mak 20 used for sale

sheet width: 2000 mm plate thickness: 3 mm rear stop: von Hand, 750 mm number of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 mm

Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm

Stock# UG6392 Automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.

Inv. Num. : 8711 Type: MG 2000 x 25/20 Producer: Maqfort Created: 1998, GO 2016 Parameters: Working length rollers: 2000 mm Max. sheet thickness: 25 mm

Key data: 1200 KW, 1850 kVA, 400 V

MWM TCG 2020 V12 Containerized Biogas year 2012 hours 21.000 total running hours 50hz, 1500rpm, first container -new engine is changed in 2018 second container engine year 2012 size container : 300cm wide x 320 high x 1200 long 26.000kg gensets containers are located in our yard: Kranenpool 10 6443VA Brunssum NL

Key data: 400 KW

Gas type natural gas Capacity 400 Kw Engine brand Caterpillar 50 Hz , 400 V Performance class G2 Alternator Marelli

Key data: 1200 KW, 1850 kVA, 400 V

MWM TCG 2020 V12 Containerized Biogas year 2012 hours 21.000 total running hours 50hz, 1500rpm, first container -engine is changed in 2018 second container engine year 2012 size container : 300cm wide x 320 high x 1200 long 26.000kg

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine Type: Punching/Nibbling Machine Manufacturer: EDEL Type: Micromat 205 Year of manufacture: coming soon Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-EDE-0925 DESCRIPTION We offer you a used punching / nibbling machine from the manufacturer EDEL. Available now Technical data and accessories will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Croissant line RONDO, type: SCL - Calibration head - Cutting unit with cutting rollers and guillotine - Winding unit - Comfortable dough weight, seamless dough sheets, relaxation - Cutting separation of the cut-out dough moulds - Gentle winding without pressure on the laminated dough - tightly and loosely wrapped croiccants - Power: Up to 900 pcs per row - Condition: Very good, ready to use - Video in function can be sent Inspection and test run are possible by arrangement.

Key data: 400 mm, 200 mm

Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic clamping plate 400 x 175 mm -Hydraulic - Coolant device -Bandpass filter - Automatic transverse stroke not functional - Year of construction 1988 Specifications - Grinding area: 400 x 200 mm - Height adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: 200 x 25 x 51 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions WxHxD: 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg

YASKAWA MOTOMAN AR 2010 robotic welding station was built in 2022 in Japan by Yaskawa Electric Corporation. The system is used for precision arc welding of workpieces with even the most complex geometries. All the components of the station are integrated inside an enclosed structure. The robotic welding cell is fully complete and consists of the following components: – robot arm: YASKAWA MOTOMAN AR2010 – controller: MOTOMAN YRC1000 – welding positioner: YASKAWA H-2000D (2 pcs.) – welder: LORCH – light curtains: PANASONIC – torch cleaning station: BRG-2000 D – control panel The machining process is performed by a YASKAWA 6-axis robot, which is distinguished by, among others, its clever design and robust arm with an increased range of movement. Its compact, slightly curved design enables efficient working in a small amount of space without the risk of collision w ...

Manufacturer: Ascojet Model: 2001RX Type: Dry Ice Blasting Machine Operating pressure: up to 10 bar Air consumption: approx. 3–6 m³/min Dry ice consumption: 20–80 kg/h Hours: 481 Condition: used Location: Bremen

A Hoyer three-phase asynchronous motor is available. Protection class: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. Including Lenze i550 frequency converter. On-site viewing is possible.

Ref. no.: 18092 Manufacturer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil fe ...

Key data: 264 KW, 450 kVA, 400 V

Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994

Key data: 610 mm, 1540 mm

Stock number: 3998 CNC LATHE Manufacturer: MORI SEIKI , Type: NTX 2000 / 1500 SZ MAPPS-IV CNC Year of Make: 2013 Specifications: Max. circumferential diameter 610 mm dia. Turning length 1540 mm Main spindle 4000 RPM - 26 kw Hole through drawing pipe 80 mm dia. Spindle bore 91 mm dia. C axis - head spindle movement 0.001 degrees X axis movement 675 mm Z ash movement 1562 mm Y axis +/- 125 mm mm B axis movement 120 degree - 0.0001 degree B axis spindle speed 12000 rpm B axis spindle effect 18.5 Sub-spindle 5000 RPM - 22 Kw Control MAPPS IV (MX711 ) 5 axis Fabr. Accessories: ATC Tool magazine with 76 stations Hydr. Chuck main spindle Kitagawa BB-210 - 250 mm/dia mm dia Hydr. Chuck Subspindle Kitagawa BB-208 - 200 mm/dia mm dia Car Door Chip conveyance. High pressure coolant pump 70 bar Measuring System Renishaw S ...

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

punkt-zu-punkt-Bohrmaschine mit numerischer Steuerung MASTERWOOD SPEEDY 207 für die kundenspezifische Möbelherstellung, Küchenmöbel, Badezimmermöbel und verschiedene Prozesse bohrkopf mit 5 unabhängigen vertikalen Spannfuttern und 1 doppeltem horizontalem Spannfutter säge für Längsschnitte maschinentisch mit 1390 x 750 mm Bohrkapazität und zwei seitlichen Hochfahranschlägen, die von der Steuereinheit gesteuert werden, um mit nur einem Programm und einem Zwischenhalt platten bis zu einer Größe von 2800 x 750 mm auszuführen möglichkeit zum Bohren von 2800-mm-Platten pneumatische Werkzeugverschiebung mm 60 max. plattendicke mm 50 drehzahl der spindeln U/min 4500 sägerotation U/min 6000 vakuumpumpenmotor PS 1.5 Saugnapfdurchmesser mm 80 frontanschlag komplett mit 4 Schließzylindern zum Bohren schmaler Werkstücke und Leisten multitasking-steuerung komplett m ...

Max. bending length: 1270 mm Max. sheet thickness: 1.75 mm steel Motorized upper bolster adjustment via foot switch Automatic backgauge

Injection moulding machine Krauss Maffei KM 200-1400 C2 BJ 2000

TECHNICAL SPECIFICATIONS Number of silos: 3 pcs. (identical) Capacity: approx. 200 cbm/pc. Diameter: 6,500 mm Silo body height: 8,500 mm Cone height: 4,000 mm Total height: approx. 10,500 mm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - At the cone precipitation drainage

APV high-pressure homogenizer., Maximum working pressure: 2000 Bar / 29,000 psi / 200 MPa , Nominal flow rate:: 11 litres/h , Minimum sample: 100 ml , Dead volume: 13 ml , ATEX: EEx e II T1%T6 / EE d IIC T1%T6

TECHNICAL SPECIFICATIONS Manufacturer: GfA Description: Circular swing screening machine Type: 2PP 6000/2000 Year of Make: 1991 Screen length: 6,000 mm Screen width: 2,000 mm Number of screen decks: 2 pcs. Drive power: 22 kW SPECIFIC COMMENT - Incl. drive, springs - Incl. material chute and outlet tray

Key data: 20000 kN

Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021

Key data: 800 V, 400

Complete CHP MWM 2016V16 C genset in sound-proof casing. Fuel - Natural Gas Capacity: 800 kW HZ: 50 V: 400 Scope of Supply: Engine, Alternator (Marelli), Control Panel, Gasline, Heat Exchanger, Flue gas cleaner, Soundproof casing, Frame. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8) transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - .ucymachines/ Contact us at - sales@ucymachines

welding current: 10 - 200 A connected load frequency: 230 V weight: 6,5 kg Dimensions (LxWxH): 380 x 120 x 250 mm TIG Welder AC/DC, Pulse Demo unit in aluminum box Includes all accessories See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

Meat grinding machine Manufacturer: Sind Voltage: 380V / 50Hz

A Klotzki spiral crate washing machine for open plastic beverage crates is available. Crate dimensions X/Y in longitudinal flow: 400mm/300mm, crate dimensions X/Y: 200mm/300mm, crate height range: 270mm-300mm, conveying direction: cross flow, throughput capacity: 1500-2000crates/h, treatment section: approx. 34m, number of units: 48pieces, material: stainless steel, treatment time at 1700 and 2400crates/h: approx. 91s/65s, crate infeed height: 1100mm, crate outfeed height: 4100mm. Machine dimensions X/Y/Z: approx. 3000mm/2000mm/5000mm, weight: approx. 1500kg, control system: Logo. Without platform. The crate indexing and spraying units may need repair. Documentation available. A visit on site is possible.

pressure: 60 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 255 mm stroke: 165 mm dayligth: 475 mm working feed: 9,8 mm/sec return speed: 117 mm/sec ajustment speed: 150 mm/sec total power requirement: 5,5 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injector Model: BI 204 C Manufacturer: Inject star Stainless steel Power: 9kW Voltage: 3 x 400V/ 50Hz

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.

Offer 25146 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 6 m - EWM water-cooled burner package with 4 m extraction function - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Offer 25147 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 5 m - Burner package water-cooled with suction function 4 m - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm

Key data: 2000 mm, 500 mm, 550 mm

Specifications: Manufacturer: Chiron Type: Mill 2000 high speed Control: Heidenhain TNC 530 Year of Make: 2013 Travels: X 2,000, Y 500, Z 550 mm Working spindle Speed: 12,000 rpm Start table Dimensions L/W: 2,600 x 550 mm Table load: 1,000 kg Tool/movement Tool holder: SK40 Tool changer: 40-fold Measuring system: direct X/Y/Z Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Preparation FK7 Loading automatically "opening and closing" Tub flushing

Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!

Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!

Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Laser cutting machine Type: MSF 4001.20Ltk+T500 4kW IPG Manufacturer: MicroStep Year: 2016 Working area: 4000 x 2000mm + space for pipe cutting Laser: 4000 W IPG Linear guides Rexroth Gear racks Precision helical gears ATLANTA on all axes, double-sided driven portal STOBER gearboxes Drives maintenance-free, processor-controlled AC-servos Panasonic Max. positioning speed 130 m/min - one axis, 180 m/min simultaneously 2 axes. Acceleration 10 m/s2 Z-axis positioning speed 50 m/min Z-axis travel 150 mm Z-axis acceleration 0.75 G Position deviation Pa 0.07 mm in accordance with VDI/DGQ 3441 Repeat return accuracy Ps 0.03 mm in accordance with VDI/DGQ 3441 Ambient operating temperature +10 °C to +35 °C Relative humidity 0 to 90 % Machine in very good condition, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 4000 mm, 2000 mm

Cutting surface: 2,000 x 4,000 mm Top height: 290 mm Weight: 5 ton

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Recon Part Number: 1231 3041 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.

A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 210 Lenght: 170 Height: 190

Clamping Force: 200 ton