx. Onsite Dimension. (l x w x h): 30,000 x 10,000 x 3,500 mm

Model:2012, 1500mm Spindle:115 mm, Over Counter Diameter: 580 mm, Swing Diameter on Support: 300 mm. Bridge Gap Diameter 740 mm. DIAMETER Counter Width: 700 mm, Transverse Support Width: 460 mm, Turning Size Net:1500 mm, SPEED INTERVALS: 16 STEPS / 26 - 2000 rpm. ENGINE POWER: 7.5 KW Sleds are clean. ( FIXED and TRAVELING BED ) 3x 300 Mirror, 3x 200x Mirror HIGH PRECISION RADIP ENGINE / SERIAL MOVEMENT WATER AND LIGHTING EQUIPMENT BACK SHEET AND MIRROR PROTECTION AND CHIP SPRINGS IT IS ON THE SHEDDING HOUSING. FLANGES, TAILS, KEYS and FULL tool kits are available. Fixed bed, floating bed and special pipe bed in different large diameters (2 pieces), Rapid on Transverse Support, There are double-stage and rapid (fast movement) tailstock. Swich Stopper Feature for Occupational Safety. ( EMERGENCY STOP BUTTON ) It has been used very little and cleanly. HIGH SP ...

Bag Filling and Sealing Machine Bread Packaging PS Mako VA 660-C -Pouch Packing Machine P+S Mako -Manufacturer: PSmako GmbH -Model: VA660-C -Year of construction: 2013

2930-12-A07-0048 0030982820

SAY MAK ROUND BENDING MACHINE TYPE MSM 1080 x 100 -Capaciteit 1080 x 3.5 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 600 kg -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE MSM 2080 x 100 -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 850 kg -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

Makro 6 Station Auto Change Self Adhesive Labeler Model: Mak-5 24P UA6 L3 C03 With Optical Bottle Positioning System Available Immediately Year 2018 Low hours

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 31i Technical data Table length: 750 mm Table width: 450 mm Table load max.: 300 kg Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 350 mm Dimension of the workpice: Length: 750 mm Width: 635 mm Height: 250 mm Tool magazine number of tools: 60 Tool diameter max.: 80 mm Tool lenght: 250 mm Max. tool-weight: 7 kg Time of tool changing: 4.8 sec Spindle nose: HSK: E50 Distance spindle nose to table: 150 - 500 mm Spindle speeds: stepless from: 300 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Air connect: 4 - 8 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 17/13 kW Total power required: 50 kVA Machine´s weight about: 7700 kg Overall ...

2930-12-334-9277 / 0052000675

2930-12-378-7717 5260981120

2930-12-378-7720 5260981220

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Machining center horizontal MAKINO MAG 1 Manufacturer: Makino YEAR: 2015 Control Fanuc Clamping table surface ... 800x800mm Axis X ... 1520mm Axis Y ... 1100mm Axis Z ... 1350mm Spindle speed... 500-33000 rpm. controlled axes ... 5 cooling HSK - F80 workpiece height ... 1500mm workpiece weight ... 1300kg workpiece diameter ... 1500mm Axis A ... 110° Axis B ... 360° The machine is in good condition, possible to test under power.

5-axis horizontal machining center Makino MCD 2016 Year of construction 2005 Fanuc 16MC + Pro 3 Controller 2-fold pallets 1,300 x 1,300 mm Pallet load per pallet max. 12,000 kg ! 4e axis B-axis 360° / 0.001° 5e axis 25° spindle holder, C-axis + /- 185° X 2,000 mm Y 1,600 mm Z 1,500 mm Spindle drive power 50 kW Spindle speeds up to 15,000 rpm. Tool holder BT50 Big Plus 99-fold automatic tool changer ATC Renishaw Touch Probe Scales on X, Y, Z, B axes Conveyor IKZ 28 bar Great condition To be visited under power Offer number MH-6265

Labeller MAKRO 16 heads Year: 2014 Speed: 12.000 bph Direction: Counterclockwise 16 heads Optical centering Eletrical camme 2 adhesive stations 2 cold glue stations Safety protections Reconditioned

Nakamura Tome Super-Mill WY-250L CNC Multi-Axis Turning/Milling Center Age : 2012 FEATURES: FANUC 31I-A CNC CONTROL DUAL OPPOSED SPINDLES WITH C-AXIS UPPER & LOWER TURRETS WITH Y-AXIS LIVE MILLING ON BOTH TURRETS CHIP BLASTER LNS QL SERVO S3 BAR LOADER CHIP CONVEYOR SPECIFICATIONS: DISTANCE BETWEEN SPINDLES 47.24" MAXIMUM TURNING DIAMETER 8.9" MAXIMUM TURNING LENGTH 35.8" X-AXIS TRAVEL, X1/X2 6.3" / 6.5 Z-AXIS TRAVEL, Z1/Z2 35.8" BAR CAPACITY 1” MAIN SPINDLE: MAIN SPINDLE SPEED 3500RPM MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE BORE 2.6" MAIN SPINDLE NOSE A2-8 C-AXIS ROTATION 0.001 DEGREE SUB-SPINDLE: SUB SPINDLE SPEED 4500RPM SUB SPINDLE BORE 2" SUB SPINDLE MOTOR 20 HP SUB-SPINDLE NOSE A2-6 C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 37.2" UPPER & LOWER TURRETS: DRIVEN TOOL SPEEDS 6000RPM DRIVEN TOOL MOTOR 7.5 HP Y-AXIS MOVEMENT 4"/2" EQUIPPED WITH: FA ...

Akar Makina Truck Builder Machine Model AKR172 Year 2021 Total power: 4.5 Kw Working pressure: 8 bar (120psi) Manual and automatic use TECHNICAL FEATURES PLC controlled precured tread builder for tyres 700 mm (27.5") -1450mm (57") with expandable hub and rim system User friendly easy operation Tyre range: 7.50 R 15 - 12.00 R 24 Expandable rim: 20-22.5x9" included (Other sizes are optional) Three-zone pneumatic pressure application feature Two-mode tire rotation with pedal control Adjustable speed control tread application on tires Controllable stitching and building operation with tread stretching Three-line optical laser centering system CE Certified

SAY MAK ROUND BENDING MACHINE TYPE SR 1050 x 75 -Capaciteit 1050 x 2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SIR 1050 x 46 -Capaciteit 1050 x 0.8 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SIR 1050 x 75 -Capaciteit 1050 x 2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SHYAM 2050 X 140 -Capaciteit 2050 x 4 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SR 1050 x 68 -Capaciteit 1050 x 1.5 mm -Walsen Conisch -Bovenrol Wegdraaibare -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SR 1550 x 75 -Capaciteit 1550 x 1,2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SHYAM 1050 X 130 -Capaciteit 1050 x 5 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SHYAM 1550 X 140 -Capaciteit 1550 x 4 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TO WHOM IT MAY CONCERN; WE VE GENUINE NEW & RECON SPARE PARTS OF MAK 8L 35 AT OUR STOCK. READY TO SHIPMENT IF YOU'VE ANY FURTHER QUESTIONS PLS LET ME KNOW Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

SAY-MAK SWIVEL BENDING MACHINE TYPE SCM-H 2060 - Capaciteit e 2060 x 1.2 mm - Max buighoek 135 ° DUTCHMACH Bhbyyphejo Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border) Request more information

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

Model: 16CM32, Diesel, 7.370ekw @ 720rpm, 11Kv/60Hz, WITH COOLING SISTEM.

MTU 12V396 SE TE94 INTERCOOLER NATO STOCK KODE 2930-12-A07-0048 ORIGINAL PART NUMBER 0030982820 DIDAR MAKINA PART NUMBER 2605710002

Makino U 86 Wire ereroding machine, Built in 2001, Multipulse control, Travel X/Y/Z 800/600/500 mm, max table load 3,000 kg, Bath size X/Y/Z 1220/910/500 mm, Clamping surface table 1220 x 910mm,

CNC - Control Makino Travel x/y/z 370 mm / 270 mm / 220 mm workpiece dimensions L/W/H 790 mm / 670 mm / 220 mm Wire diameter range 0.1 mm – 0.25 mm workpiece weight 600 kg cone at 100 mm height +/- 15° Mitsubishi - Axle Drives

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Bread packaging machine PS Mako VA 460-OSP - Bread bag packaging machine - Manufacturer: PS Mako - Type VA 460 - OSP - Year of construction 2007 - Supply line: 3x 400 / N / PE - Power 4.5 kW - Fuse 16 A

CNC Tool grinder Makino Seki Mod.CNJ5u-H Year: 2009 Excellent condition, occasionally used by Samsung Electronics.

CNC for doors or stairs Boom machine with console table 4-axis x- axis 5000 mm Y-axis 1350 mm z- axis 450 mm a- axis 190 degrees Double occupancy at the table Machine has run little

- German production - universal head 360" TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 4 kW 3 left spindle 4 kW 4 top spindle 4 kW 5 universal spindle 4 kW electric height adjustment feed on cardan shafts two types of feed speed pre-table top length 2500 mm minimum element length 350 mm connection diameter 140 mm Machine dimensions 450x170x160 cm weight ~ 1400 kg

– German production – year of production 1997 TECHNICAL PARAMETERS: track width 250 mm cutting height 120 mm .max. disc diameter 350 mm spindle diameter 50 mm sleeve diameter 70 mm six upper pressure rollers four rows of latches Min. material length 600 mm .max. width materials 680 mm smooth feed adjustable up to 22 m/min electric height adjustment ruler central lubrication engine power 22 kW connection diameter 150 mm machine dimensions (L/W/H) 210 / 160 / 210 cm weight 1600 kg

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

Technical data/equipment: - Working width 530 mm - Strip knife shaft, 4 knives - Connection 12A, 5.6 kW, 380 V, 50 Hz - Vibration protection planer shaft cover - electr. Table height adjustment - Shaft speed 5,000 rpm

CNC controller: MAKINO PROFESSIONAL 5 Axes X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 20.000 Spindle drive power kW: 50 Cooling Cooling through the Spindle Center: 70 Tank capacity: 3.100 Tool system Tool holder: HSK-A100 Tool magazine slots: 300 Equipment Chip conveyor High pressure pump

CNC controller: MAKINO PROFESSIONAL 5 Axes X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 20.000 Spindle drive power kW: 50 Cooling Cooling through the Spindle Center: 70 Tank capacity: 3.100 Tool system Tool holder: HSK-A100 Tool magazine slots: 300 Equipment Chip conveyor High pressure pump

- Clipper Bread Bag Pouch Clip - Clipping machine - with turntable - with high-transport belt