mak 20 used for sale

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

3 driven rolls conical bending overload protection hardened rolls 2 digital readouts for positioning or bottom rolls Number of rolls: 3 rolls Roll capacity cold: 2050 x 25 mm Roll dia upside: 320 mm Dia under roll - side rolls: 310 mm Power needed: 22 kW Length: 4600 mm Depth: 1950 mm Hight: 1750 mm Weight: 10,5 ton

Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Lincoln Electric, mobile welding fume extraction system type Mobiflex 200-M -Drive: 0.75 kW -Extraction arm: Ø 205 mm x 3930 mm -Transport dimensions: 1520/830/H2510 mm -Weight: 109 kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 65200 € : 1232.28 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 71600 € : 1353.24 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

Bosch / Skinetta complete ampoule line Used Bosch/Skinetta line for processing open glass hopper and spit ampoules. The line includes machines for washing, sterilizing and depyrogenating, filling, closing, labeling, cartoning and tightening. The maximum line output is up to 18,000 ampoules per hour, depending on the ampoule size. Format parts for 1 ml ampoules are included. The plant was completely dismantled in January 2026 and is unpacked at the operator in China, near Hong Kong. Plant data Manufacturer: Bosch / Skinetta Year of manufacture according to available information: 2009 Location: China, near Hong Kong Delivery condition: disassembled and unpacked Components of the line Bosch RRU 3063: Ampoule washing machine Bosch HQL 2220: Sterilization and depyrogenation tunnel Bosch ALF 4060: Ampoule filling and sealing machine Bosch ERS 2010 (500): Ampoule label ...

DMN Westighouse, type AL 200 SD, inlet and outlet 200 mm, housing and rotor in full stainless steel 1.4408 - Flange connection DIN PN 10, rotor volume 10.5 litres, direct drive SEW 0.55 KW, output speed 20 rpm

TWISTING 120 POSITION EACH MACHINE

Biogas CHP Jenbacher 208 Year: 2005 Operating hours 10/2026: approx. 88000 Rated power: 330 kW Speed: 1500 1/min Stamford Generator with 600 kVA Incl.: System control cabinet, power cabinet, module interface cabinet, separate exhaust gas heat exchanger, 2 silencers, table cooler, heat extraction if desired. Available expected February/March 2027 Subject to prior sale - errors possible! Internal reference number: E-1226

Lindner T500/200-4 stationary industrial wood chipper, year 1979, made in Austria. 90 kW main drive, 380 V, 50 Hz, electric motor with V-belt transmission. Feed hopper with toothed infeed rollers, heavy knife rotor against fixed counter-knife and integrated screen for controlling chip size. Fully welded steel construction for processing wood, slabs, edgings and sawmill residual wood. Heavy-duty machine designed for continuous sawmill operation, overhauled in 2026 and immediately available.

CNC control HEIDENHAIN iTNC 530 with handwheel, travels: X-axis approx. 1,500 mm, Y-axis s approx. 2,400 mm, Z-axis approx. 800 mm, clamping table length x width x height approx. 2,500 x 1,500 x 530 mm, table load max. 500 kg, milling spindle spindle power 4 KW, spindle speed 6,000 rpm, tool holder 78/8 flange, feed speed X-, Y-, Z-axis 20 m/min, axis acceleration 1.5 m/s², space requirement machine 6,000 x 4,000 x 3,900 mm, total weight approx. 8,000 kg, NOTE: Fully functional condition, regular maintenance by machine manufacturer! The machine is already at another location at Kartonstraße 2, D-88255 Baienfurt. Freely loaded FCA D-88255 Baienfurt

engine lathe, year 2008. Used machine. More info & price on IndustrialBuyer.

saw-blade dia.: 500 mm Cutting height: 120 mm Motor output: 5,5/7,5 kW working length: 4100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCODIX ULTRA 202 Year 2019 Printing counter: only 230.000 copies Paper size Min: 29 x 42 cm Paper size Max: 54 x 78 cm Printing size Max: 74 x 50 cm Foil technology Digital in-line with Scodix PAS foil technology Foil roll width (min/max) 50-500 mm/1.97-19.68 in Foil roll size Diameter:max 30 cm, Length:max 2,000 m, Core:77mm/3 in Max number of simultaneous rolls Up to 4 rolls Polymer layer thickness From 5 up to 250 microns Substrate weight 135-675 gsm/6-30 points Substrate thickness Up to 700 microns Foil film type Wide variety of industry standard hot/cold foil films Substrates Offset, Plastics, laminated and coated/uncoated substrates Resolution Up to 2540 x 450 DPI Variable Data Enhancement (VDE) PDF, optimized PDF, barcode system (optional) Scodix RSP™ Technology 4 CCD camera system, RSP™ (Rotate, Scale, Position) algorithm, automatic positioning, ± 100 micron image to image r ...

ATS-Tanner US-2000 IBL-SM-E Banding Machine – Year of Manufacture: 2016 ATS-Tanner US-2000 IBL-SM-E banding machine (Swiss-made) featuring ultrasonic tape welding—a true all-rounder for banding a wide variety of products: from playing cards, raffle tickets, vouchers, and other printed matter to pharmaceutical package inserts and folding cartons, as well as food trays and convenience products. Technical Specifications Manufacturer: ATS-Tanner Banding Systems AG (Switzerland) Model: US-2000 IBL-SM-E Year of manufacture: 2016 Performance: Up to 30 cycles/min (depending on product and infeed) Welding system: Ultrasonic (no warm-up time, immediately ready for operation) Banding material: Paper or film tape, 30 mm tape width Arch size: 260 x 120 mm (base unit US-2000 AD) [adjust if necessary: 260 x 180 / 260 x 260 mm] Electrical connection: 200–240 V / 50–60 Hz Pneumatic connection: 6  ...

2 Sorting Devices / Separators TiTeck Polysort Basic 2000 Year of construction 2017 incl. acceleration band Fabr. ZENO incl. discharge hood operational condition Sale against bid from location D - Rhineland-Palatinate Code No. Q71

5 electric chain hoists 2.0 Ton, ABUS

Rotary light material separator ZENO ZZR2000 Year of manufacture 2018 Electric drive 1.1 kW Drum diameter 2,000 mm + 6 air chambers max. air volume 40,000 m³/h Inlet nozzle Ø 500 mm + outlet pipe Ø 500 mm Outlet 1,500 x 710 mm Weight approx. 2.1 t operational condition Sale against bid from location D - Rhineland-Palatinate Code No. Q70

Conveyor belt SBM 650 20M Year of construction 1992 Conveyor belt center distance 20 m x belt width 650 mm E-motor 7.5 kW + gearbox smooth belt V-Column partly catwalk operational condition Net price ex location € 7,900,-- + VAT Sale from location D - BL Thuringia Code No. Q62

table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm Side panel height: 200 mm work height max.: 850 mm weight: 850 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >> - high-quality steel S355J2+N + plasma nitriding - Side panel holes in diagonal grid - Corners, edges and drill holes chamfered 45° - Construction reinforced with ribs - incl. basic foot equipment (working height 850 mm) Accessories: - 6 x Pipe-bend clamp, nitrided - 12 x Quick-release locking pin (without groove), double-burnished - 6 x Universal stop 150 L, nitrided - 2 x Universal stop 225 L, nitrided - 2 x Universal stop 325 L, nitrided - 4 x Stop and clamping square 175 L, nitrided - 2 x Stop and clamping square 300 G, nitrided - 1 x  ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 210 mm turning length: 700 mm control: Okuma OSP-E 100 L total power requirement: 35,7 kVA weight of the machine ca.: 7,1 t dimensions of the machine ca.: 2660 x 2000 x 2330 mm CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2  ...

8 pieces of water pumps DN200 90 kW Siemens Motor 520 cbm/ min Pumping height 47 m Subject to prior sale - errors possible! Internal reference number: D-1230-04

Westeria conveyor belt type BFV AA approx. 11.6 m x GB 1,160 (1,200) mm Conveyor belt center distance approx. 11.6 m x belt width 1,160 (1,200) mm Year of manufacture 2007 Belt with carrier, troughed without drive divisible  operational condition Sale against bid from location D - Saxony-Anhalt Code No. Q40

Recycling sieve Spaleck SEWU 2000x4000 Year of manufacture 2007 without drive & springs  Spare parts dispenser Sale against bid from location D - Saxony-Anhalt Code No. Q37

Ulma FR 200 The electronic, automatic flow wrapper type ULMA FR 200 has been specially developed to pack a variety of different products in flat bags (flow-pack) or pillow packs. Technical Specifications Model No.: FR 200 Condition: Used (Overhauled by ULMA Germany) Year of Make: 2022 Capacity: Up to 70 packs/minute (depending on film/paper and product properties). Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2500 mm Features ✅ Stainless steel version ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing except for high products (max. 160mm) Width sealing bar 300mm ✅ Beret system due to the cross-sealing for heavy bowls ✅ Function No product / No bag ✅ Suitab ...

Wipotec OCS HC-EX-2000-1 Checkweigher for aerosol cans – year of manufacture 2018, unused Jandl PharmaTech Solutions offers for sale an unused Wipotec OCS HC-EX-2000-1 checkweigher, built in 2018, in new condition. The explosion-proof system was designed for the automatic weight control of aerosol cans and combines product separation, weighing and discharge in one conveyor line. The project-specific design provides for a maximum throughput of 300 pieces per minute and a gross weighing range of up to 1,500 g. The actual performance and weighing accuracy that can be achieved depend on the product, the format and the installation conditions. Machine data Manufacturer: Wipotec-OCS GmbH Type: HC-EX-2000-1 Year of manufacture: 2018 Condition: unused / new condition Design: explosion-proof checkweigher Application: Weight control of aerosol cans Gross weighing range accord ...

Tetra Pak Tetra Alex 2 (TA2/200BAR) high-pressure homogeniser, designed for the homogenisation of milk, dairy products and other liquid food products., The machine is equipped with a 3-cylinder homogenising block and a single-stage homogenisation system with mushroom-type valves. The maximum design capacity is up to 6,500 litres per hour at a maximum pressure of 160 bar. With the currently installed 30 kW motor, the machine is configured for a capacity of approximately 4.000 litres per hour at an operating pressure of up to 200 bar with a piston diameter of 40 mm. The homogeniser is equipped with hydraulically operated pressure-setting valves, mounted on the side panel, allowing adjustment of the homogenisation pressure. A pressure gauge is installed to monitor operating pressure and pulsation dampers are ensure smooth product flow. The machine also features an integrated oil pumping sys ...

x-travel: 1.704 mm y-travel: 1.210 mm z-travel: 1.003 mm Control: Heidenhain TNC 426 total power requirement: 65 kVA weight of the machine ca.: 16 t dimensions of the machine ca.: m Well-maintained CNC bed-type milling machine, subject to regular maintenance and servicing by a specialist company. The machine can be inspected under power and in operation (cutting). CNC Control: Heidenhain TNC 426 (6-axis) [Travel Ranges] X-axis: 1.704 mm (longitudinal) Y-axis: 1.210 mm (transverse) Z-axis: 1.003 mm (vertical) Spindle speeds: 35 – 3.000 rpm Number of gear stages: 2 Tool taper: SK 50 Main motor power: 28 kW Feed rates: 6 – 5.000 mm/min Rapid traverse: 15.000 mm/min Table clamping surface: 2.000 x 800 mm Table load capacity: 6.000 kg [Tool Changer] Max. tool diameter: 125/250 mm Max. tool length: 300 mm Max. tool weight: 25 kg Total power consumption: 65 kVA Machine weight: 16.000 kg Equ ...

Key data: 250 mm, 750 mm, 4800 1/min

CNC lathe ECOCA MT-208MC 750 YEAR OF CONSTRUCTION : 2010 CONTROL : Sinumerik 828D Technical data : Workspace Circumferential diameter over bed: 525 mm Circumferential diameter via cross slide: 384 mm Max. turning diameter: 250 mm Max. machining length: 750 mm X-axis travel: 175 mm Pgjc Eg S Rrjz Hl Eaegju Travel Z-axis: 537 / 787 mm Main spindle Spindle speed: 750–4,800 rpm Spindle holder: ASA A2-6 Spindle passage: Ø 62 mm Drawbar diameter: Ø 52 mm Front spindle bearing: Ø 100 mm Spindle cone: 1:20 Lining Size: 8 inches Spindle motor: 7.5 / 9 kW Optional according to the manufacturer: 9 / 11 kW Axles X-axis motor: 1.6 kW Z-axis motor: 3.0 kW Rapid traverse X-axis: 24 / 20 m/min Rapid traverse Z-axis: 24 / 20 m/min Guides: Linear / flat guides (depending on the design) Tool turret Baruffaldi powered servorreactor Tool stations: ...

Vertical CNC Manufacturing Center Chiron Mill 2000 Control: Heidenhain TNC 640 Year of manufacture: 2023 Internal machine no. 82 Travels: X-axis: 2,000 mm Y-axis: 895 mm Z-axis: 715 mm Clamping area: 2,600 x 910 mm Interference circle Ø: approx. 1,150 mm Mount: HSK-A63 Tool magazine: 40 – compartment Spindle speed: 50 - 12,000 rpm spindle Accessories - NC swivel head with headstock - Water-cooled motor spindle - Integrated rotary table Ø 500mm - Probe Blum TC54-10 - Coolant system KNOLL KF 400/900 - Chip conveyor KNOLL 600 K-3/4000 - 2 rinsing guns

Sweeper/ compact sweeper Bucher Citycat 2020 First registration 02/2020 approx. 6,440 operating hours + approx. 47,650 km Diesel engine 55 kW + hydrostatic drive good, ready-to-use condition Net price ex location 27,900,-- € + VAT Sale from location D - BL Saxony Code Q04

Hello, We offer you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled except for the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were renewed and the motors and gearboxes were checked. Singel-Deck Star Screen, fine, conveyor to Paper Spike: Manufacturer: Lubo Screening & Recycling Systems B.V. Type 330 (P.060) with brake Year of manufacture 2005 Drive power 2 x 3.0 kW Working point 2,040 mm Working length 3,400 mm Number of shafts total 14 pieces Speed 62 – 254 rpm. Tran ...

TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Description: Drainage bucket wheel Type: E 200 S Year of manufacture: 1970 (overhauled 1993) Diameter scoop wheel: 4,950 mm Cup width: 900 mm Number of cups: 22 pcs. Throughput: 120 to 150 t/h Drive power: 5.5 kW Gearbox type: STIEBEL flat head gearbox type S19 Total length of tray: 7,000 mm Total width of tray: approx. 4,500 mm Overall height: 5,440 mm Weight: approx. 17 to.

TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Description: Drainage bucket wheel Type: E 200 S Year of manufacture: 1970 (overhauled 1993) Diameter scoop wheel: 4,950 mm Cup width: 900 mm Number of cups: 22 pcs. Throughput: 120 to 150 t/h Drive power: 5.5 kW Gearbox type: STIEBEL flat head gearbox type S19 Total length of tray: 7,000 mm Total width of tray: approx. 4,500 mm Overall height: 5,440 mm Weight: approx. 17 to.

UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/ - 5%

with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome -plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx -d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

UV dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight -mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/ - 5 % Images are examples of a machine of the same design

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS III greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm  ...

turning diameter:410 mm turning length:500 mm control:Fanuc 21i TB standard turning diameter:275 mm travel -x axis:277 mm travel -y axis:82 (±41) mm travel -z axis:500 mm Spindle 1 RPM:4500 1/min Spindle 1 Power:18,5/18,5/15 kW Spindle 1 max. bar diameter:65 mm turret stations / rotary tool stations:12/12 Power rotary tools:5,5 kW RPM of rotary tools:6000 1/min total power requirement:39,2 kVA weight of the machine ca.:6,2 t dimensions of the machine ca.:3,1 x 2,0 x 2,2 m collet chuck:Hainbuch High precision Turning and Milling Centre with Y-axis. Machine was running with oil, not coolant. A fire extinguisher system is installed.

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

grinding diameter:280/320 mm grinding length:750 mm centre height:170 mm weight of the machine ca.:22,5 t dimensions of the machine ca.:4,7 x 3,65 x 3,0 m Junker Jumat 6S 18-20S-18 has 2 internal and 1 external spindle.

workpiece diameter:26 mm swing diameter:- mm workpiece length:66 mm total power requirement:12 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm

max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required.

grinding length:1370 mm grinding width:560 mm workpiece height:800 mm total power requirement:50 kW dimensions of the machine ca.:9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 365 U/min milling motor:37 kW ram head dimension:240 x 240 mm max. ram stroke:1250 mm total power requirement:133 kVA weight of the machine ca.:50 t dimensions of the machine ca.:11 x 5 x 6,4 m Machine was overhauled in 2008 by OEM New control CNC SIEMENS 840 D automatic tool changer 72-pcs C-axis with driven tools Angle-, straight tool holders with CAPTO holder Coolant device Chipconveyour

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden