main engine mak used for sale

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Key data: 230 mm, 460 mm, 25 U/min

Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...

Key data: 1320 KW, 1800 1/min

Due to new engines, this MTU type 12V4000 M60 and the Reintjes gearbox type WAF 763L with a rating of 5,750: 1 half May 2026 is available. The shooting hours is dan Umnabei 64.000 Cylinder head overhauled at 30,000 hours of filming

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 28,330

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 18,701

Engine type: Petrol, V-shaped, 8-cylinder. Power: Usually around 150 horsepower. Application: Used on ZIL-130 and ZIL-131 trucks. There are also other engines from tractors and trucks of Soviet production

1 -NO EXCHANGE cylinder head (overhauled) type 3 Jenbacher. cod. 9016986 Already overhauled and ready to use 2 -reUp exchange cylinder head (overhauled) type 3 Jenbacher. Jenbacher cod. 9016986 In this case you will have to return the used cylinder head to us. = 700 € CAD. EMAIL: administration@punto4srl

There are also other engines from tractors and trucks of Soviet production

Key data: 1140 KW, 2250 1/min

Used MTU 16V2000 M72 – Port Side – Available Now Well-maintained MTU 16V2000 M72 marine engine from 2013 and strong remaining lifetime. A reliable high‑performance choice for shipowners, operators, and shipyards seeking a proven propulsion solution. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 111 995 Configuration: Port Side Year of Manufacture: 2013 Power Output: 1440 kW Rated Speed: 2250 rpm Weight: 3550 kg Operating Hours & Service Status Total operating hours: 31,427 h (as of 12/2023) QL4 major service completed: 09/2022 at 26,537 h Remaining hours before QL3 service: approx. 1,100 h TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is dry, complete, and in good technical condition. It has been operated in a professional environment with continuous maintenance and is ready for inspection and quick delivery. Key Advanta ...

We offer new parts for sale for Yanmar Motor 3TNV88F (electronic regulator): All prices per piece in Euro plus freight+plus tax available from stock 1xECU unit NEW 129017-75040 net 750,- 1xCrankshaft NEW 129008-21000 net 750,- 1xOil pump NEW 129001-32002 net 250,- 1x Exhaust muffler with manifold net 300,- Many more new parts available on request at MIW GmbH Engine Repair Plant Nord-West-Ring 8 D-27404 Zeven-Germany Phone:0049(0) 4281-950583 Mail:infomiw-zeven.de

Key data: 1140 KW, 2250 1/min

Used MTU 16V2000 M72 – Starboard Side – Available Now Reliable and well‑maintained MTU 16V2000 M72 marine engine recent QL3 overhaul with minimal operating hours since. A strong option for shipowners, operators, or shipyards looking for a robust and ready‑to‑install propulsion engine. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 110 966 Configuration: Starboard Side Year of Manufacture: 2013 (visible on nameplate) Weight: 3560 kg Operating Hours & Service Status Total operating hours: 28,597 h (as of 12/2023) QL4 major service completed: 03/2022 QL3 overhaul completed: 10/2023 Running hours since QL3: Very few TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is complete, dry, and in excellent technical condition due to the recent QL3 overhaul and minimal runtime afterward. Ready for inspection and immediate delivery. Ke ...

Key data: 809 KW

Complete and overhauled. Engine no.: 1214417 Engine Perf. code: 2411048

Key data: 1140 KW, 2250 1/min

Engine disassembled. Block and crank shaft damage. Can be sold in single part or all parts.

Key data: 1000 KW, 1800 1/min

Cummins K38‑M marine diesel engine, Engine No. 26433858, manufactured 16/03/2018, built to CPL 4291 and Rating No. 5376382. The engine is recently overhauled and has 9000 operating hours, offering a reliable 38‑liter V‑configuration with mechanical PT‑fuel system and robust continuous‑duty marine performance.

Key data: 1000 KW, 1800 1/min

New. Located at Cummies dealer in Esbjerg, thus no photos.

trailer with 3 Cummins generators 300 kva 180 kva 60 kva

Used SCANIA DC16 in parts Cylinder heads completely overhauled Missing: - Starter - Alternator - Crankshaft - Engine block - Camshafts

turning diameter over bed: 430 mm turning diameter over slide rest: 230 mm turning length: 1000 mm centre height: 215 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 19 - 2000 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,9 t dimensions of machine L x W x H: 2,78 x 1,25 x 1,40 m Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW spindle turning speed - stepless: 30-3000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

Motor bracket, electric motor bracket, motor bracket, electric motor bracket, motor bracket, motor bracket, plummer block housing, plummer block housings, bearing block -Length: 400 mm -Width: 367 mm -Height 90 mm -Support arms: adjustable - Dimensions: see photos -Quantity: 3 motor mounts available -Price per piece -Weight: 16.5 kg

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator, gas pressure regulator, electro-hydraulic drive, servo motor, motor valve -Manufacturer: Dungs, engine valve unused OVP -Type: DMK 507 diam. 15 Item No. 222620 -p max.: 500 mbar -Number: 3x valve available -Price: per piece -Dimension box: 120/90/H55 mm -Weight: 0.4 kg/piece

Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Petrol engine, hydrant key, hydrant wrench, underground hydrant key -mobile transmission: with gasoline engine -Petrol engine Manufacturer: Honda Type: GX -was used as: hydrant key -Gearbox speed: 1-30 rpm -Features: Digital display, revolution counter, forward/reverse rotation -Wavelength: 520 mm -Square drive: 40 x 40 mm -Dimensions: 1400/800/H1160 mm -Weight: 132 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter, motor controller, servo drive controller -Manufacturer: Festo, Motor Controller -Type: CMMS-AS-C4--3A G2 572986 -Number: 6 controllers available -Price: per piece -Dimensions: 310/60/H180 mm -Weight: 1.4 kg/pc.

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: -Groove width: 14 mm, length 360 mm -Hole spacing: 460 mm / Ø 16 mm -Number: 4x tension rail available -Price: per piece, minimum order 2 pieces -Dimensions: 505/55/H65 mm -Weight 3.0 kg/piece

Speed control unit, speed controller, controller, motor controller, motor control, motor control controller, motor controller Manufacturer: Ott, Motor control motor controller -Type: K10024-02 -Motor control: M-BL-10-24 -Number: 2 controllers available Price: per piece -Voltage: 15VDC to 30VDC -Dimensions: 75/45/H105 mm -Weight: 0.2 kg/pc.

Used engine few hours Very good condition !

Key data: 900 KW

Make: Caterpillar Model: 3516E Mfg year: 2021 Condition: Unused Serial Number: ND900120 Arrangement Number: 5593393 Power: 900 kW Located in the USA

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 600 mm weight of the machine ca.: 400 kg spindle passage: 26 mm speeds: 55-2000 U/min total power requirement: 1,4 kW dimensions of the machine ca.: 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 350 mm swing diameter over face slide: 200 mm centre distance: 800 mm centre height: 175 mm turning length: 700 mm 3-jaw chuck: Röhm Ø 160 spindle bore: 46 mm spindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/min tailstock quill taper MT: 3 weight of the machine ca.: 1000 kg 3-axis digital readout manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED GAS TURBINE ENGINES 17 UNIT -GOOD CONDITIONS CUMMINS AND

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

1x Engine D13B-N MH (FE), Serial Number: 10132024097 - 1x Twin Disk Ship Reversing Gear, Serial Number: 2437795 - 1x Phyton-Drive, type P501-L-80, for 80 mm shaft incl. adapter flange for MGX 5114 - SFK bearings (HEPA) - 1x Automatic lubrication system for shaft system - 1x intermediate shaft (Stuth), incl. 2x shaft flange, incl. 6x shaft pins, incl. 2x keys for intermediate shaft - 1x pillow block housing - 1x spherical roller bearing - 1x Clamping sleeve - 2x fixed ring - 1x four-lip seal for housing Volvo warranty extension until December 2025

Key data: 333 KW, 1500 1/min

Was used as a power generator. The generator broke, the customer bought a new one! Built in 2015. Hours : 4600 Normal state No sardines ! More pictures by mail.

We are selling here a refurbished cylinder head from M.A.N. . For: E2842 LE322,

Key data: 1000 KW, 1500 1/min

Deutz/MWM TBG 620 V12k Maker: MWM/Deutz Type: TBG620 V12k Fuel: Natural gas Power rating: 1000 kW Year of manufacturing: 2000 Alternator: (0,4 kV, 1175 KVA 50HZ, 1500 RPM) Running hours: 40 000 Turbocharger: ABB TPS 52 Engine control system: TEM-EVO-1 SCOPE OF DELIVERY: Engine Alternator Base frame Heat exchanger Transformer (1250KVA, 20/0,4kV) Control panel Gas street History: Well maintained set, good condition. All regular service has been done by local OEM company. Engine stopped since 2022 , April.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.