128,877 used machines on RESALE, but how to find them? Machine Search
This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information.
Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. The machine has no controls anymore. Documentation available. On-site inspection is possible.
CNC controller: SIEMENS 840D solutionline Operate Axes X-axis travel mm: 630 Y-axis travel mm: 800 Z-axis travel mm: 850 Worktable Number of pallets: 12 Table dimensions mm: 500x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Tool system Tool holder: HSK-A63 Tool magazine slots: 303 Equipment Chip conveyor Rotating inspection windows Rinsing gun Blowing air through spindle center selectable via M-function High pressure pump Tool breakage probe Coolant gun MPC – Machine Protection Control Infrared probe CE Round pallet storage Cooling Cooling through the Spindle Center bar: 80 Tank capacity: 980 Machine running times Under power: 46048 Spindle Working: 29258
A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.
Key data: 635 mm, 510 mm, 460 mm
Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.
Key data: 400 mm, 375 mm, 250 mm
With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.
This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information.
Manufacturer: Deckel Maho Model: DMC 100 U duoBLOCK Year of Manufacture: 2011 Find more here - / Contact us at -
This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information.
x-travel: 1.800 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 25 / 35 kW max. Torque: 130 / 87 Nm tool taper: HSK A63 DIN 69893 swivellable: B: +/- 100 ° work table:: table surface area: 2.100 x 700 mm max. table load: 1.500 kg number of T-slots: 7 NC-Rotary table:: table diameter: 750 mm max. table load: 500 kg number of T-slots: 7 rotatable: C: 360 ° tool magazin:: number of toolpositions: 30 pos. tool taper: HSK A63 DIN 69893 max. tool weight: 6,0 kg max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change-time chip to chip: 7,6 sec feeds:: rapid traverse ( X / Y / Z ): 40 m/min Accelaration: 4 m/s² feed speeds: max. 40.000 mm/min Feed force ( X / Y / Z ): 8 kN total power requirement: 70 kVA weight of the machine ca. ...
This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, travel distances of X 800mm, Y 650mm, and Z 550mm. It includes a 24-fold changer and an internal hard drive. Installation dimensions are approximately 2x3m. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 80E machine we have for sale. Contact us for more information about this machine.
The machine is in good technical condition, testing is possible after prior agreement. The tool magazine does not work, manual shifting is necessary, otherwise problem-free operation
This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information.
This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine.
Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Feed rates m/min: 80/50/50 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø500x380 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and di ...
This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions.
Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Chip conveyor
This 3-axis DECKEL MAHO DMU 50 evo was manufactured in 2001. It features an 18000 rpm spindle and a machine table measuring 800x480 mm. With travels of X: 500 mm, Y: 420 mm, and Z: 380 mm, this vertical machining center represents a robust opportunity for precision machining. Reach out for further details regarding this vertical machining center.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions
This 3-axis DECKEL MAHO DMU 80T vertical machining center was manufactured in 2002. Ideal for precision machining, it offers robust construction and reliable performance. Consider the opportunity to buy this DECKEL MAHO DMU 80T vertical machining center. Contact us for more information.
Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26 ...
This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information.
x-travel: 500 mm y-travel: 500 mm z-travel: 420 mm Control: Heidenhain / Millplus total power requirement: 35 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table surface area: 940 x 510 mm spindle taper: SK 40 spindle turning speed range: 32 - 1600 U/min feed - longitudinal/cross: 8 - 400 mm/min feeds vertical: 4 - 200 mm/min total power requirement: 4,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information.
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: Sinumerik 840 D SL Siemens Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 83 / 57 Nm tension force: 8 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - distance: 100 mm T-slot - width: 4x 14H12 / 1x 14H7 mm max. table load: 600 kg table height over floor: 720 mm distance spindle nose and table: 120 - 580 mm Tool-Presetter:: number of toolpositions: 30 pos. Max. mould width: 80 / (130) mm max. tool length: 250 mm max. tool weight: 6 kg max. total weight: 80 kg change-time tool to tool: 1,6 sec change-time chip to chip: 6,0 sec feeds:: rapid traverse: 30 m/min feed speeds: 1 - 20.000 mm/min Feed force: max. 5 kN total power requirement: 28 kVA weight of the machine ca.: 3,8 t dimensions of t ...
This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 600 Z 700 Speed range: 0 – 12,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Swivel rotary table 0 630 mm Swivel milling head ( Horizontal + Vertical ) Universal tool changer with 60 magazine positions as a double gripper ( SK 40 ) Full protection cabin with sliding doors and interior lighting 50 pcs SK 40 tool holders IKZ – 40 bar Chip conveyor Rotoclear 3 D Probe Heidenhain Electronic handwheel Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Operating Instructions THE MACHINE COMES FROM AN INSTITUTE AND IS IN TOP CONDITION POWER-ON HOURS: 29496 hrs PROGRAM HOURS: 10050 hrs.
This 5-axis DECKEL MAHO DMC 70 Evo was manufactured in 2007. It features a HEIDENHAIN TNC 530 CNC control, HSK 63, and a spindle speed of 15,000 rpm. Includes a pallet changer with a size of 500 Ã 500 mm and a high-pressure through-spindle coolant system. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMC 70 Evo machine we have for sale. Contact us for more information about this machine.
2 x die-sinking EDM machines Maho Hansen HS 350 E and HS 300E built in 1990
This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine.
Universal machining center DMU DECKEL MAHO 125P hi-dyn
This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine.
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:1,035 mm Y-axis travel:560 mm Z-axis travel:510 mm X-axis rapid traverse:30 m/min Y-axis rapid traverse:30 m/min Z-axis rapid traverse:30 m Y-axis feed length:560 mm Z-axis feed length:510 mm X-axis feed:30 m/min Y-axis feed speed:30 m/min Z-axis feed speed:30 m/min Rated (apparent) power:17 kVA Torque:83 Nm Controller manufacturer: Sie 137 mm Overall width:3,355 mm Table width:560 mm Table length:1,200 mm Table load:1,000 kg Overall weight:4,250 kg Spindle speed (min.):20 rpm Maximum spindle speed:8 000 rpm Tool operation:20 Tool length:300 mm Tool diameter:80 mm Tool weight:6,000 g Equipment:documentation / manual, chip conveyor, infinitely adjustable speed
This 5-axis DECKEL MAHO DMC 60 Hi Dyn was manufactured in 2002. It features a HEIDENHAIN MILLPLUS CNC, pallet dimensions of 630 x 500 mm, and a magazine capacity of 60 tools. The spindle taper is SK 40, and it includes internal coolant through the spindle at 40 bars. Consider the opportunity to buy this DECKEL MAHO DMC 60 Hi Dyn vertical machining centre. Contact us for more information.
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 120 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 IKZ 40 bar with paper belt filter Chip conveyor 3 D Probe BLUM tool measurement in the work area Signal light 4 colour DMG Automation PH 150/8 16 pallets with Allmatic + Lang vises Coolant Setup BEMA Coolant Nozzle 4 Height Adjustable Machine Shoes Operating Instructions
This 3-axis DMG DECKEL MAHO DMC 635V vertical machining centre was manufactured in 2007. It features a tool holder SK 40, a 32-position random tool changer, and a spindle speed of 10,000 RPM. The machine dimensions include a 790 X 560 mm table surface and a load capacity of approximately 600 kg. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine.
BAZ lid Maho DMF 250 linear BJ 2002 BAZ Cover Maho DMC 63 H BJ 2002
This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine.
Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operati ...
This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2002. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 Ã 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information.
Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Un ...
This 5-axis DMG DECKEL MAHO DMC 125U was manufactured in 2002. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 125U universal machining centre. Contact us for more information.
x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. Its a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine.
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 14.000 min/-1 power capacity - main spindel: 18,9 / 14 kW max. Torque: 100 / 74 Nm tool taper: HSK A 63 NC-Rotary table:: table surface area: 630 x 500 mm max. table load: 200 kg Swivel range: -110 / +5 ° rotation range: 360 ° T-slots: 7x 14 x 63 mm tool magazin:: number of toolpositions: 30 pos. tool taper: HSK A 63 max. tool weight: 6 kg max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm feeds:: rapid traverse: 24 m/min Feed force: 4,5 kN feed speeds: 1 - 24.000 mm/min total power requirement: 26 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,5 x 3,5 x 2,8 m Documents: Coolantsystem: elektr. hand wheel: tool setting: Heidenhain TT 140 Operation mode 4: Signal lamp - 4 colour: Chi ...
This 4-axis DECKEL MAHO DMC 60 H Hy Din horizontal machining center was manufactured in 2001. It features a robust direct drive motor with speeds up to 15,000 rpm and a torque of up to 191 Nm. The machine includes a versatile tool magazine with capacities ranging from 40 to 180 tools and a maximum tool weight of 12 kg. Ideal for complex machining tasks, the DECKEL MAHO DMC 60 H Hy Din machine we have for sale. Contact us for further details.
This 3-axis DECKEL MAHO DMC 64 V Linear was manufactured in 2004. A vertical machining center featuring a Heidenhain touch probe, iTNC 530 control unit, and a chip conveyor. It offers rapid traverse up to 100 m/min and X, Y, Z travel of 640 x 600 x 500 mm. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMC 64 V Linear machine we have for sale. Contact us for more information.
maximum number of results exceeded
please refine your search
