127,375 used machines on RESALE, but how to find them? Machine Search
A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveill ...
Key data: 750 kN, 40 mm
Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Table dimensions: 1000 x 800 mm Auction-ID: A7-46287-9
Rotating tractor, parts in order and ready to be attached to the tractor. Auction-ID: A3-43520-39298
2022 battery , towbar rear , flash light , blue spot , parking lights Auction-ID: A3-43519-257
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
In working order Diesel and Petrol Auction-ID: A3-43519-17307
Functional - already in use Auction-ID: A3-43519-35587
Load capacity: 2500 kg Fork length: 1150 mm Auction-ID: A7-46287-126
Machine Type: Pulse Arc Inverter Welding Machine Make MERKLE Type HighPULSE 452 DW Plant No.: 93.828 Connection voltage 3 x 400 volts Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 26 Fuse 32 Amps Dimensions L x W x H 1,100 x 490 x 1,000 mm Weight 140 kg Age 10 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer with 2 pressure gauges 1 piece spare parts box complete Equipped 18 months w ...
Product number: 3014 Belt width: 400 mm Infeed height: 770 mm Outfeed height: 1320 mm Pitch: 400 mm Dividers: 80 mm Power: 3 x 400V, 50Hz, 0.3kW Dimensions: 2000 x 600 x 1600 mm
LHS Lagertechnik. NEW AND USED SHELVING SYSTEMS OF ALL KINDS. On 20,000m² - Pallet racks - Multi-storey stages - Shelving racks - Cantilever racks - Tire racks - Packing tables - and much more Various manufacturers in different sizes and lengths immediately available from stock Kaarst Manufacturer examples: Jungheinrich, Bito, Meta, Thyssen, Stow, SLP, Dexion, Galler, Schäfer, ! Currently over 10,000 pallet spaces IMMEDIATELY available We will be happy to make you an individual offer tailored to your needs (lengths / heights / loads). Demand and system determination of existing systems is also possible. The indicated price serves as a guideline for used goods and refers to gross per parking space incl. 19% VAT. Purchase / assembly and disassembly / rack inspections can also be offered. ! Do not hesitate to contact us !
Intermediate dough chamber Intermediate chamber for resting (rising) the test after its shaping They are characterized by high-quality workmanship and maximum reliability Also, all models are mobile Rest time: 6.5 minutes Capacity: 1800 - 2000 pcs/h Number of vessels: 238 Container capacity: 100 - 1500 gr Dimensions: 1700 x 1700 x 2200 mm Dough inlet height: 930 ± 20 Dough outlet height: 1050 ± 100 Electrical power: 0.55 kW Machine weight: 700 kg
For sale is a high-quality industrial picking crane from the manufacturer VETTEN Krane & Service GmbH, specially developed for the efficient storage and picking of long goods such as steel pipes, steel bars and other elongated goods. This particular model was made in 2016 and is in excellent condition. It is ideally suited for the fully automated handling of long materials in industrial environments such as warehouses, production facilities and logistics centres. Technical details: - Manufacturer: VETTEN Krane & Service GmbH - Year of construction: 2016 - Type designation: ZLK 5tx23550 S - Load capacity: 10 tons - Net weight: 36 tons - Factory number: 16-215302 Features and Benefits: - Efficient material handling: significant time savings and efficient use of storage capacity - Automated processes: fully automatic handling of long goods, reduction of personnel costs, increa ...
Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive ...
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit
For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2
VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Connection: 230V Auction-ID: A1-46037-29
Equipped with Joskin distributor, Auction-ID: A1-40136-193
Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...
VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Caterpillar C4.4 - Unused - 110 kW - JKT
Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design f ...
Injection Unit Screw Diameter: Ø 70 Injection Volume: 1,239 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 4,500 kN (450 t) Clamping System: Two-platen design (Jupiter II series) Platen Size (H × V): approx. 1,140 × 1,040 mm Mould Opening Stroke: 950 mm Max. Daylight Opening: approx. 1,650 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 100 / 70 kN Drive & Control Drive Type: Servo-hydraulic system Main Motor Power: 62 kW Full Load Current: 104 A Short Circuit Rating: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Haitian KEBA touchscreen control Equipment / Features Clamping Concept: Two-platen system for space efficiency and ...
B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC
maximum number of results exceeded
please refine your search
100 € 
