1119 offers

maximum number of results exceeded > 1000
please refine your search

Category: 102: lathes
New in: 1999
Price: request quote
Location: Land-de DE
Seller: RG-Tools GmbH

CNC multi-axis turning - milling center with Portal machine's group: CNC turning and milling center Manufacturer: OKUMA Type: LT 25 M 2pcs 300 year of build: 1999 Control: OSP 7000 L with IGF one touch Power-on hours: 80239 h Cutting time: 16516 h Country of origin: Japan Delivery time: Please enquire Cargo base: EXW Technical data Rotary diameter: 300 mm Turning length: 300 mm Control: OSP 7000 L with IGF one touch Distance between centers: 1524 mm Swing over bed: 500 mm Main spindle: Speed range - main spindle: 30-3800 U / min Drive power - main spindle: 22 kW Spindle bore: 65 mm part hollow voltage C-axis: 0.001 ° Counter spindle: RPM - spindle: 30-3.000 U/ ...

Category: 205: boring mills, machining centers
New in: 1997
Price: request quote
Location: Land-be BE
Seller: Vebim

working width: 260 - 3090 mm workpiece thickness: 10 - 70 mm digital positionning width Drilling: 2 bottom units, split heads dowelinserting: 1+1 Dowelmagazine with shaker and 5 exits 1+1 Separator for 5 dowels 5+5 Glue guns with dowel inserter

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-it IT 23801 Calolziocorte, via serta 23
Seller: Industrialbay

Control Type Heidenhain 410 X axis travel 1020 mm Y axis 510 mm Travel Z-axis 575 mm tool magazine 30 positions Spindle speeds 80-8000 rev / min Water through the tool / high pressure ISO Tool Cone 40 mm Motor power 12/16 kW Advances in rapid: 24 m / min. Control Flyer Hot Chip collection Year of installation 2002 CE Weight: Kg. 7,500 Complete with all the documentation

Category: 209: other wood working machines
New in: 2009
Price: request quote
Location: Land-be BE
Seller: Vebim

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 2 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Buffing Automation package straight/cha ...

Category: 101: boring mills and machining centers
New in: 2012
Price: request quote
Location: Land-de DE 89547 Gerstetten, Charlottenstr. 6
Seller: Luhan Werkzeugmaschinen

Highly dynamic vertical center DMG Mori mill-tap 700 Traverse path x/Y/Z 700 x 420 x 380 mm Spindle BT 30 24 000 rpm water-cooled, swapped before 1200 h Table size 840 mm x 420 mm Control Siemens 840 D solution line Tool magazine with 25 places Direct Wegmessystem in X/Y/Z Renishaw measurement kit consisting of infrared Mestaster OMP 40 and tool measurement in the working area Chip conveyors, IKZ with 40 bar Coolant blowing air switching m commands Spuellpistole Oil mist separator Spannhydraulic incl 1 clamping circuit agregat / 2 lines 30 to 250 bar pressure range Interface for clamping the work table

Category: 209: other wood working machines
New in: 2002
Price: request quote
Location: Land-be BE
Seller: Vebim

Calibrating and/or squaring line with edge banding doing panels all round in 2 passes Panel width min/max: 220 / 1000 mm Panel length min/max: 320 / 3200 mm Edges max. 3 x 45 mm. Fixed side at the left Siemens SMSPC controls Line set up: Vacuum feeder Turning station length to cross Double end tenoner Turning station length to cross Double squaring and edgebanding Turning station cross to length Vacuum stacker 1.01 FEEDER, type CAR MS 2000 2-lane 1.02 TURNING STATION LENGTH-CROSS, type TR 100 90° turning of workpieces by means of 2 clamping discs 1.03 DOUBLE END TENONER, type SI_V 112 - schéma 4500 Squaring panels or calibrating/shaping solid wood panels Panel feed by chains, chain width 8 ...

Category: 101: boring mills and machining centers
New in: 2013
Price: request quote
Location: Land-de DE 89547 Gerstetten, Charlottenstr. 6
Seller: Luhan Werkzeugmaschinen

1 5-axis BAZ DMG-Mori Traverse path x/Y/Z 400 mm x 400 mm x 375 mm Control Siemens Sinumerik 840 D solution line with reading-mill Motor spindle SK 40 with 20 14 000 rpm NC rotary table B-axis-5 ° up to + 110 ° C axis 360 ° Chain magazine with 30 tool stations heat exchangers for spindle and table Infrared touch probe HEIDENHAIN TS 649 Spänneförderer, mode 4 Electr. Handwheel installed software for 3D quick set

Category: 209: other wood working machines
New in: 1996
Price: request quote
Location: Land-be BE
Seller: Vebim

Panel feed with chain, feed speed 8 and 16 m/min Top pressures with rollers Coil edges 0,3 to 3 mm, strips 0,3 to 13 mm. Edges up to 66 mm height Panel thickness 6 to 60 mm (limited to max. 45 mm for the end trims) Equipment: 1906 Glueing unit with hot melt cartridges 1901 Edge magazine with guillotine for coil edges 1926 Pressure rollers, pneum. loaded, 1 driven, 3 non-driven rollers 1916MF End trims, front and rear, motors 0,45 kW, straight and chamfer 1942 Top and bottom frims, motors 0,6 kW, tilting 1942M Multi-function top and bottom frims, motors 0,6 kW, tilting 1944 Buffing with oscillation Sound enclosure

Category: 207: gluespreader machines
New in: 1999
Price: 1.890 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Edge glue machine Fravol rapid / r 4 To glue thickness max mm: 15 to glue height max mm: 65 thickness of rolling material max mm: 3 workpiece length min mm: 60 feed max m/min: 16 feed continuously variable: Yes glue system granules: glue basin below caps saw unit: 2 Motors flush/RADIUS/chamfer stations: 2 strip Magazine: Yes A performing: legal machine CE mark: Yes total connection kW: 12.70 weight CA. 1225 kg Length: 3200 mm, width 1000 mm, height 1700 mm Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering ...

Category: 209: other wood working machines
New in: 1999
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges: coil edges 0,4 - 3 mm Panel thickness: 6 - 45 mm Equipment: 1902 Edge magazine 1906 Holt melt unit with cartridges 1902 Lateral pressure rollers 1973 MF End trimming, motor 0,3 kW 1942M Multi-function top and bottom frims, motors 0,6 kW, tilting

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Land-cz CZ 62700 Brno, Tu?anka 104 Tu?anka 104
Seller: Herr Radek Procházka

Control HEIDENHAIN... TNC 530 Shaft working diameter... 110mm X axis... 2000mm Y axis... 2000mm Spindle speed... 10-3000. INTERNAL COOLANT... 20 bar Axis W... 730mm Z axis... 1250mm Magazine places... 20 ISO 50 Clamping table surface... 1250x1400mm L x W x H... 4370 x 3850 x 3600mm The weight of the machine... 24050kg Maximum workpiece weight... 5000kg In very good condition, possible to try out under power.

Category: 209: other wood working machines
New in: 2013
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm When Workpiece thickness23-40 mm, 120 mm When Workpiece thicknesse 41-60mm 150 mm in relation to workpiece length Feed speed 11 m/min Equipment: Pre-Milling 2 X 2,2 KW Pre-heating of panel edge Glue aggregate A6 Coil edge magazine Pressure zone, central positioning End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight to angle Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece ...

Category: 102: lathes
New in: 2005
Price: request quote
Location: Land-cz CZ 62700 Brno, Tu?anka 104 Tu?anka 104
Seller: Herr Radek Procházka

CNC FANUC... 21i - TB Turning diameter... 500mm Turning length... 720mm Spindle bore... 76mm X axis... 290mm Z axis... 750mm Spindle speed... 340-3500 RPM Magazine places... 12 The weight of the machine... 5600kg L x W x H... 4332x2002x1997mm Power of main engine... 22kW Swing over bed... 620mm Rapid traverse of X axis... 20m / min Rapid traverse of Z axis... 24m / min Feed X... 290mm / min Feed Z... 750mm / min In very good condition, possible to try out under power.

Category: 209: other wood working machines
New in: 1999
Price: request quote
Location: Land-be BE
Seller: Vebim

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATI ...

Category: 102: lathes
New in: 2009
Price: 190.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Type of machine CNC turning and milling center make Gildemeister type CTX GAMMA 2000 TC year 2009 CNC control type storage location France country of origin Germany delivery after agreement cargo base free truck of verladem technical details Swing 700 mm turning diameter 600 mm turning length 1300 mm spindle speeds 500 rpm spindle bore 102 mm control Siemens 840 DSL Shop turn power 52 kW total power demand 70 kW machine weight 18.5 tons of space approx. 7 x 3 x 1.8 m lot Zub ehör, bezel Tools CAPTO C6 fold magazine 36 C-axis and B-axis + Y axis simultaneous Milling spindle with 36 compartment CAPTO HALTER SYSTEM and 12000 RPM lunette SMW klu 220 12 to 101 mm HIGH PRESSURE PUMP 20 B ...

Category: 209: other wood working machines
New in: 2004
Price: request quote
Location: Land-be BE
Seller: Vebim

Edgebanding line consisting of the following elements: - Infeed table PROFI TB 10/15/20 - Single-sided edgebander PROFI KR10/16/QA - Return conveyor PROFI ZHR10/S Workpiece dimensions (limited by infeed table): Workpiece thickness: 12-60 mm Length min. 250 mm, max 250 mm Width: min. 220 mm, max 1200 mm Workpiece dimensions for edge bander with manual handling: Length min 250 mm, max 4200 mm Width min 55 mm (long side), max 1200 mm Equipment PROFI KR10/16/QA - Feeding system SI14 for length- and crossfeed of the panels - Formatting on Portal left of machine, 4 kW motor, max 1300 mm - spraying station release agent - Pre-milling 2 x 4,5 kW - A34 gluing station - Magazine A3 for 6 coils and st ...

Category: 101: boring mills and machining centers
New in: 2013
Price: 80.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machine type machining center - vertical make MORI SEIKI type NVX 5100 II 5 axis year 2013 control type CNC storage France country of origin Japan delivery immediately cargo base EX WORK technical details Travel: X 1050 Y 530 Z 510 mm control: MSX 853 tool changer: 40 x with BT 40 y route 530 mm x way 1050 mm z-way 510 mm control MSX 853 table size 1350 X 600 mm speed range 12000 RPM tool holder BT 40 - Milling spindle 15/11 kW who kzeugwechsler - places: 40 stations tool change time 1 sec feed range 30 mm / min rapid traverse - longitudinal/transverse/vertical 30 m / min total power consumption 35 kW machine weight approx. 7200 kg space requirement approx. 3800 x 2600 x 2700 mm complete  ...

Category: 101: boring mills and machining centers
New in: 1995
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

x travel: 1020 mm y travel: 560 mm z travel: 400 mm --------------------------------------------------: WORKING RANGE -CUBIC-: - X-axis travel: 1020 mm - Y-axis travel: 560 mm - Z-axis travel: 400 mm - distance spindle nose - table surface (max.): 550 mm TABLE: - table surface (left-right): 1200 mm - table surface (front-back): 660 mm - workpiece load (max): 600 kg MILLING SPINDLE / HEAD: - spindle revolutions (max): 20000 /min - tool fixture: ISO BT 40: AXIS DRIVES: - traverse velocity X (min): 1 mm/min - traverse velocity X (max): 10000 mm/min - traverse velocity Y (min): 1 mm/min - traverse velocity Y (max): 10000 mm/min - rapid traverse X: 25000 mm/min - rapid trav ...

Category: 402: packing machines
New in: 1998
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Crate Palletizing and Depalletizing Station Simonazzi year 1998 This palletizing and depalletizing station was built by SASIB in 1998. The system was used for unloading empty bottle crates from pallets and loading full bottle crates on pallets. This system was working for a beer filling line with total capacity of 80.000 bph. The system includes one dublex depalletizer, one dublex palletizer, a faulty pallet (protruding nails, incorrect size etc) detection and rejection system, two pallet magazines and pallet conveyors. Crates are transported via conveyor belts and turned into proper orientation in a positioning table in each line. The line is still installed in a fair condition. Manuf ...

Category: 104: grinding machines
New in: 2002
Price: request quote
Location: Heilbronn
Seller: Gustav Schönberger GmbH

workpiece length: 570 mm max. workpiece diameter: 235 mm weight of the machine ca.: 2,8 t dimensions of the machine ca.: m max. grinding diameter: mm total power requirement: kW grinding length: mm Sinumerik 840D control 5-axes (X, Y, Z, A, C) 4-fold tool magazine for grinding quills support Pick up loader with pallet carrier Technische Daten: /technical details Werkstückdurchmesser maximal / max. workpiece diameter 235 mm Werkstücklänge maximal / max. workpiece lenght 570 mm Spitzenhöhe über Boden / center height over bottom 1100 mm Verfahrweg X-Achse längs / longitudinal travel X-axis 400 mm Verfahrweg Y-Achse quer / cross travel Y-axis 250 mm Verfahrweg Z-Achse vertikal /  ...

Category: 409: other packaging machinery
New in: 1998
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Automatic Crate Magazine Vertical Storage System SIMONAZZI An automatic crate magazine storage system made by SASIB in 1998. The system consists of two magazine storages. The larger magazine stacks crates in three parallel rows, it has two infeed and two outfeed lanes of conveyors and the storage capacity is over 600 crates. The other magazine has the capacity of over 200 crates, is built upon a single conveyor lane and both the infeed and outfeed are from the same side. The storage magazines have been used as buffers between crate washer and packer and before palletizer. The capacity of the original line was 80.000 bph. Technical data Manufacturer: SASIB Beverages S.p.A., Italy Year ...

Category: 101: boring mills and machining centers
New in: 2005
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1 ...

Category: 101: boring mills and machining centers
New in: 2004
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Vertical machining centre MAZAK NEXUS 410A Year of production: 2004 Control system: PC FUSION CNC 640M NEXUS Working hours: 73916 Worktable Table size 900 x 410 mm Max. table load 500 kg T-slots 3 count T-slot spacing 125 mm Travel X-axis stroke 560 mm Y-axis stroke 410 mm Z-axis stroke 510 mm Feedrate Rapid traverse rate: X/Y/Z-axis 36 m/min Spindle Spindle speed 35 - 12.000 RPM Tool shaft CAT 40 Main spindle motor 18.5 kW Tool magazine Turret tool capacity 30 max. tool diameter 80 mm with unoccupied adjacent station 125 mm Max. tool length 350 mm Max. tool weight 8 kg Machine-data Total power requirement 27.8 KVA Machine weight  ...

Category: 103: milling machines
New in: 1994
Price: used machinery auction RESALE 6.000 €
Location: Land-de DE Germany, 33758 Schloß Holte-Stukenbrock
Seller: Surplex GmbH

Weight approx.: 5500 kg x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm control: HEIDENHAIN TNC 426 Dimensions (l x w x h) approx.: 4000 x 3500 x 2000 mm turning speed range: 20 - 4200 rpm rapid travel range: 10 m/min table surface area l x w : 1200 x 560 mm tool taper: SK 40 Description: HERMLE UWF 1202 H CNC Toolroom Mill - spindle drive: 11,5 kW - table load: 700 kg - tool magazine places: 34 pieces - inclusive chip conveyor, internal coolant supply, paper belt filter and documentation

Category: 706: beverage machines
New in: 2000
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Bottle Washing Machine KHS Innoclean EE52/87 S22N, 70 000 bph Single end bottle washing machine by KHS Innoclean, manufactured in year 2000 with two pre-cleaning section, two caustic zones and three fresh water rinsing zones. Nominal capacity is 70 000 bph and this machine used for 0.5 liter of glass bottles, but also it can be used for 0.33 liter bottles. The machine is stopped in year 2015 and in 2016 of November will be dismantled and packed. The equipment is in good condition and ready to delivery. Manufacturer: KHS Manufacturer type: Innoclean EE52/87 S22N Year of manufacturing: 2000 Capacity: 70 000 bph Total operating hours: 95 000 Control PLC: Siemens Simatic S7 Gen ...

Category: 101: boring mills and machining centers
New in: 2005
Price: used machinery auction RESALE 9.600 €
Location: Land-de DE Germany, 79774 Albbruck
Seller: Surplex GmbH

Weight approx.: 10000 kg Dimensions (l x w x h) approx.: 4550 x 2680 x 2830 mm Description: serial number 200 N 112, travels X/Y/Z 1500 x 660 x 610 mm, table 660 x 1700 mm, table capacity 1500 kg, spindle speed 15000 rpm, control HEIDENHAIN ITNC 530, with electronic hand wheel, tool magazine with 48 tool places, tool holder SK 40, including chip conveyor, roller trolley with tool holder, machine is under power and was mainly used for woodworking

Category: 101: boring mills and machining centers
New in: 2002
Price: 19.500 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machine type machining center - vertical make LGB type PFCNC 10050 year 2002 control type CNC storage France country of origin france delivery immediately cargo base in stock, free truck loaded technical details x way 1000 mm y-way 500 mm z-way 600 mm table size 1100 x 610 mm ISO 40 spindle adaptor drilling capacity in St 60 - full drill 45 mm thread cutting up to M 24 speed range - continuous 20-12000 RPM feeds - longitudinal/transverse/vertical 1 - 5000 mm / min rapid traverse 20 m / min tfernung spindle/table number of the tool magazine stations 40 tool diameter if full 100-608 mm 80 mm tool diameter with 2 outdoor courts 125 mm tool length of 380 mm max tool weight of kg 7 tool change ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

4 rows, cap. 6700 pcs./h/ 5 rows,cap. 8400 pcs./h,\r\ninclude\r\nintermediate proofer I + II, moulder, roll cutting device,\r\nheating + sterilization, setting machine, magazine for proofing frames\r\n

Category: 101: boring mills and machining centers
New in: 2000
Price: 30.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machine type machining center - universal make DMG type DMU 70 V year 2000 control type CNC storage France country of origin Germany delivery immediately cargo base EX WORK technical details x way 750 mm y-way 600 mm z-way 520 mm table size ø 700 x 500 mm spindle retainer for SK 40 spindle speeds - variable 20-10,000 rpm feeds - longitudinal/transverse/vertical 20,000 mm / min rapid traverse 50 m/min tool changer 32 tool length of maximum tool weight of 315 mm ma x 6 table load of Max 0.35 t machine weight kg approx. 7 d additional information CNC HEIDENHAIN TNC 430 MAGAZINE 32 PROFESSIONAL SK 40 10000 RPM UNDER CURRENT

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

o.k. for pans + proofing boxes 78/98 x 58 cm \r\nincl. magazine for pans + proofing boxes\r\n

Category: 101: boring mills and machining centers
New in: 1995
Price: request quote
Location: Land-de DE Furtwangen
Seller: A-Z Maschinenwelt

Note: 4th axis isn't going. Main spindle should be overhauled in the times. Technical data: Brand: Mazak Type: VTC 20 B Control: Mazatrol M 32 B Year: 1995 x trail 1,120 mm y way 510 mm z-way 510 mm Control M plus Mazatrol Distance from spindle / table 180-690 mm Spindle Center to column distance 550 mm Maximum torque 7,14Nm Toolholder SK 40 Work table: table size 1,460 x 510 mm maximum table load of 500 kg Number of T-grooves 5 T slot distance 100 mm T slot width 18mm Tool Magazine: Number of tool positions 24pos. Max tool diameter 80 mm Max Werkzeugdurch. free neighboring box. 110mm maximum tool length 350 mm maximum tool weight 8 kg Total weight Max  ...

Category: 101: boring mills and machining centers
New in: 2010
Price: request quote
Location: Bremen
Seller: Klaus Rosenboom GmbH

x-travel: 1500 mm y-travel: 700 mm z-travel: 610 mm table surface area: 1700 x 700 mm control: Fanuc 18i MB rapid traverse: 36 m/min table load: 2,0 t turning speed range: 15- 12000 U/min max. torque on the spindle: 191 Nm power capacity - milling spindle: 30 kW internal coolant system feed: 20 bar no. of tools in the magazine: 48 Stück tool taper: SK 40 weight of the machine ca.: 10,1 t dimensions: 4,475 x 2,952 x 3,03 m very nice cross table machine with 4.th axis Lehmann 180 mm peak hight - internal coolant with filtersystem - BigPlus spindle - absolut scale in all axis - spindle oil cooler - prepared for 3-D measuring - 4 GB memory - oil dust collector - ext. electr. hand wheel - manual ...

Category: 101: boring mills and machining centers
New in: 2015
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904986 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Year of constr.: 2015 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 Ã? 2 ...

Category: 109: other metal working machines
New in: 2009
Price: request quote
Location: Kunde
Seller: Klaus Rosenboom GmbH

faceplate diameter: 2000 mm swing diameter: 2400 mm turning height: 2000 mm max. workpiece weight: 20.000 kg vertical adjustment of the crossrail: ------- mm travel -x axis: 2400 mm travel -y axis: 2400 mm travel -z axis: 2000 mm control: Siemens 840D number of controlled axis: 3 turning speed range: 2 - 224 U/min power capacity: 80 kW rapid speed: 6 m/min max. torque on the faceplate: no. of tools in the magazine: 60 Stück milling drive: 37 kW turning speed range - milling: 2000 U/min Number of working hours: 750 h weight of the machine ca.: 100 t dimensions: 10,5 x 10,5 x 7,0 m CNC- VTL with milling- and grinding spindle. Condition like new. - coolant system and chip conveyor KNOLL - dig ...

Category: 101: boring mills and machining centers
New in: 2015
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904987 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Year of constr.: 2015 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 Ã? 2 ...

Category: 109: other metal working machines
New in: 1967
Price: used machinery auction RESALE 3.000 €
Location: Land-ch CH Switzerland, 8406 Winterthur
Seller: Surplex GmbH

Weight approx.: 15000 kg Dimensions (l x w x h) approx.: 18000 x 3500 x 2200 mm Description: Capacity for drawing of the bars approx. 20 t, length draw bench approx. 10 m, bar length max. 6000 mm, the bars are drawn by form dies, including drawing sledge with 4 rollers and chain drive, drive via electric motor and gear ratio, dimensions draw bench approx. 12000 x 3000 x 1800 mm, weight approx. 10000 kg, bar loader magazine with plastic immersion bath container, magazine width approx. 1400 mm, length immersion bath approx. 6700 mm, width approx. 360 mm, depth max. 220 mm, bar lifting unit pneumatically hycraulically operable, including further accessories, dimensions immersion bath including  ...

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904988 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Construction year: 2014 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 à...

Category: 104: grinding machines
New in: 1963
Price: used machinery auction RESALE 4.000 €
Location: Land-ch CH Switzerland, 8406 Winterthur
Seller: Surplex GmbH

Weight approx.: 11000 kg Dimensions (l x w x h) approx.: 12000 x 4000 x 2000 mm Description: Max. bar length ca. 6000 mm, max. bar diameter approx. 25 to 60 mm, grinding disc width approx. 255 mm, grinding disc diameter 1 x 500 mm, 1 x 320 mm, dimensions grinding system approx. 3500 x 1500 x 1700 mm, weight approx. 4500 kg, control cabinet 2900 x 500 x 1800 mm, including a bar loading magazine and a bar removal magazine, length each approx. 6000 mm, magazine depth max. 850 mm, dimensions each approx. 6000 x 2000 x 1500 mm, each approx. 1000 kg, including accessories/rulers 25 to 60 mm diameter

Category: 101: boring mills and machining centers
New in: 2007
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904998 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of manufacture: 2007 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 80 ...

Category: 104: grinding machines
New in: 1961
Price: used machinery auction RESALE 4.000 €
Location: Land-ch CH Switzerland, 8406 Winterthur
Seller: Surplex GmbH

Weight approx.: 11000 kg Dimensions (l x w x h) approx.: 12000 x 4000 x 2000 mm Description: Serial number 15664, max. bar length approx. 6000 mm, max. diameter of the bars approx. 20 to 50 mm, grinding disc width approx. 255 mm, grinding disc diameter 1 x 500 mm, 1 x 320 mm, dimensions grinding system approx. 3500 x 1500 x 1700 mm, weight approx. 4500 kg, control cabinet 2900 x 500 x 1800 mm, including a bar loading magazine and a bar removal magazine, length each approx. 6000 mm, magazine depth max. 850 mm, dimensions each approx. 6000 x 2000 x 1500 mm, each approx ca. 1000 kg, including various rulers diameter 20 to 50 mm

Category: 101: boring mills and machining centers
New in: 2010
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905003 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of construction: 2010 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 8 ...

Category: 107: sheet metal working
New in: 1959
Price: used machinery auction RESALE 2.000 €
Location: Land-ch CH Switzerland, 8406 Winterthur
Seller: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 18000 x 3000 x 2000 mm Description: Bar straighteners with 3 rolls, bar length max. approx. 6000 mm possible, roll diameter 3 x 300 mm, including gear drive and electric motor, max. bar diameter approx. 20 to 80 mm, speeds at 3° roll inclination 6 to 15 m/min, dimensions of the straightening machine approx. 4500 x 2200 x 1700 mm, 5000 kg, including a bar loading magazine, magazine width approx. 1000 mm, dimensions of the loading magazine approx. 9000 x 2000 x 1200 mm, including bar ejector with tilting movement, including new and overhauled rolls, diameter approx. 350 mm and 2 x 200 mm, ball bearings from SKFas new, type 3 x 24026 CC/W ...

Category: 101: boring mills and machining centers
New in: 2009
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905004 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of manufacture: 2009 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 80 ...

Category: 101: boring mills and machining centers
New in: 1998
Price: request quote
Location: Lager Grevenbroich
Seller: STEINHAND GmbH

travel -x axis: 710 mm travel -y axis: 520 mm travel -z axis: 520 mm Control: Heidenhain - Millplus weight of the machine ca.: 7,5 t WORKING AREA -CUBIC- - Number of machining axes (without parallel axes) 5 - 5 simultaneous CNC axes - Travel X-axis 710 mm - Travel Y-axis 520 mm - Travel Z-axis 520 mm TABLE - clamping surface diameter 700 mm - Workpiece weight (max) 310 kg - Positionability 360 ° - Positionability 180 ° MILLING SPINDLE / HEAD - Spindle type: vertical - Speed range of 20 / min - Speed range up to 12000 / min - Tool holder: ISO SK 40 axis drives - Feed of 1 mm / min - Feed up to 10000 mm / min - Rapid traverse 30000 mm / min TOOL MAGAZINE - Number of tool positions 60 DIMENSI ...

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905006 Number: 1 PCs. Manufacturer: STAMA Type: MC 531 / S Control: Fanuc 18i M Year of construction: 2001 State of preservation: second-hand machine Stories about: 1 layers DESCRIPTION MILLING Travel in X 1600 mm Travel in Y 400 mm Travel in Z 350 mm Maximum rapid traverse in X/Y/Z 45/45/45 m / min Maximum feed speed in X/Y/Z 10/10/10 m / min Maximum acceleration in X/Y/Z 3/7/12 m / s2 Feed force in the X/Y/Z 7000/7000/12000 N Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 9000 1/min Maximum power with ED 10-40 / 100% 48/14 kW Maximum torque at ED 10-40 / 100% 154/45 nm Spindle diameter in front bearing 65 m ...

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Canada
Seller: ProdEq Trading GmbH

pressure: 60 t throat: mm stroke: mm --------------------------------------------------: PRESS FORCES: - total force (nominal): 60 to incl. Robot (with gripper): + Manufacturer: Fanuc + Type: M-6iB + Serial No.: 250209 + Controller: R-J3iB + Magazine (with 6 stations) + Conveyor + Drop Gauge with 2 lines (OK, NOK) + Manual Spider + Safety Fence

Category: 101: boring mills and machining centers
New in: 1995
Price: request quote
Location: Land-de DE 73563 Mögglingen, Serenwaldstr. 10
Seller: WMH24

Control Mazatrol M 32 Travel X / Y / Z: 1120 x 510 x 510 mm Spindle speed 7000 min-1 Tool magazine for 24 tools, SK 40 Table size 1460 x 510 mm

Category: 101: boring mills and machining centers
New in: 1996
Price: request quote
Location: D-59302 Oelde
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

x-travel: 500 mm y-travel: 380 mm z-travel: 380 mm control: TNC 426 Heidenhain Main spindle:: turning speeds: max. 8.000 min/-1 power capacity - main spindel: 15 / 10 kW tool taper: SK 40 feeds:: rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 30 m/min rapid traverse Z-axis: 30 m/min feed power: 5 kN tool magazin:: tools in tool magazin: 24 max. tool length: 200 mm max. tool diameter: 50 mm max. tool-dia with free toolbox: 100 mm work table:: surface area: 800 x 480 mm T-slot - distance: 63 - 14H7 mm max. table load: 500 kg total power requirement: 24 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,7 x 5,4 x 2,8 m Documents: Coolantsystem: hydraulic system:  ...

Category: 101: boring mills and machining centers
New in: 1996
Price: 23.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

M machine type machining center - universal make MATEC type 30 L year 1996 control type CNC storage Switzerland origin state of Baden - Württemberg delivery time upon request of freight basis EXW P Technical details x trail 2000 mm y way 420 mm z trail 500 mm control HEIDENHAIN TNC 407 table dimensions 2500 X 630 mm slot number 7 T-18 H8 grooves 100 mm speed range mm T - slot distance 6000 RPM power at 40% / 100% ED 30 / 17 KW torque at 40% / 100% ED 190 / 120 NM Feed x/y/z 30 m/min tool length of 350 mm max tool weight of Max 10 kg tool diameter 70 mm tool diameter with free Nebenpl. 130 mm tool holder SK 40 tool magazine with 36 seats total power 45 kW machine weight 10 tons of spac ...

Category: 101: boring mills and machining centers
New in: 2013
Price: used machinery auction RESALE 16.670 €
Location: Land-ch CH Switzerland, 9016 St. Gallen
Seller: Surplex GmbH

Weight approx.: 4350 kg Dimensions (l x w x h) approx.: 2700 x 2000 x 2600 mm Description: DECKEL MAHO Milltap 700 Machining Centre Spindle is removed and defective Chip disposal package Control Siemens 840D Solution Line Digital Progress Panel Preparation 4th axis Lehmann EA-510. Leco indirect Spindle speed up to 24. 000 rpm BT30 Tool magazine 25 places Direct displacement encoder X,Y,Z Sealing air for direct measuring systems RENISHAW probe kit for MillTap 700 Flushing gun for chip flushing Software package Job Shop and Sinumerik Mdynamics Handwheel for setup operation CE-version Documentation-1 French Display screen German/French Main machine 2300 x 1700 x 2600 mm, 4000 kg, chip conveyo ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)