main engine mak used for sale

Piston spindle injector, brand: Main Group, model: Mode10 Booster 4, 4 seats. Two injectors, press measurements: 580 X 470, 120 Tn closure, year: 2001.

Container facility consisting of: = 8 pieces of mobile space elements, dimensions 6,058 x 2,438 x 3,000 mm, IH 2,500 mm, 2 pieces of mobile space elements, dimensions 4,891 x 2,438 x 3,000 mm, IH 2,500 mm - with all electronics, heating, kitchen, etc. - Built in 2018 and was used for 4 years gas heating has been installed in the equipment. In addition, there are two air conditioners

Height=1.14 m, Overall length= 0.47 m, Overall width= 0.5 m, Net weight= 126 kg,

Trumpf Motherboard Control Board DELEM DA 65/69 SNA 4891 Control Motherboard Board DA 65/69 Trumpf bending machine built 2001-2004 including flat screen and front control panel

Extrusion line for drip irrigation

Unused main shaft for a Westfalia separator. Article number: 2231 3400 020., Type of Machine: Main Shaft, Drive line: 50 Hz, Condition: Never used

Main shaft for an Alfa Laval MRPX 214 TGV or MRPX 413 SGV Separator., Type of Machine: Main Shaft, Drive line: 50 Hz

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

3 x Mak 9M25 engines Available from stock 2850 Kw at 720 Rpm in good condition From our stock in Turkey

MAK 8M32C Engine Block In Reusable condition

MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven-Germany Tel:(0049)(0)-4281-950583 Fax:(0049)(0)-4281-950585 abc.miw-zeven.de e-mail:info@miw-zeven

Crankcase (engine block) Deutz TBG 620V12K

SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002

; Mileage [km]: 6; Power [PS]: 5; Engine: DAF LONG-BLOCK

; Mileage [km]: 6; Power [PS]: 5

Mitsubishi S16R- MPTA Marine engine rebuild in 2013

; Mileage [km]: 6; Power [PS]: 5; Engine: MAN NEW ENGINES

; Mileage [km]: 4; Power [PS]: 5

; Mileage [km]: 6; Power [PS]: 5; Engine: DAF MARINE

; Mileage [km]: 6; Power [PS]: 5; Engine: DAF NEW PARTS

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1

The following materials are available: Cover Liner Piston Water Jacket Connecting Rod Fuel Pump Any Parts

Perkins 1100 Series 1103A-33TG2 60.5 kW / 85,8 hp @ 1500 rpm; Power [PS]: 82; Transport weight [kg]: 420

Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

AT-Motor Scania Typ=DC12 Pumpe-Düse komplett ohne Anlasser+Lichtmaschine. 1 Jahr Garantie,337KW bei 1.800 U/min.Für Notstrom+BHKW Anwendungen. info@miw-zeven.de

Austausch-Motor Actros DB OM 501LA-430 PS generalüberholt auch ohne Altteilrückgabe,geben Aufpreis,zu verkaufen.1Jahr Garantie info@miw-zeven.de

Scania Austausch-Motor Typ= DI12-54A-PDE-Steuerung 242KW Aldrehzahlmotor incl.Anlasser,Lichtmaschine.Auch für Pflanzenölbetrieb geeignet. info@miw-zeven.de

AT- Motor Caterpillar Typ= C13-LGK... mit 385 PS bei @2.100 RPM komplett einbaufertig mit Starter,Lichtmaschine Alter Motor MUSS Bruch-und Rissfrei sein Fotos können auf Anfrage gesendet werden. MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany MIW-Zeven.de E-Mail:info@miw-zeven.de Tel: 0049 (0) 4281-950583 Fax: 0049(0) 4281-950585

Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C

Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Crucible melting furnace, make VEI type: SO_EB_BU Temperature: 300°C - 1250°C

gas-fired preheating furnace type: KA_GB working temperature: 600°C max. allowed furnace chamber temperature: 750°C cennected load (el.): 2,5 kVA gas pressure: 60 mbar gas type: natural gas heating power: 130 kW (max. 150 kW) external dimensions (approx.) (w x h x d): 2000 x 3530 x 2500 mm useable dimensions (w x h x d): 1100 x 1330 x 1500 mm

The pictured furnace is a circulation chamber furnace. The furnace drives under a nitrogen atmosphere and acts as a stabilizing furnace e.g. for copper alloys. Furthermore, the products are scanned by a scanner located outside the cabinet and for the various products different programs can be stored. The controller automatically performs, provided for the product program. usable dimensions (w x h X d): 1000 x 1400 x 1300 mm temperature: 300°C, +/- 2K heating power: 72 kW

electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200°C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

Chamber furnace Usable dimensions (W x D x H): 1250 x 900 x 1500 mm Max. Temperature: 350°C Electrical connection value: 60 kVA

MAN head, for engine 28/32 REVISED

for format 132 cm

Electrically heated furnaces with conveyor belt (for non-explosive substances) TECHNICAL DATA temperature max.: 420°C working temperature: approx. 350°C total power consumption: 60 kVA heating power: 48 kW drive: 0,55 kW air circulators: 2 x 4 kW number of control groups: 2 external dimensions (approx.): length: 8500 mm width: 1800 mm height: 2625 mm useable dimensions: conveyor belt width: 900 mm clear height: 150 mm heated length: approx. 7200 mm

Electrically heated air circulation chamber furnace (horizontal airflow) maximum temperature: 650?C useable dimensions (W x H x D): 1000 x 1000 x 2000 mm heating power: 72 kW circulation fan: 1 x 4 kW