main engine mak used for sale

Starter air Ingerssol overtaken edge

Piston diesel operation - almost new

Key data: 50 kg

Say-Mak SPH 50 - Pneumatic Forging Hammer - Welded steel structure - Regular beating with valve adjustment - Pneumatic working system with 2 pistons -Hour meter - All dies and Sal-Block replaceable, Sal-Block adjustable in 8 directions - Adjustable sal block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - Incl. steel foundation Specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

RECON Part number: 9.1110-007 - with old GL stamping - Price depending on measurement between 800€ and 1400€ ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON - with cooled exhaust seat rings - heavy fuel ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON - with uncooled seat rings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

2930-12-334-9277 / 0052000675

2930-12-A07-0048 0030982820

2930-12-378-7717 5260981120

2930-12-378-7720 5260981220

Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340

Siemens Gas Engine Guascor HGM 560 Siemens Gas Engine Guascor SFGLD 560 Orginal Part Number 7673532

General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

MTU 12V396 SE TE94 INTERCOOLER NATO STOCK KODE 2930-12-A07-0048 ORIGINAL PART NUMBER 0030982820 DIDAR MAKINA PART NUMBER 2605710002

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

Recon Part number: 3.2107 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

MAK 6M20 crankshaft Condition: Refurbished Part number: 1.13.7-25.1001-01 and 1.13.7-25.1000-11 - all base pins are standard size (180mm) - all connecting cones are 1st stage undersize ground (151,50mm) - incl. gear and counterweights - incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We are happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200

: 330 mm : 5000 mm : 450 mm : 330 mm : 450x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 325 mm : 4380 mm : 400 mm : 325 mm : 400x325 mm dimensions of saw-band: 4380x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hazar Makina HM625 Transfer Printer Year of construction 2021 Model 600 Print width: 2000 mm Diameter of the calender cylinder: 625 mm Electrical power: 40 kW. Electrical power in one hour: 18 kW Heating system: Fuel oil (surface heat distribution is even.) Machine Control Panel: 7 inch LCD PLC System Cooling System: Automatic Resistance power: 30 kW Engine power: 2.2 kW Heat-up time: 70 minutes Sealing Clamping and Guide System: Automatic (Pneumatically Controlled Linear Slide) Heat control of cylinder: Outer and inner surface double automatically checked. Printing speed: 3-7 meters in minutes Felt: Nomex Item Condition : Exhibition Piece

MAKA

SENTE MAKINA HDTF-SI tube forming machine was built in 2022 in Turkey by SENTE MAKINA İNŞ. SAN. VE TIC. LTD. ŞTI. The machine is used in the HVAC industry for the production of precision ventilation ducts, compliant with Eurovent and Smacna standards. Spiro ducts are created from thin sheets of metal with a maximum thickness of 1 mm. The innovative cutting system eliminates the noise and hot sparks typical of traditional saws, guaranteeing smooth edges without the need for additional deburring. The HDTF-SI duct forming machine weighs 2480 kg. The SENTE MAKINA spiral duct machine is fully complete and consists of the following components: – main frame – sheet metal decoiler – forming heads (2 pcs.) – cutting system – stitching roller system for different sheet thicknesses – unloading table (2 pcs.) Technical data of the SENTE MAKINA HDTF-SI spiral tube machine  ...

MAK 8M552AK Crankshaft for Sale MARKING 1.74 .6 -25.10.01-50B 101373 221361 CK 45/50 DB 7295 DB LLOYDS DSF 601 966 15.10.76 7295 LLOYDS 62300 D 10 GTL .76 7295 A B ES 73826 10.76

We have 2pcs MAK 6M20 standard Crankshafts in our stock available for Sale. MARKING 1) 34072 221 6916 34crNi Mo6v 86026 GL 1517 LLOYDS BER500241 51981B 653009 2) 24072 221 6915 34crNi Mo6v 86026 GL 1513 LLOYDS BER500585 51981B 653007

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

Mak 6M20 Cylinder Head Very Good Condition for sale.

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Demolition hammer, chisel hammer, Bosch hammer, mortise hammer, pointed chisel -Length: 410 mm -Width: 36 mm -Hexagon socket: 30 mm -Price: per piece -Number: 6 pieces -Dimensions: Ø 46 x 460 mm -Weight: 1.7 kg/piece

Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

We have Mak M20 Cylinder Heads for sale in our Stock Ex-Works. CONDITION: Old, Used in Good Condition with Pressure Tested

Makra Edge Deburring Machine KEG 150 further inventory and ALL prices at: inventar-verkauf.de/id/alesco An efficient and durable edge deburring machine that is suitable for both professional and DIY enthusiasts. With a power of 1050W, this device offers outstanding performance for all kinds of deburring tasks. The infinitely variable speed control allows a maximum speed of up to 25,000 rpm, which enables precise and fast deburring work. The device is used, but has a long service life due to its robust construction and excellent performance. The KEG 150 is a versatile and powerful tool that meets all your edge deburring needs.

Müro paper milling machine; Condition New; Makita machine; Connection to the milling head for suction.; for milling blocks; 5 pcs. available. Paper mill Müro; condition new; Makita nachine; connector at the milling head for dust suction; used for milling blocks; 5 pic. on stock.

Year of construction: 2016 CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40 Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 Spindle Spindle speed rpm: 14000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: Pinza doble Max. Tool Diameter 70 With occupied neighboring places mm: 140 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Measuring probe Machine running times Under power: 63813h Spindle Working: 30592h Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200  ...

Recon 67/15/20/6-ESV-S99-20K192 15.5l 6bar tube 2.5bar shell ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon 944768/20-2123 Draw B20-10-164 10bar shell/5bar tube Test 15bar-7.5bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon 994730 Built in 1994 1941/2200 l/min 400/450 L/min 10bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details.

size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 12000 U/min rapid traverse: 50 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.